Printable View
So I get a crunching noise in neutral when I press my foot down on the clutch and slowly let it out. It happens on the way out. Also in between gears when changing..
Mechanic has told me its "all the bearings in the gearbox" and it's gonna cost 2 gran...
Anyone know if this is true? Or have a good mechanic. I think this one is a little to difficult for diy
Thanks guys
sounds more like the input shaft bearing....common to fail on B and D series motors/setups.
Only way to find out is to drop the box , open it up and go from there.
Do you get any difficulty getting into gears ?
I would recommend at the minimum , replacing the input shaft bearing , counter shaft bearing and release bearing (clutch side).....not $2k !
Pm me if you want this done quickly cheaply and efficiently in Sydney.
sounds like the thrust bearing has failed
does it make noise on heavy acceleration with the clutch fully released ?
Can't hear to be honest.. It's pretty loud
def not 2k for all bearings
probably cost 1k max
bearing kit probably 300 and labour 600-700
http://img.tapatalk.com/d/12/09/11/amega5uj.jpg
Ye. So that aswell as input shaft bearing and clutch release bearing.
Thanks to Ben on this forum for fixing it. Best mechanic I can recommend for Hondas.
So replaced with an exedy hd organic clutch.
Never use a non heavy duty clutch in a type r motor!
thanks for the update ayyyyyyyyyyyyy
http://mipietech.us/images/884.jpg
Quote:
Originally Posted by mocchi
Oh Hell yeah.
Bloody hell
What brand was that clutch disc?
Quote:
Originally Posted by EKVTIR-T
Something made in korea. (he) bought it from repco i think ?! Guiz , stick with exedy.
http://clutchindustries.com.au
"
Clutch Industries is the largest and most experienced clutch manufacturer in Australia – with more than 50 years of local manufacturing including the design development and production of products for OEM and aftermarket clients, we have unrivaled local resources upon which to call. Your assurance that the clutch kit you buy form an authorsied CI dealer has been locally tested to meet the demands of Australian and New Zealand customers.
"
ye sick..
Damn,Ive used the RPM heavy duty ones before and loved it..Quote:
Originally Posted by Hellomotog
yours was shocking though,glad you got it sorted now :)
this one i dont think was heavy duty. i asked for one at repco and this is what they gave me.
this pedal is much heavier now. i.e. much stronger pressure plate