BTCC & WTCC 2012/VTEC Challenge/Civic Cup

In the BTCC the season is drawing to a close with quite a few teams vying for the title. Team Honda (Shedden/Neal) are the team to beat but Team MG (Plato) is charging hard, he just needs a bit of luck and not be taken off by also-rans.

Team Pirtek (Jordan) is also up there in his Honda.

In the WTCC I read that the New Civic is being tested by Monteiro and Tarquini, ready for next year. Monteiro will drive a car in the Asian leg of the series so that should be something to see. Tarquini is still in the Seat team so he cannot drive the car in competition until 2013.

All in all in should be an interesting 2013 for Honda.

In other news, both the Civic Cup and VTEC Challenge are going strong in the UK, with larger fields at recent events.

http://www.traxshows.co.uk/files/201...ic-985x630.jpg

http://www.racingexposure.com/blog/w.../anglesey1.jpg

Peter

i wish we could get local races like that here in Aus.

Honda Cup in OZ? one day...

Quote:

---

Originally Posted by Benson

Honda Cup in OZ? one day...

---

If the Hyundai Excel boys can organise races I can't see why we couldn't organise something similar to VTEC Challenge with different classes based on performance/mods (like the HondaNationals). I have made some enquiries to the VTEC Challenge organisers and the Buddy Club Civic Cup but I think the latter is a little too restrictive (to just Civics).

We need something that gives everyone a chance to race, a little less intense than IPRA (not that that is a bad series; quite the contrary).

You still have to have licencing (CAMS), full safety gear (rollcage, suit, gloves, helmet,etc) and car scutineering, all of which costs money, then entry fees and circuits willing to give you tracktime.

Many don't want to go to that extreme (esp. putting rollcage in their car) and that is always going to be the obstacle.

Still, we can dream.

Peter

I have the Sporting & Technical Regulations for a number of club-level race series (Excel Cup, VTEC Challenge, Civic Cup, IPRA, CAMS sanctioned and AASA sanctioned, including licencing.)

I am also in contact with CAMS and AASA regarding basic information about setting up a series.

If anyone is interested, you can contact me here via PM in the first instance.

Getting a Series up and running is no easy task, and may be close to near impossible but a bit of time and effort expended exploring the possibilities can't go astray.

Peter

If I read the Buddyclub Civic Cup correctly from last time, weren't all cars already race ready packages to be purchased from Buddyclub? Or am I thinking of something else?

Anyway getting a series running in Australia would be interesting though perhaps State based maybe easier logistically and financially then a national cup?

Quote:

---

Originally Posted by DreadAngel

If I read the Buddyclub Civic Cup correctly from last time, weren't all cars already race ready packages to be purchased from Buddyclub? Or am I thinking of something else?

---

No you're right (sort of). You can build your own car but you have to abide by all the regulations (that specific Buddy Club products in key areas). To start the Series off, several cars were built and sold to competitors.

Quote:

---

Originally Posted by DreadAngel

Anyway getting a series running in Australia would be interesting though perhaps State based maybe easier logistically and financially then a national cup?

---

Definitely a State-based Series, not National. In fact, along the lines of the Excel Cup, all races are held at the same track (in Queensland). Here I would think Wakefield Park as SMP would be too expensive.

Thanks for your comments.

Peter

Quote:

---

Originally Posted by jdm_b16a

I have the Sporting & Technical Regulations for a number of club-level race series (Excel Cup, VTEC Challenge, Civic Cup, IPRA, CAMS sanctioned and AASA sanctioned, including licencing.)

I am also in contact with CAMS and AASA regarding basic information about setting up a series.

If anyone is interested, you can contact me here via PM in the first instance.

Getting a Series up and running is no easy task, and may be close to near impossible but a bit of time and effort expended exploring the possibilities can't go astray.

Peter

---

Man that'd be awesome :) I'd be down in a few years when I'll be able to fund my racing (hopefully)

Unfortunately the Honda "scene" here in NSW (and probably Australia wide) is such that a series like the one I've been following in the UK (VTEC Challenge) will most likely never happen. I am buoyed by the fact that series like this happen in SE Asia, and that Hondas have featured strongly in Japan and Hong Kong events over the years. But I doubt there are enough interested parties willing to commit to such a series, and for it to be viable you need a strong field, sponsorship and ongoing logistics. But who knows.

Peter

Sponsorship - I guess start off with the official/big distributors/dealers of Honda tuning parts like J's Racing [JDMConcept?], Buddyclub, Spoon, etc see if they want to jump in? Then after that

Competitors - Mix of pros/workshops and privateers with some sort of regulations like say N1/N2 for example? Which should keep cost and competition controlled and within reach of most? Or Perhaps something like GT300/GT500 that allows two classes?

How many Honda car's do you need to make it a viable series?

any chassis with stock B18, IHE, Coilovers, 16 Rims, control R compound tyre, CAMS Cage.

makes it easy for every one and not over the top spending.

Quote:

---

Originally Posted by DreadAngel

Sponsorship - I guess start off with the official/big distributors/dealers of Honda tuning parts ...

---

I think the basics need to be sorted first - sporting regulations and rules, car specs, events (eg no. of races x no. of events)

Quote:

---

Originally Posted by Benson

How many Honda car's do you need to make it a viable series?

---

Benson, I think anything over 15 would be spectacular but overall you want about 20+ to give everyone a chance to race throughout the field, plus to provide exposure to spectators and sponsors.

Quote:

---

Originally Posted by Riced_Civic

any chassis with stock B18, IHE, Coilovers, 16 Rims, control R compound tyre, CAMS Cage.

makes it easy for every one and not over the top spending.

---

A good start Mr. Riced but I think you have to allow categories to maximise entries so here's my thinking

Category 1: Dseries 1.5 and 1.6

Category 2: Bseries 1.6 and 1.8

Category 3: BSeries 2.0 plus HSeries

Category 4: KSeries 2-.0/2,4 +

Each of these four categories will have basic freedoms - intake, exhaust, brakes, but limited engine mods plus suspension mods - rollbars, coilovers, strut bracing

Basic safety features for everyone along CAMS lines - fuel, rollcage, seat, fire extinguisher, etc

Control tyre and control fuel.

That's just my thinking at this point. I need to investigate more with the UK guys, talk to CAMS and AASA, plus talk to the circuit (Wakefield Park)

Peter

Keep the ideas coming guys - it inspires everyone to think that this might be possible if not 2013 then maybe 2014.

Further to my thoughts about categories ...

So Category 1 would exclude ED/EF Civics with B swaps

Category 2 would exclude all models with non-standard engines (that is, EGs with K series swaps)

The categories would be

Category 1 - All models using a 1.5 or 1.6 D series engine as standard. No models before 1988.

Category 2 - All models using a B Series as standard

Category 3 - Preludes, Accords using H Series (or F Series) as standard

Category 4 - All K Series models including Accord Euro, Integra R

Anyone want to have a go at ascribing models to each of these categories?

As far as the roll cage is concerned it would have to meet current safety specs as prescribed by CAMs so full cage, welded in.

Control tyre could be any manufacturer (probably invite tenders here and see what comes up)

Strut bars can be upper & lower, front & back

Control fuel eg. 98 octane but not E85.

Suggested rim sizes would be 15in for categories 1 & 2; 17in for categories 3 & 4.

Peter

Peter, have a look into New Zealand Honda Cup series. Its so popular over there that they are selling grid spots!

I could be down for this. put a Dseries in the civic :p

By standard I mean "Australian delivered" as some might say, for example, that EF came with B16A in Japan.

Peter

I have created a new thread "Honda Challenge Australia". Can we continue the discussion there?

Peter