Printable View
I've got a 2004 Honda Accord Euro, My air conditioner compressor has giving up and from what I've been told, the compressor clutch has came apart.
The compressor is typically very expensive to buy from a Honda Service centre, therefor I've been looking at alternatives on Ebay and such.
Is there any variances that i should be aware of, from buying it off an online supplier?
Do i need additional things such as an accumulator, oil, o-rings kit?
Thanks.
cool drive in sydney
you will need a drier
Would you recommend this?
http://www.ebay.com.au/itm/Honda-Acc...597#vi-content
thats abit pricey, get a 2nd hand one from a wrecking yard. Should be less than half the price of that.Quote:
Originally Posted by AYRTON
wouldn't bother buying second hand compressors, it's like buying second hand dryers,
no point buying second hand because you dont want to do the job again. might as well spend that bit more and get it right the first time.
i think most honda dealers outsource the job. i had mine replaced, $2.2k Honda wanted $2.9k. Problem is compressor seizes and pushes metal filings right through the system and it all needs to be flushed out. Wasnt too happy
I recently replaced my compressor, tx valve and condenser... purchased the parts from www.rockauto.com in the US. Shipping is obviously a bit more expensive but still cheap in comparison to buying locally.
Shipping was very fast too and could be tracked through the FedEx website.
I paid a total of $700au delivered for the parts above.
Are there any telltale signs that a compressor failure is imminent? I would rather replace mine before it sends shards of metal through the whole system, if I can identify it before it happens...
Well i had same problem happen to mine ... thing was i had an accident a few years before and had the goood ol aami lifetime warrenty to replace it because they never flushed the A/c system... but with mine i went a A/c compressor from the CRV i think from memory and it was actually smaller pulley diameter than the CL9 one and i just needed a different belt lol. because supposable its common in the CL9 =(
sad sad sad... i have same problem on my Accord Euro 04 too..... so how much you guy fix it in the end?? i got quoted for almost $2000..... any cheaper way to fix it????
will a tsx one fit??
most likely. make sure the parts fit the same engine/chassis, just to be sure.
Just looking at the rockauto site - how did you decide which brands to get? Each component has different brands and I'm not sure where to start. GPD seems the cheapest and has all the parts I need (compressor, condensor, TXV, dryer/accumulator), but I'm happy to pay extra if there's any benefit (i.e. quality and/or durability).Quote:
Originally Posted by luxobarge
Hi Luxobarge
Could you let us know which model numbers for the compressor,etc?
I don't think the Acura TSX has the same compressor as the Australian Honda Accord Euro???
ThanksQuote:
Originally Posted by luxobarge
why not?Quote:
Originally Posted by deco0028
Hi
The part numbers are different.
Tried 38810 RBA 006( Accord Euro compressor), but no such listing for any Acura cars on US websites.Quote:
Originally Posted by Fredoops
Belt is the same, so same sized pulley. Looks like the casing is the same to, just has a 3 pin connector instead of 2. Think if you search you will find someone from South Africa who used a TSX compressor by swapping over their old wiring.
Also, if you search the local part number, you will likely find after-market compressors, but the pictures might not match. Think they are taken from the JayAir catalogue which has the wrong part pictured.
it's a
Keihin HDK238
plenty of aftermarket companies make compatible compressors.
Thanks, Fredoops.
Quote:
Originally Posted by Fredoops