Civic FD MY10 (2010) - FD2R Front Bumpers?

Printable View

18-08-2014, 02:21 PM
Daniel.29

Civic FD MY10 (2010) - FD2R Front Bumpers?

Hey all,

First off, I'd like to say I'm very new to this site, and so where I may make mistakes, feel free to fix me up. But that aside, I was just wondering if the factory front bumpers on the FD 2010's are that of the FD2R (Type R) bumpers? They look very much alike, if not the same, minus the grille mesh.

Is this true, or am I just seeing things?

On top of that, I am aware that the FD2R body kit does not fit on the standard FD1's (do correct me if I'm wrong) due to different width issues, I think, but I was just wondering if this 2010 FD bumper will fit on my 2008 FD VTI-L? I only ask this, as the FD2R bumper looks nicer than the stock 2006-2009 bumpers, and that my current bumper is kinda smashed up from a car accident (wasn't my fault), and I was hoping to have it replaced.

Hopefully someone has the answers to my questions.. I'll say thanks in advance to those who contribute. Not sure how successful this thread will be, haha...

Cheers.
18-08-2014, 02:51 PM
SharkChu

FD2R bumper is different to our FD bumpers. You need to trim part of the reinforcement bar at the front to get it to fit. In terms of the body kit, the side and the rear fits fine. Just the front needs the slight mod.

When Jprak enters the conversation, he can help you more. haah

Welcome
18-08-2014, 03:02 PM
Daniel.29

Hey mate, thanks for your response.

I understand that the FD2R bumpers are different to the FD1 range, and it won't fit directly without a bit of tweaking. I was wondering if the factory 2010 FD front bumper would fit? This is what I'm talking about.
http://liveimages.carsales.com.au/ca...Pad&width=1050

I'm not sure if anyone else sees it, but to me, this looks very much so like an FD2R front bumper to me, haha... Maybe just gut out those plastic fillers and install some meshing.
18-08-2014, 03:28 PM
NeedVtec

Do you mean facelift onto preface lift?
18-08-2014, 03:52 PM
Honda_FD

FD1 and FD2 are the same. Body wise.
FD2 is the sports edition. But thats another topic.

What you are talking about is preface lift and face lift.
Preface lift is 06-08
Facelift is 09+

And yes. The face lift SHOULD fit the preface
18-08-2014, 04:26 PM
Daniel.29

Oh, thanks guys. Sorry, wasn't aware of what it was called; my bad...

I know that the FD1/2 are the same, body-wise, of which only the FD2R is the one with a wider front or something like that. But yeah, thanks for clearing that up. :)

Anyways...Where can I source a facelift front bumper here in Melbourne? And can I also knock out those plastic filler things where the foglights are to install mesh grille for that FD2R look? (Or is that like a super ricer thing to do...)

And with a facelifted bumper...is one able to install these things from the J's racing design?
http://i01.i.aliimg.com/img/pb/119/5...540119_137.jpg
18-08-2014, 07:12 PM
Honda_FD

Quote:

Originally Posted by Daniel.29

Oh, thanks guys. Sorry, wasn't aware of what it was called; my bad...

I know that the FD1/2 are the same, body-wise, of which only the FD2R is the one with a wider front or something like that. But yeah, thanks for clearing that up. :)

Anyways...Where can I source a facelift front bumper here in Melbourne? And can I also knock out those plastic filler things where the foglights are to install mesh grille for that FD2R look? (Or is that like a super ricer thing to do...)]

Yes you can knock them out an put mesh there. The plastic is held in by 1 screw.

As of the Js air duct. Im not sure
18-08-2014, 08:05 PM
jprak

hello all

yes facelift looks like a fd2R but it isnt.

the airducts of Js racing not sure it'll fit but cant confirm as i havent bought a set.

ive put a Js lip on the facelift bar and it fits with minor mods

http://img.tapatalk.com/d/14/08/18/9emunyge.jpg
http://img.tapatalk.com/d/14/08/18/ata5ezy3.jpg
18-08-2014, 10:40 PM
Daniel.29

Quote:

Originally Posted by Honda_FD

Yes you can knock them out an put mesh there. The plastic is held in by 1 screw.

As of the Js air duct. Im not sure

Awesome, I'll look into one and apply the meshing if I can get my hands on one. Do you guys know where I can source a facelift?
18-08-2014, 10:41 PM
Daniel.29

Quote:

Originally Posted by jprak

hello all

yes facelift looks like a fd2R but it isnt.

the airducts of Js racing not sure it'll fit but cant confirm as i havent bought a set.

ive put a Js lip on the facelift bar and it fits with minor mods

http://img.tapatalk.com/d/14/08/18/9emunyge.jpg
http://img.tapatalk.com/d/14/08/18/ata5ezy3.jpg

Looks good, mate. Look forward to seeing it sprayed and installed:)

Where'd you purchase the lip from? and for how much, if you don't mind me asking?
19-08-2014, 02:49 AM
jprak

Quote:

Originally Posted by Daniel.29

Looks good, mate. Look forward to seeing it sprayed and installed:)

Where'd you purchase the lip from? and for how much, if you don't mind me asking?

wont be installing it as i already bought a fd2r replica bumper with carbon js lip and air ducts

hmm lip was on ebay but they dont sell it nomore...
price? forgot, ages ago >.>
19-08-2014, 04:10 PM
Daniel.29

Quote:

Originally Posted by jprak

wont be installing it as i already bought a fd2r replica bumper with carbon js lip and air ducts

hmm lip was on ebay but they dont sell it nomore...
price? forgot, ages ago >.>

Oh, interesting. In that...don't mind if I ask you where you bought your FD2R replica bumper with the J's CF parts for it, and how much for? :)
19-08-2014, 04:15 PM
jprak

Bought the bumper and lip off a member on ozhonda lol
500 each lip and bumper
19-08-2014, 04:33 PM
Daniel.29

Quote:

Originally Posted by jprak

Bought the bumper and lip off a member on ozhonda lol
500 each lip and bumper

Ohh, interesting. Cheers man.
19-08-2014, 04:40 PM
Honda_FD

Quote:

Originally Posted by jprak

Bought the bumper and lip off a member on ozhonda lol
500 each lip and bumper

Are they plastic? $500 isnt bad
19-08-2014, 04:50 PM
jprak

Bumper is 500
500 for carbon lip

It's the one I got
22-08-2014, 07:50 PM
Daniel.29

Has anyone bought from this seller before?

http://www.ebay.com.au/itm/271371281...84.m1423.l2649

And will those J's racing air ducts fit on a replica FD2R bumper?
22-08-2014, 09:47 PM
SharkChu

Quote:

Originally Posted by Daniel.29

Has anyone bought from this seller before?

http://www.ebay.com.au/itm/271371281...84.m1423.l2649

And will those J's racing air ducts fit on a replica FD2R bumper?

I think all their products are Fibreglass, which I don't recommend.

I would avoid.
23-08-2014, 06:59 PM
Daniel.29

Quote:

Originally Posted by SharkChu

I think all their products are Fibreglass, which I don't recommend.

I would avoid.

Oh, I see. I always hear people not being a fan of fibreglass car parts, but why's that?
23-08-2014, 07:06 PM
kikimushroom

Fiberglass is easier to crack as its less flexible, and as you know aftermarket replica parts aren't always 100% perfect fitment. With lips plastic lips you can bend and mold it with a heat gun to fit better whereas fiberglass you cant do that. Also, painted fiberglass parts tend to have a waviness within the paint. Some panel beaters actually go through the effort to get rid of this but most don't bother and just paint the part for you.
23-08-2014, 07:43 PM
Daniel.29

Quote:

Originally Posted by kikimushroom

Fiberglass is easier to crack as its less flexible, and as you know aftermarket replica parts aren't always 100% perfect fitment. With lips plastic lips you can bend and mold it with a heat gun to fit better whereas fiberglass you cant do that. Also, painted fiberglass parts tend to have a waviness within the paint. Some panel beaters actually go through the effort to get rid of this but most don't bother and just paint the part for you.

Ohh, I get it now. Thanks for that.
I had always imagined replica parts would be made to spec, but I guess my lack of experience was wrong.
Alright, well thanks heaps, once again, for the clarification! I'll keep an eye out for plastic parts in that case.
23-08-2014, 09:52 PM
FDYOU2

Quote:

Originally Posted by Daniel.29

Has anyone bought from this seller before?

http://www.ebay.com.au/itm/271371281...84.m1423.l2649

And will those J's racing air ducts fit on a replica FD2R bumper?

Mate has bought from the seller. He was the seller that sold the j's racing parts (discontinued). The lips were pretty good, but cannot vouch for the bumper. J's ducts will fit only on type r bumper maybe even facelift with mods.
25-08-2014, 02:45 PM
Daniel.29

Quote:

Originally Posted by FDYOU2

Mate has bought from the seller. He was the seller that sold the j's racing parts (discontinued). The lips were pretty good, but cannot vouch for the bumper. J's ducts will fit only on type r bumper maybe even facelift with mods.

Were that seller's parts fibreglass? (Just asking to confirm).

Interesting, I think I'll probably won't get the facelift one just to stay on the safe side, and grab a FD2R replica at some stage.