Alcantara Suede Steering Wheel Tutorial

Alright, so there have been numerous tutorials on here that have helped me and saved me a ton of dough. Time to give back.

A bit of a back story first. I do a lot of rock climbing. Nothing is worse than climbing into your car with your red, tender hands and having to handle your hot as hell steering wheel. So I wanted to upgrade my leather cover. Ahhh... To hell with it, I always loved the feel and look of micro suede; my steering wheel looked worse for wear and I just wanted to spoil myself and my car (Tasha. Yeah I named my car, I ain't ashamed).

We will be removing the stock leather "wrap" and replacing it with a band spanking new Alcantara wrap. Now for those of you who do not know what Alcantara is, basically its the micro suede you see in some high end cars like Aston Martins and Ferrari's etc. It's a lot more expensive compared to normal micro suede, but is said to be more harder wearing and much more resistant to sun fade and grime, it also stays (relatively) cool in hot Australian sun. But the main reason I wanted it... Well its because when I grip my steering wheel it feels like this: https://www.youtube.com/watch?v=vI_cy9hK7XI (By the way, I'm talking about the guy with the kittens, not the shitty T-Shirt)

Time
2-3hrs if you took things slow like I did.

What will you need:
The cover Kit (Many options exist, micro suede, leather, leather with pin holes etc etc)
From here: http://www.redlinegoods.com/RSX0205shiftboot.php
Patience - Lots of it!
A sharp blade to cut through the stitching of the leather
Size 30 Torx
14mm Socket with extender.
Thread (Provided with the Kit)
and >BLUNT< needle. (Provided with the Kit)

Optional
Double sided Tape (Preferred by me, less messy and secure)
Glue (I would stay away, but has been successfully implemented)
Stapler
iPhone opening tool/guitar pick to help fold the material
Beer or Wine (Lots of it; this is going to take some time so it really should go in the list of things you need)
Anune T1 with Senheiser HD650 and FLAC Albums of HIStory, Dark Side of the Moon, If you Wait (But I digress)

Motivation
http://www.niko.id.au/integra/13.jpg
Look at it, Look at it, Look at it, Look; at; it... And now Reeeeee'spect it!

Step One: Realise that you do not want to end up with a face full of Nylon while performing this awesome operation. So Disconnect the bloody battery before you proceed, wait a little while. Just in case.

Step Two:
Remove your steering wheel using this guide: http://honda-tech.com/acura-rsx-dc5-...-swap-2484761/

Optional: Realise that your electric drill does not have the necessary torque to undo the stupid screws. You use a bit of Russio-Kiwi-Australian thinking to come up with a Nikotool. Pictured here
http://www.niko.id.au/integra/12.jpg
Yeah, thats right its a Torx in a drill extender in a 1/2" socket in a converter in a socket extender in a ratchet. (From now on I'm assuming that Honda hires the characters from the avengers to tighten the screws in my car. I already stripped 2 of them trying to get to the (still) non functioning lock actuator on my passenger side #firstworldproblems)

Step Three:
Using the knife cut through the stitching carefully.
http://www.niko.id.au/integra/1.jpg
http://www.niko.id.au/integra/2.jpg

Step Four:
Admire your now naked wheel. Don't worry it ain't going to stay like this for long.
http://www.niko.id.au/integra/3.jpg

Step Five:
Take your time, and do this right the first time. Align your cover well. Once aligned you can use the iPhone tool and double sided tape to semi secure the wrap so it doesn't move unless you want to readjust it. The double sided tape is not there to glue the wrap in place. It's only to help you keep it where you want it as you sow the wrap on. It ain't going to move anywhere once you have finished the job, glue or no glue!
http://www.niko.id.au/integra/4.jpg
http://www.niko.id.au/integra/5.jpg
http://www.niko.id.au/integra/6.jpg
http://www.niko.id.au/integra/7.jpg
http://www.niko.id.au/integra/8.jpg
http://www.niko.id.au/integra/9.jpg


Step Six:
Realise that the guy who made Redline's instruction videos is a muppet who can't video for crap and you aint getting those 30 minutes of your life back. (Oh and while we're on topic, If you know that guy please tell him that his lips; my ass; they should meet) Go on to youtube and find the stitching pattern tutorial for you that you can actually follow. I used this one here: https://www.youtube.com/watch?v=n9hNSkl0eKI

Start sowing! I started from the the bottom right and moved my way clockwise. I secured and restarted the thread 3 times in total. Supposedly this is not very good for the same reason Tu144 is a shitty plane. (The panels are too large which once a crack started to develop lead to catastrophic structural failures, while in the Concorde the panels were small which meant if a crack would start it would stop once it reaches the end of the panel) - Basically it means that I would have to resow half of the wheel if a thread would come loose. Its also very difficult trying to keep almost a metre of thread knick and knot free while you're doing the mod. The reason why I went with the 3 massive threads method is neatness. I felt restarting threading would lead to an uneven pattern... Constantly recheck that everything is in alignment as you sow your way around. Thankfully I did numerous times and nothing is worse than having to unthread because you disalligned the wrap.

Step Seven:
Admire http://www.niko.id.au/integra/10.jpg

Step Eight:
Reverse the guide above to reinstall the wheel.

Extra Comments
I'm in no way associated with redline. And if they are reading this thread I would ask them to pay extra attention to the three connection points. There is a little bit of folding around these areas. My stitching seems more than fine to me (I used tweezer for 30 minutes trying to find the right combination of too tight and loose around that area) in the end I stretched the material over and used staples on the inside of the centre of the wheel to keep them in there. The wheel while very good is still not perfect. I will let you judge yourselves.

End Product
http://www.niko.id.au/integra/98.jpg

Thanks peeps.

Niko

Good write up mate.

To me personally that looks tacty/Cheap/Bogan/Groce.

Rather spend that extra on nardi, momo etc etc and keep the stock steering wheel on the side for wen i sell the car.

Also you have posted in wrong section.

props for the hard work, must've put in alot effort to get that close.

Redlinegood's products are top notch. You should email them this guide, in the past I've heard they reward their customers generously.

The guide you've done is awesome as well, good work!

Looks epic! shits all over the pleather and you get to keep your airbags :)

Have you got a pic of the final product? or is it that first pic?

Thanks for the input and the supportive comments. I have posted the picture on the their Bookface see what happens.

Re wrong thread. My bad. Can a mod please move the thread where it should have been? I really enjoy the look and feel; maybe I'm just weird:o. It's unlikely I will resell this car and if I do,I feel its a something that may appeal to some buyers.

The picture up the top is the end product. I will say that it looks a lot better at night with the red glow of the dash.

Oh, and the airbag keeping part; I also want to add that when I reconnected the battery I stood outside when I turned the ignition... Logically nothing should go wrong, but you may not want the front row seats to boom-pow city.

Nice, I was not aware you could DIY this kind go thing.
Anyone know of a kit like this for a DC2R?

Not a bad result but imo it would look better with black cross stitching,the bright red makes it look cheap



also is this for a daily driver? alcantara is not daily friendly with sweaty hands,its for gloved hands

Quote:

---

Originally Posted by StretchGSK

Nice, I was not aware you could DIY this kind go thing.
Anyone know of a kit like this for a DC2R?

---

Please dont rekt type R steering wheel. Its actually worth $$$.

So there were a couple of kinks and uneven stitching that were annoying me so I decided to sit down and fix them and re-did some of the stitching and re-aligned the wrap to be in a better position. I'm really happy with the way it has turned out.

This is a daily car. This is also the reason why I went with Alcatara and not microsuede alternative. With that said I think that in an other 4 years I will have to get an other one as this one will be getting long in the tooth. (220'000kms hoping for somewhere around 350'000-400'000 mark) I would be extremely surprised if the wrap surpasses the remaining lifespan of my car but only time will tell!

While I agree that black stitching would have looked more "in place" I really do love the way my wrap looks and feels. This is not for everyone but the way I see it, I'm driving around with a stupid grin on my face; and in the end that's all that matters. Pictures are bellow.

http://www.niko.id.au/integra/98.jpg
http://www.niko.id.au/integra/99.jpg

I think that's pretty good

I rate it.
Although I personally won't do it, I appreciate the effort and time shown by the OP to contribute to this forum and keep this scene alive.

I reckon it looks great. I've used Redline products and they are very high quality. The only issue I've had with them is that sometimes you have to improvise the fitting a bit.

To balance out the interior, just install a Redline shift boot kit with red stiching. Then if it's available, do your armrest as well, really transforms the whole interior of the car!

Great write up man !

Guys, thank you very much for all the feedback. I really appreciate your opinions and will be happy to provide you with some nice discounts in return in case you want to order anything with us :)

@nikotegra: thank you very much for sharing your experience and for your hins related to what we have toi improve - you're definitely right - our YT videos have to be re-made properly ASAP! The thing is that we are a small company and current work load does not leave us enough time for anything more than customer service...

Anyway - we will surely take care of it no later than the beginning of 2015.

I am happy to know that you are enjoying your ride so much - you did a great installation job - I am always happy to work with customers with so much attention to detail :)

Take care

Jack
RedlineGoods Team