K20 Swap MAD Torque steer pulls (Lane Jumps)

Hi Guys,

I'm having issues with massive torque steer on K20 Swaped EG - 180Kw on wheels
Just bolt on, cams etc.

We have change every possible thing that could be change on the suspension thing

Coilovers
poly urethane bushes Front arm, rear trailing arm etc.

Fronts:
Hard Race Tie Rod (ball joint)
Hard race Camber arm (rubber)
ITR sway bar

Rear:
Hard race Toe adjuster (rubber)
Hard Race Camber arm (rubber)
Hard Race Rear (rubber)
Function 7 Tie brace
ITR Rear sway bar

The car is Track dedicated

Alignment

FRONT
Camber L/R -2.6
Toe L/R 0
Max Caster

Rear
Camer L/R -2
Toe L/R 0

Wheels
Rota Grids 0 Offset front and rear

Tires
R888 225/50/15 Mediums

I've noticed that once we have the R888 the torque steer becomes tremendously crazy compared to our old set of 215/50/15 A050 soft.

The alignment pretty much the same but we have dialled back to 0 toe on front and rear

we did run -0.05 toe on rear and 0 on front before.

Tire Pressure is at 34 psi - warm pressure.

car felt floating on high speed with WOT
wot from 2 to 3 to rev limit it would jerk to LEFT and jumps lane... Caught me off guards a few times.
as I didn't drive the car for awhile since I got the new tires on.

Does any body have the same situation as me? or is it just me?
that I forgot to train my biceps to control the steering wheel?

It's just trying to kill me on WOT VTEC and I didn't remember this happening when I had the A050's on it.

What diff are you running?
The OEM / Torsen / ATB diffs "hunt" for traction at that sort of power.
Swap tyres/wheels with a mate if possible and check again.

Spoon Lsd with 5.1 FD.

Never had much issue with the 215 50 15 A050.

But the 225 50 15 r888 does this crazy pull lol.

Will be trying another set of wheels and see if that's the cause.

r888 vs a050 how is that even a comparison

sounds like a lot to do with the tyre....

Need full slicks

Quote:

---

Originally Posted by carayan

r888 vs a050 how is that even a comparison

sounds like a lot to do with the tyre....

---

Funny you say that
The tyres are not spinning or loosing traction when this happens.

Even at high speed above 100-16₩
the car would crab as well.

A little head fk at the moment figuring out what happened to it from now to before the tire change.

Quote:

---

Originally Posted by 040501912

Funny you say that
The tyres are not spinning or loosing traction when this happens.

Even at high speed above 100-16₩
the car would crab as well.

A little head fk at the moment figuring out what happened to it from now to before the tire change.

---

Were you using the same offset wheels on the old tyres?

Changing the offset will change the scrub radius giving you more/less feel and could change torque steer behaviour.

Could just be the change in tyre compound too or the diff showing up a bias.

Quote:

---

Hard Race Tie Rod (ball joint)

---

This is part of your problem most likely. These hard race tie rods are junk, and will completely screw up your bump steer. See a post from a mate of mine here: http://honda-tech.com/acura-integra-.../#post49927138

A tyre change will tend to change tramlining or bump steer response behaviour, as a different tyre will have different camber thrust and lateral force developed for a given slip angle. I'd try putting your stock tie rod ends back in to start with though.

That's a possible problem.

We did put the hard race front tie rod the same time as the new tires.

Now after that you mention that, I did a quick search on Google, People have notice difference with them.

As I quote " like driving on ice" is the same feels as what I'm having at the moment.

I'll be trying the stock tie rod tonight and see if that is the case.

Will update the issue progress

Problem solved.

Replaced the hard race front tie rod end to stock unit.

BAAM! It's fixed.
Thanks for the input guys!

that tie rod end is definitely junk!!

Which tie rod Inner or Outer?

Outer front

Quote:

---

Originally Posted by 040501912

Problem solved.

Replaced the hard race front tie rod end to stock unit.

BAAM! It's fixed.
Thanks for the input guys!

that tie rod end is definitely junk!!

---

Nice, charheR is one helpful kunt

Dunno how this hardrace shit sells so well, fukin rubish

Quote:

---

Originally Posted by u mad?

Nice, charheR is one helpful kunt

Dunno how this hardrace shit sells so well, fukin rubish

---

JDM tax is strong son.

Quote:

---

Originally Posted by 040501912

Problem solved.

Replaced the hard race front tie rod end to stock unit.

BAAM! It's fixed.
Thanks for the input guys!

that tie rod end is definitely junk!!

---

Good to hear! Those tie rod ends are just designed incorrectly, and the bump steer of a standard double wishbone Honda is pretty good until you start to get a fair way from standard in terms of ride height or adjustable arms.

Theres a tie rod kit here that someone has developed that functions way better than the Hard Race one: http://forum.clubitr.com.au/showthre...nt-s-DC2/page7

Can't see cause I don't have account lol.