Printable View
Attachment 28993hello peeps,i hav 1995 Honda accord exi,after starting car reversed back ther was a large oil puddle.reparkd car switchd off looks to hav come from front of engine about half way down.dont know if hitting huge pot hole 2 days b4 has any bearing on prob,but any help would b grateful ty.
Probably oil cooler gasket
Hi, welcome to Ozhonda. since its in the introduction section.
just say Hi. I didn't even read more than 5 words from your original post btw.
thx u Renzo,hav never used a forum b4,appreciate your time and help
You have to clean the oil leaks from your engine bay, Top the motor oil and trace it back to where its coming from.
A leak that size you should be able to find without adding more oil
Its for protecting his motor.
You don't run a car leaking that mutch oil dude
Im no mechanic,
This is what I do to solve oil leak issues I have had.
If your oil at the top hole of the dipstick, U could have someone start the motor while u had a look outside where its coming from.
Like op mentioned he reversed and reparked the car, aka he even put load the engine... still okay.
Yeah but if it's pissing out there's the chance that some parts arnt being lubricated as well as they should be, more to the point if oil is leaking at that rate, finding the origin of the leak shouldn't be a hard thing to do.
Funny how you got rid of dc5 after your imaginary gearbox removalQuote:
Originally Posted by amant02
Most likely the cam seal
Leak like a sieve all time
thx Jase, I hav looked at some vids on utube and they seem to agree with wat u r saying.its still a big job I think
Nah small job, very easy no worries could be had
Cbauto is proQuote:
Originally Posted by Daveho1
hey ther peeps, just a quik update on my situation.thx 4 any input,turned out to b oil pump seal had popped out.still had to replace timing belt and others,also head gasket.anyway took it for test drive was going fine until D4 indicator started flashing after 10 min driving and then speedo stopped working.had already replaced fuel pump relay,day b4 oil seal popped. well if anyone can give me some advice would appreciate
Pull the D4 code with a paperciip
Scream, shout, oil pump seal pop out