http://img.photobucket.com/albums/v6...c/Rimg0151.jpg...
Printable View
big thumbs up jason , welcome to 12 sec allmotor club!
very fast b series!!!
congrats jase! :D now start reeling in that EG5 ;)
well done!! very very impressive!
wtf. More info plz.
Congrats Jason.
That's.... insane.
plz say it was an integra vtir coz i wonna b cool too :cool:
haha yea i want one :PQuote:
Originally Posted by quangsta
my time wil come....
nice job man :)
man u cant just post like that, u gotta give us some info punk :p
good work mate!
Exellent effort Jas, well done...
Great to see it all coming together at last.
Can't wait to see how it goes at the cuircut... ;)
Cheers
Adrian
Yes A big congrats it is good to see you back out there having a big go.What tyres where you on as the 60' is very good.
Regards Dyno Dave
holly molly!!!
info!!!
M/T slicksQuote:
Originally Posted by DynoDave
22x8x15 ( the one that we used on EGK20A)
its a dc2r with alot of mods ( Allmotor )Quote:
Originally Posted by bennjamin
till running stock throttle body and stock intake manifold.
just remember guys, the car was running -4 degrees camber and heaps of toe for circuit racing, with a proper wheel alignment for drag racing, probably a little more in it.
plus the sussy was setup for circuit which is backwards to drag i beleive.
Ok that is why the 60' is so good with the slicks still a great job Jason and the intake is why MPH is down a bit for that ET.A big :thumbsup: to you and everyone that has helped you get down to these times.
Regards Dyno Dave
good job mate but this only tells me what is stock not what has been modded! :thumbsup:Quote:
Originally Posted by blackdc2
details like mods, kw at the wheels would be helpful ?
is your cars tripped out or full street trim ??
Quote:
Originally Posted by DynoDave
thanks Dave
basically it has pistons, cams, intake, exhaust + all the little bits you need to make it all work together.Quote:
Originally Posted by DMT
I am not going to post power figures cause every dyno is different and should be used as a tuning tool.
Hey - I was there to see both your 13 flat run and then the 12.9 run, very impressed good work! I introduce myself next time..
keep it up dude!
Yep the 400m blacktop dyno says it all.:DQuote:
Originally Posted by blackdc2
Regards Dyno Dave
JUST a Dc2.....and already chasing down a K20 powered lil EG civic !
Amazing....it would be very interesting to compare both - mods vs price vs power etc etc. Altho , i understand this wont happen for now :)
I just think this time is incredible lol....
Great work Jason !
As Dave said, congrats - but not a real surprise, that damn thing is fast.
With a bit more time and a set of slicks...
ANTI CLOCKWISE POWER!!!!!!!!!
And DMT Dave... it has a looong list of mods. You basically need "the works bro". Not cheap, but pays off, as you can see
fair enough still you would have to be making 180 - 200fwkw to run that time and that is huge power for an n/a 1.8ltQuote:
Originally Posted by blackdc2
unless of coarse it its stripped out and weighs under 1000kg then you would need alot less power!
i know you said you dont like figures but my car put our 115 fwkw and weighs around 1400kg with me in it and i only managed a 15.4 @ 150kmh even with better tires and launch id be lucky to do a mid to high 14.
still it a great effort :thumbsup:
when scrutineered the car weighed in at 1050kg plus my 84kg fat arse...Quote:
Originally Posted by DMT
b series wont make anywhere near that power
1134kg and a high 12's needs to be making some decent power!!Quote:
Originally Posted by blackdc2
the slicks must make a big difference cause your 60ft time is awsome for a FWD
If you understand drag racing the MPH normally tells you what power it is making for a car of that weight ET's come from the chassis and tyre setups that each car uses it is that simple.Quote:
Originally Posted by DMT
Regards Dyno Dave
i fully understand that and that is what makes it so impressive!!Quote:
Originally Posted by DynoDave
he did a 12.9 @ 167kmh
in did 15.4 @ 150kmh
you would know that 17kmh doesnt normally = 2.5sec down the 1/4 so his chassis and tire setup were working very well! :thumbsup:
2.5 secs can usually be made up with a really good 60foot time, driver and driving style can make a huge difference..Quote:
Originally Posted by DMT
congrats on the time, it's great to hear more Honda's are getting the ET's down.:thumbsup:
Just curious what was in the other lane that ran 15s..
some skyline GTSTQuote:
Originally Posted by aus91integra
Geez, that's some embarrassed skyline driver
awesome time mate! poor skyline.. hehe..
lol, good work man
nice work! keep it up
always knew the R was a good all round performer :)
awesome run.
I was just gunna say, that skyline must have had bad launch / traction problems, i was thinking maybe a v8, cos look at your MPH reading at the end... it was practically identical, yet you were 3 seconds ahead, couldnt it get traction?
Over the 800m, it probly would have caught up...
Hot time mate, is your car road drivable.. or has it had alot of weight reduction?
So its had some weight reduction right?Quote:
Originally Posted by blackdc2
well seeing as it came from the factory weighing 1080 or something like that, it only had a tiny bit of weight reduction.Quote:
Originally Posted by THRUST
it drives 99% as good as a stock one. that 1% being the clutchQuote:
Originally Posted by 91'lude
Very great time. Hope you can do it better in the future. You are turbo eater.
Congrats. Great times. BTW did you run the car as is with street radials or drag radials beforehand?
22x8x15 m/t slicksQuote:
Originally Posted by G AE82
Great work!Quote:
Originally Posted by baboo
Ive heard alot about this car from Yonas, he was keeping me upto date pretty much in real time as you were doin the run! Nice to see you post up the sucsess.... 3rd fastest NA FWD in Australia i beleive? :rolleyes:
WOW, this slipped under my radar...
AWSUM, kicks the shit out of my old B20 power wise..
Big :thumbsup: actually have two :thumbsup: :thumbsup:
MPH is only 4 behind me and my car was 300kgs lighter :eek:
What rpm did you launch??
Wooo....I wonder when's my turn....hmmm....*Dreaming*...hmmmmm.....12 sec...yumm.....
about 8000Quote:
Originally Posted by edw-R
It would be very interesting to know how fast would it run on street tyres.
what would you say blackdc2? low to mid 13s?
by the way what a great you had.
LOL @ 8000 launch...
and it is amazing how the ET for both cars and MPH is so different... 15 sec pass with a higher MPH than a 12 sec pass... makes u think what needs to be improved...
and a comment earlier about if the run was 800m that the other car would've caught up... i don't think so... well at least i don't anyway... coz blackdc2's car doesn't stop at that MPH either... who knows... maybe he would have a faster MPH at 800m than the other car?
congrats on the time anyway...
fark... 8k launch....
i'll be pinging the redline if i did that lol....
congrats on the time dude!!
excellent time!!
wish i could achieve those times in my car! =)