DIY gear change & speed light for RSM

hi all... was thinking just put 2 led for my RMS... but is gonna be very weird to just have 2 led on the dashboard... so... i bought a little toy car. put the led in as the head & fog light for da toy car...(:D got this idea when i was shopping at coles...:D saw this little nice :honda: civic)


step 1:... drill the holes on da car... i use 3mm led as fog light and 5mm super bright led for the head light. there isnt enough room for the 5mm led... so i have cut the wheel a bit to fit tat..
http://members.iinet.net.au/~tommi/o...IY_RSM/001.jpghttp://members.iinet.net.au/~tommi/o...IY_RSM/002.jpg

step 2: connect the led with the correct resistor on the (+) side of the led then try to fit it on da car
http://members.iinet.net.au/~tommi/o...IY_RSM/003.jpghttp://members.iinet.net.au/~tommi/o...IY_RSM/004.jpg

here is da pic after i put everything in...
i only use one (+) wire for all lights in there...
the other 2 wires is connect to the RSM... they are (-)
http://members.iinet.net.au/~tommi/o...IY_RSM/005.jpghttp://members.iinet.net.au/~tommi/o...IY_RSM/006.jpg

this is the end product... i think it looks ok....
(i will take off the stick tape later... on the side of da car)
http://members.iinet.net.au/~tommi/o...IY_RSM/007.jpghttp://members.iinet.net.au/~tommi/o...IY_RSM/008.jpg
http://members.iinet.net.au/~tommi/o...IY_RSM/009.jpghttp://members.iinet.net.au/~tommi/o...IY_RSM/010.jpg

here is how it look like when is operating
http://members.iinet.net.au/~tommi/o...IY_RSM/011.jpghttp://members.iinet.net.au/~tommi/o...IY_RSM/012.jpg

hahaha very imaginitive and cool :thumbsup:

nice! ehehehe

I like it! Very creative!

looks cool mate, how about your rsm.. u reckon they are worth the dough??

Quote:

---

Originally Posted by FlavzzTEGRA

looks cool mate, how about your rsm.. u reckon they are worth the dough??

---

i think is worth it... since u can take it with u when u change your car.
but as u know it doesnt gain any performance... it only show the details....
u will love your car more after installed it... (at least i do)
i was thinking to put the v-tec controller rather then rsm... but the thing is i have no idea about tuning up.. the only way is dyno->change setting->dyno->change setting... therefore i choose the rsm.

hahahaha very nice.... looks pretty cool :)

very imaginative indeed!!
i rate it :D

hahaha excellent...

haha. nice one. clever

awesome man. i wonder if ideas will pop up in my head next time i visit coles.

Sweet write up!! :thumbup:

How would i connect this to a vafc??

which wires do i have to link the led's to??

look on ur VAFC install guide/ instruction manual..
it MIGHT have it on there.. not 100% sure---
does ur VAFC have rev output? if it does.. u can do it-
but yeh.. take a look in ur instruction manual.. this is how mr learner found it---

just wondering, for the (-) wat wire did u connect that 2 rsm ? is it the white, for negative trigger ?

bump.. i need some help on installing this ?? anyone help

LOL damn this is old thread.. but anyways .. wat help is needed?
the white wire on the RSM is what you want to connect up and also a power source for the light. (pretty sure :D)
anyways.. seriously Look in your instructions from the RSM and it will show you how towards the back i think. It has been a while...

whoa only just noticed this thread now.... velli kewl :D

connect it to the white wire from the RSM for ground (thats the switching ground) and splice into the RSM or the ECU's power

u can really go to any power source... so what ever you can get your wires on. give it a test and see if it works... (set rev @ lowest) rev to that particular point and your light should work :)

just a question, which wires do u connect to the light?