Printable View
Hey all,
recently i replaced the factory steering wheel with a momo one, the boss kit i used wasnt cancelling the indicators afetr id turn, so i though id take a look at it today.
Well today when i removed the nut inside the wheel, the boss kit just wouldnt slide off like it did before. the nut wasnt very tight. no matter how hard i tried the damn thing just wont budge....
Any ideas on what i can do?:( :(
thanx:wave:
Put WD 40 on the spline and bolt the whel back on and start banging the wheel towards you and pulling hard. If that fails then buy a steering wheel puller tool.
Sounds like you need a bit of a spacer for your boss kit, I used a washer, that will fix the indicator problem.
steering wheels are very difficult to take off.. like flipmods said.. u will need either alot of strength or a steering wheel puller, if u decide to just pull at it make sure u leave the bolt on when pulling at it, just have the bolt loosened.. u could hurt yourself otherwise :)
hmm ok,
its just that when i took off the orriginal wheel, it just slid off easy.
Who has a steering wheeler puller thingy and is willing to lend it to a fellow ozhonda member??? :):)
i would suggest putting the wheel back onto the boss kit, and using it as a handle to yank it off...
really ive tried. its so hard... i just dont wanna break n e thing
well, one quick q,
if i pulyy really hard, can i break n e thing?
Not really. Tug away.:D
It’s because the steering wheel bolt is tapered and you over tightened the boss kit on there.
Damn..... n e more ideas on how to get it out???? Tried WD40....
so if i pull REALLY REALLY HARD, i WONT break n e thing? Thats all im worried about
Same thing happennig to me man. if u can solve it. let me know please.
Thank you.
steering wheel puller costs about 27 bucks at super cheap.
its like the grappling hook in those toy machines (the stuffed toys) with a long bolt in the middle.
i had to buy one aswell and i only used it once. it still pisses me off that i had to buy one :o
Hmm, i might buy it and take it back, saying it dont fit my wheel. Or could i "Hire" yours?Quote:
Originally Posted by joyride
its one size fits all.
where abouts are you located? i cant remember if i have it in syd or if i left it in the gong. i'll have to look for it.
im not in a hurry or n e thing, im getting a new wheel, but im using the same boss so it dont need to be removed , BUT i wanted to fix my non self cancelling indicators.
o im in the iner city of syd.... 5 min from syd uni.
i am going to paintball
i found it!
i live in fairfield but work in surry hills (cnr elizabeth st and wentworth ave). if u want to use it pm me.
get a steering wheel puller at Kmart, use it and return it lol.
not sure if they still have it at Kmart anymore
hahah keep us updated if u break anything or not lol
had the same problem with my mates car. what we did was put the steering wheel back on but loosen the middle nut so when you pull the steering wheel doesnt fly in your face. After that took 2 guys to pull the steering wheel off. it was a struggle but
2guys lol, just hope it doesn't break anything.Quote:
Originally Posted by -MuGen PoWer-