Anyone know where to get and install AUX input cable in Jazz? or maybe the cable is available outside AU like HK? Wanna use my mp3 player to play music :cool:
Printable View
Anyone know where to get and install AUX input cable in Jazz? or maybe the cable is available outside AU like HK? Wanna use my mp3 player to play music :cool:
the only way.... honda japan
i am thinking of connecting my ipod to the AUX as well.
what kind of plug does the Jazz have for the CD Stacker? If its the same as the Euro, you might be able to use a SNHOND3 http://www.ozhonda.com/forum/showthread.php?t=20825
They sell lots of similar types of adaptors in the US. we just need to find out if the Jazz plug is the same as any other Honda and just buy that plug
Was thinking to contact Honda Japan but I couldn't find a customer service email address at its website...
if someone know Japanese please do me a favour...Thanks!
i have just emailed Soundgate and hope they can provide some info on this. i know there is no jazz/fit in the states but just see what the reply is. i mean there is no harm trying
personally, i reckon the headunit will be using the same kind of plug. as can be seen from the file as follows, SNHOND3 is applicable to most honda models. http://www.soundgate.com/upload/prod...ments/0188.pdf
i hope this can bring good news. i am using itrip now and the sound quality is just not there, but still acceptable to me. of course if there is a better option, i'll go for it.
change the JDM double din wont b4 a lot easier if u really after mp3
Quote:
Originally Posted by loo
Quote:
Originally Posted by OptionEngineering
I kinda like the 04' jazz integrated head unit. A aftermarket mp3 player usually looks crap and tachy and cheap... unless you buy something expensive - like a $500+ mp3 head unit.
i am begining to like the original panel and that is why i am exploring other options instead of changing to a jdm double din panel.
besides, i already have the ipod and therefore it will be good if i can connect it to the headunit and play mp3s. really hope the soundgate adaptor can do the job!
the older design looks better than the new one
wanna swap asiansquad??
i have taken the hu off and have a look inside just now. i found that we can actually diy the aux input and its actually quite simple. i am going to source for the parts and make 1 tomorrow. the entire job will cost less than $15 or $20. i am trying to get this done below $10. but taking the hu out was a big task and my fingers are hurting now! :(
i shall write a more detail post with pictures and all the things that are required once i get my ipod connected. hopefully i can get everything working by tomorrow evening. :D
Way to go Ja22!!! :)
Quote:
Originally Posted by JA22
:thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup:
Good on you mate...!!!!
but you need to teach me how to upload pictures again! :DQuote:
Originally Posted by ahcash
i tried your method and still cant get the pictures up there :(
maybe i'll email u the pictures and you can upload for me :)
No Problem... Email me.. I have PM you my email address.. :thumbsup:
That's very good news :thumbsup:
But why no AUX in from factory if it's so simple to do so :confused:
beats me :confused:
pm received and pm sent as wellQuote:
Originally Posted by ahcash
i'll try to send you the pictures tomorrow night or on friday, depending on when i can get it working.
thks for helping :)
can u send me the pics? Hahahah
I wanna see
I wanna do it too
no problem kusoQuote:
Originally Posted by kuso
i can send the pics to you as well
you guys can see the actual thing when we meet up after your exams! good luck!
p.s: i cant get into brisbane fitta'er club. something wrong with it at the moment?
yea down for some reason... dont know why... send me by email ^^
emailed pm'ed to you
you didn't email them to me *sob sob*
sorry the pictures are not ready yet. :DQuote:
Originally Posted by kuso
i will email you by tonight or tomorrow. :)
i have got my ipod connected to aux finally! sorting out the pictures now and will post a detail write up as soon as i can.
i am a happy man! hehe
nice nice >< can't wait to see your pics
What a great job you've done JA22!!
nice, waiting for pics to see. how much did it ended up? tu bux? tlee bux? hehe
Quote:
Originally Posted by spoon fit
the parts only cost me less than $8. i do not need to purchase the rca cables which cost $14 at dick smiths as i got them from a friend for free. so in total if inclusive of the rca cables, it would cost about $22 for this diy.
Quote:
Originally Posted by JA22
pic? :wave:
i'll try to post the detail write up with pics by tomorrow :)
http://img118.echo.cx/img118/3408/re...ipod0ht.th.jpg
My IPOD is ready man... where are the pictures... :D :D
hahahahaQuote:
Originally Posted by ahcash
is this special kind os RCA cable??? they are so cheap at JB. $5 for 5 metres.Quote:
Originally Posted by JA22
its jus a normal rca to 3.5mm stereo cable. you should be able to get it cheaper elsewhere but dick smith was nearest to me last night :DQuote:
Originally Posted by Philip Lee
Good write up... :thumbsup: :thumbsup: :thumbsup:
too long~~
sorry mateQuote:
Originally Posted by spoon fit
i was just trying to feed as much info as i can
is ok :thumbsup: :DQuote:
Originally Posted by JA22
nice write up!. thanks for sharing, too bad idont like iPOTs.
same as me ;)Quote:
Originally Posted by Dreams
have u guys fixed the problem yet? if not, check them out
http://www.pie.net/
great writeup......... I don't think I will attempt it myself...... :(
the worst part of the DIY is getting the HU off. it's such a p-in-b...
don't read it then....Quote:
Originally Posted by spoon fit
y feel sorry?? it's not as if u're obliged to share your knowledge. ;)Quote:
Originally Posted by JA22
yeah, such a real pain!Quote:
Originally Posted by Philip Lee
i like your idea of removing most of the catches and just leave a couple of them back in the hu. i'll do the same if i remove the hu again :D
:D :D :DQuote:
Originally Posted by spoon fit
http://a0.cpimg.com/image/38/6D/4893...-028001E0-.jpg
it's not a really good idea actually. there is now a little gab at the bottom of the hu but it's not too visible. can be fixed if i re-do those 2 bolts but i couldn't be bothered at this stage. when it rattles, i'll fix it. :cool:Quote:
Originally Posted by JA22
Quote:
Originally Posted by Philip Lee
:thumbdwn: :rolleyes:
Quote:
Originally Posted by Fit1500_GD3
show us ur one...Fit1500_GD3
if u can't appreciate other people's time & effort, you should expect replies like that!!!Quote:
Originally Posted by spoon fit
"too long" as a reply on its own is too rude & shows that you lack character and immature. JA22 gave up his time to share his experience and all you can offer is crap like this???? :thumbdwn: :thumbdwn: :thumbdwn: :thumbdwn: :thumbdwn: :thumbdwn:
it's very simple. if you think it's too long, just don't read it!!!! and keep such smart-axx comments to yourself cos we don't want to know.
ps. to others, sorry for the OT.
thks for supporting me philip
my very intention of sharing this diy seems to have attract some negative feedbacks and i didn't know that this post can cause some stir here. either my diy is totally useless or the guys in this forum are simply too good.
anyway i have deleted my diy post to prevent anymore unhappy posts. i didn't know that sharing in this club can be that difficult. now that i know for myself......
philip, thanks again for standing up for me. :) :thumbsup:
I am pretty sure spoonie doesn't mean it... :thumbsup: No hard feeling Ja22..
hey ahcash
no problem. as i mentioned to you over our msn chat, i really didn't put this matter to heart. i just don't want to see any more unhappy posts and philip getting caught into something out of nothing. :)
I am sorry, but I can't find the write up.. :confused:
my fault, JA22 deletedQuote:
Originally Posted by tonmasi
Quote:
Originally Posted by loo
Check this out:
http://reviews.cnet.com/4520-10895_7...ml?tag=archive
you still need an AUX Input for that.Quote:
Originally Posted by kimo
JA22 can you repost it please? Its certainly helpful info for all Jazz users out there.
Please!!
Quote:
Originally Posted by bigdongers
Check below...
yeah, please visit BNE Fitta'er Club for the diy write up.
thnx cashie!!! :D:D:D:D:D:D:D
OK.. I withdraw my post.Quote:
Originally Posted by kuso
Hi everyone,
http://fittaer.spydar.com was down for couple of days, does any one can pm me the write up or step by step photos?
Thx and appreciate
hi all!
fittaer was still down so i can't find the article either
would anyone else have another copy by chance?
i think the only thing you can do now is wait for it to come back up. fittaer is down due to server problems... and hopefully that will be sorted out sometime soon.
thanks kuso and ja22!
I still don't undertsand how to fit I-pod in ur HU. What is need.
I found those products:
http://www.soundgate.com/index.php?r...categoryid=18&
http://store.yahoo.com/logjam/piehon03pcpod.html
http://www.pie.net/applepie.cfm
So which one I use, or is there other way.
Please help me
there's another way
check out the fittaer singapore forum
Quote:
Originally Posted by 606cat
The site is down
the info is back up at the Fitta'er Australia site:
http://ausfit.proboards37.com/index....ead=1122253145
Jst wanna know what type of RCA cables are used?
when i sut out my RCA cables they have like 2 wires wraped around one another. (1 wire wraped around the other )
now im confused,, help please
try asking in here.. http://ausfit.proboards37.com
Some of the guys who already done this can help you out there...