Printable View
I have a D16 that i want to turbo, and Im wanting to know if n e 1 on this forum can make a custom exhaust manifold. I'm trying to do it on a budget, so the manifold design is very simple to do. I just wanna see if it'll be cheaper to get one made up from someone on this forum instead of going to an exhaust shop. Thanks
just buy one from honda-tech or ebay. a simple log runs ~100 +ship. i bought my manifold and wastegate from oversea's, much cheaper then local.
where did you get yours from weq???
i'm thinking about doing the same to my 2000 model ek D16 what power are you putting out on your car with what turbo??
cheers,
LowEk
sorry also was going to say what do you think about kits e.g. greddy,apc if i buy a kit its proven power with there dyno sheets but can work out expensive depends on what kit i buy??
cheers,
LowEk
i believed weq got his items from d-series.org, honda-tech.com and ebay
parts are much cheaper in usa cos honda is the back bone of the import scene over there
yer what do you think of the turbo kits you can get here thou??
cheers,
LowEk
its about the same. you can import the greddy turbo kit for you car from the states and itll still be cheaper. just ask weq
no dont ask me. diy
Or just search here and OCAU ;)Quote:
Originally Posted by Weq
try ebay... type honda turbo and you should get a heap of manifolds come uo for your car!
yeah i reckon you're better of buying one or at least take it to an exhaust shop, maybe they can do it and at least it make it look professionally done instead of cheap looking welds. lol
unfortunately, 99% of them will be obx/ssautochrome/stone mountain/xs power(different names, same pile of ****). Don't be tempted by their pretty looks and low price, they are absolute crap.Quote:
Originally Posted by mini_s2000
usually with manifolds and things of that nature you get what you pay for.
there are no big name companies in australia for this sort of thing really especially for honda's. the majority of kits you can buy here will be imported and marked up heavily.
if you dont want to import prepare to either have alot of hassels with a cheap crappy australian mass produce item or pay the dollars and get a custom job done.
if you are going to buy an import item, try and go direct to cut out the middle man and save yourself heaps of cash
I had this manifold custom made for me by a guy in Canada if you're willing to go oversees. Cost was a bit under US$500
http://www.glausers.com/matt/newturbo/newmanifold.jpg
http://www.glausers.com/matt/newturb...ifoldright.jpg
http://www.glausers.com/matt/newturb...ifoldtable.jpg
http://www.glausers.com/matt/newturb...anifoldtop.jpg
http://www.glausers.com/matt/newturb...nifoldweld.jpg
I can provide his contact info if you're interested
why are they absolute ****?
i have an email addy of a guy in sydney who can get them in $299 plus $20 shipping anywhere in Oz.
<LI>ALL mandrel bent tubing. The inlet and outlet are ported and smoothed for the best possible flow.<LI><LI>Thickness 2.5mm & Piping ID 45mmSuit all internal wastegate T25/T28 turbochargers<LI>35 or 38mm external wastegate required
http://i8.ebayimg.com/04/i/04/51/6a/47_1_b.JPG
http://i13.ebayimg.com/04/i/04/4a/b7/52_1.JPG
http://i21.ebayimg.com/04/i/04/4a/09/89_1.JPG
that doesnt make sense mick, you either have an external gate or internal gate. it cant suit all t25/28 internal gates then say it requires either a 35 or 38mm external gate:rolleyes: .Quote:
Originally Posted by Mr. Focus
anyway looking at the pics it's suited for an external gate;) .
that is an ssautochrome manifold... badged however it may be(generally either ssac, obx, xspower, or stone mountain racing, although as seen in qballs thread, it seems some people in aus land are trying to pass them off as their own), it's an absolute piece of shit and a complete waste of money
hahahaha good point richo...i didnt think of that hey. although you can get a plate to cover it
Consider the HKS cast iron maifolds. You should be able to obtain one for ~$250 USD.
They are no longer listed on HKS website, but they are still available.
They don't flow the best, but the price is right, and they are relatively strong.
you can find tons of logs and semi-tubular manifold in the states for around that price that will flow a lot better and offer a lot more choices as far as turbo selection goesQuote:
Originally Posted by joonix
ramhorn style yo!
Mick, isnt there a melbourne guy that is doing an awesome blinging manifold for ya? ;)Quote:
Originally Posted by MR-VTEC
btw mate left u a msg on ur phone, get back to me pronto kneegrow!
yer....any idea off where to get good quality manifolds for good prices in melb...?
i called avo....there selling for $680...cast iron....
or you can email LSD and get a pretty good one for $450 made of stainless steel