[Melb] Need Info on Integra front panels

Printable View

12-10-2005, 07:37 PM
danni_d

[Melb] Need Info on Integra front panels

hi.. i was wondering about.. if u change the front panels of a 93 integra vti-r to the JDM front panels... would it be a straight fit.. or would it cost much more for fitting it on.?
12-10-2005, 07:40 PM
Spunkymonkey

Quote:

Originally Posted by danni_d

hi.. i was wondering about.. if u change the front panels of a 93 integra vti-r to the JDM front panels... would it be a straight fit.. or would it cost much more for fitting it on.?

as in front bar/headlights?

no....different headlights totally....you'd have to find out how much conversion costs.
12-10-2005, 07:41 PM
tRipitaka

u'll need, fenders, radiator support, bonnet headlights and front bar..
you need to snap off the existing support and weld on the new one.. then it's pretty much bolt on from there..
12-10-2005, 07:42 PM
kenshin

you'll need the radiator mount to be welded on...

i've heard of people who have modded the jdm kit to fit in usd/ausdm tegs but havent actually seen any pics or a guide...
12-10-2005, 07:44 PM
vteccoupe

Quote:

Originally Posted by danni_d

hi.. i was wondering about.. if u change the front panels of a 93 integra vti-r to the JDM front panels... would it be a straight fit.. or would it cost much more for fitting it on.?

u need to basically change the whole of the vtir front exterior...frm the bonnet to the side front panels to the headlight to the front bumper..
for the full exterior jdm conversion shld b around 2k nt including labour
12-10-2005, 07:48 PM
danni_d

Quote:

Originally Posted by vteccoupe

u need to basically change the whole of the vtir front exterior...frm the bonnet to the side front panels to the headlight to the front bumper..
for the full exterior jdm conversion shld b around 2k nt including labour

yes i know that i have to get the side panels, front bar and headlights.. but like i'm just saying if it would be a straight fit?
12-10-2005, 07:49 PM
tRipitaka

Quote:

Originally Posted by tRipitaka

you need to snap off the existing support and weld on the new one.. then it's pretty much bolt on from there..
12-10-2005, 07:49 PM
danni_d

thanks dude :)
12-10-2005, 07:55 PM
DC5R8

cost about 100 bucks
12-10-2005, 09:28 PM
quangsta

Quote:

Originally Posted by DC5R8

cost about 100 bucks

wtf??....100 bux???...prolli only get the radiator support and labour to weld it on...

sighz...better not b a post count thingy....
12-10-2005, 09:58 PM
danni_d

haha.. he was talking about the radiator support and the labour anyway.. not the whole front jdm panels fitted on as well.
13-10-2005, 04:13 AM
eG_YoDa

i have in my possession a pair of front JDM teg fenders
not in all the best condition i must say ( needs to be fixed BADDDDD )
willing to let em go for bugger all if ur interested
pm me
14-10-2005, 08:30 AM
LO_N_SXC

All of the mentioned above ^^^ and just check out this Link for more info, PLYBOY has just finished his, looks awsome you should PM him and ask what you want to know regards the convertion.
14-10-2005, 12:37 PM
ErazeR

radiator support bonet ?
14-10-2005, 12:50 PM
evilsub

haha danni. this is vu from dt panels

ive already told you the panels would fit =P

but you need all the parts from the front a jdm dc2

headlight, bumper, guards, bonnet, rad support

pick the radiator support off the aus dc2, weld the jdm one on, and all the rest of the panels are just bolt on. get it painted, and you'll have a hot dc2 =)