Spoon chipped p08 ecu or VAFC

mods are intake and headers...

not sure which one to get for my d15b...

what are the pros and cons of each..

i can get the chipped ecu for around 160

not sure on the VAFC prices yet

AFAIK there is no such thing as a "spoon chipped" ECU...only stand-alone units for B series motors etc.

Id be looking at some piggy back management since you are running stock cam and head etc too ?

i'm referring to my d series motor

and i'm referring to this

http://cgi.ebay.com/ebaymotors/SPOON...83624306QQrdZ1

not exactly that, thats an example

Quote:

---

Originally Posted by krasyvy

not exactly that, thats an example

---

That is NOT a "Spoon" chipped ECU/chip. IT is some aftermarket chip with a fake spoon sticker on it. No doubt , IMO it is some cheap chip which requires soldering to an existing ECU - and modifies / screws fuel maps and ignition iming etc. Please dont get it !

Didn't realise the ones on ebay were all fake.

Ok well should I get a chipped ecu or VAFC.

Quote:

---

Originally Posted by krasyvy

Didn't realise the ones on ebay were all fake.

Ok well should I get a chipped ecu or VAFC.

---

There are other solutions around for your ECU it can be setup to run Hondata S100,Please PM a Hondata dealer for details and prices.
Regards Dyno Dave

Yeah hondata may be out of my price range at the moment.

I spoke to a guy who chips ecu's and he said that he can provide me with some preprogrammed chips, and then alter my ecu so that i can swap chips easily

also for reference.. here is a spoon ecu
http://cgi.ebay.com.au/SPOON-Integra...QQcmdZViewItem


i guess a general rule is that u cant get any spoon product for 15 bucks

Quote:

---

Originally Posted by krasyvy

Yeah hondata may be out of my price range at the moment.

I spoke to a guy who chips ecu's and he said that he can provide me with some preprogrammed chips, and then alter my ecu so that i can swap chips easily

---

Yes

I can do this also.

And I have all the Spoon and other programs which I can provide.

Quote:

---

Originally Posted by Dxs

also for reference.. here is a spoon ecu
http://cgi.ebay.com.au/SPOON-Integra...QQcmdZViewItem


i guess a general rule is that u cant get any spoon product for 15 bucks

---

hard to tell, but that doesnt look genuine to me

Quote:

---

Originally Posted by ProECU

Yes

I can do this also.

And I have all the Spoon and other programs which I can provide.

---

i'm assuming this is a genuine chip?

the guy claims it is genuine...how can i verify this?

you cant verify, unless you do your own reverse engineering of a genuine spoon ecu.

Yes, mine are genuine.

- but we cant verify that either can we?

not having a go at you

just want to know what the difference between a spoon ecu and other aftermartket ecu's would be like?

no, you cant verify it, but they are probably genuine copies of the program.

as far as i know, it is easy to program chips with genuine programs, all you need is the source code, then use a chip burner to make lots of 'genuine' copies...

micheal - you asked me about chipping, but ProECU is the man to talk to ;)

Quote:

---

Originally Posted by michael_antoi

- but we cant verify that either can we?

not having a go at you

just want to know what the difference between a spoon ecu and other aftermartket ecu's would be like?

---

Correct.

As I said before, you can't easily verify its authenticity, unless you can reverse engineer a genuine item.

i dont know a lot about chipping/ecu's

but couldn't u just compare the fuel maps, ignition timing that set on the spoon chip?

Quote:

---

Originally Posted by tinkerbell

micheal - you asked me about chipping, but ProECU is the man to talk to ;)

---

So Evan is a good chipper :p
ALLMTR996

soo, which would be the better option?