Printable View
Just got a question, everytime when i turn left to a road(it's not sharp corner) i accelerated to 4000 rpm, before it approached to maybe 4000rpm, i felt car shake one or twice(sort of like lose control, but it is not that serious) after a few second ,everything went back to fine, only turn left, the shaky feeling is similar to the one when i try to take off quick on a sort of silppery road, cos i currently have 14" mags. can anybody please tell what cause that. Thanks you
your right foot.... or crap tyres
maybe check all ur suspension joints? turning left, and at certain stress level it might be the reason? sorry i cant give u anything definitive though. but hope that helps.
$14 pedders shock test
and try wider\better tyres
my 2c
crap wheel alignment and crap tyres? :confused:
Do you mean the front tyres bounce quickly? Could be axle tramp due to wheelspin, solution = ease off the right pedalQuote:
Originally Posted by sydteg21
Need more info, what gear/speed, is it from take-off?
if your bagging it up you should notice the rpm's lift a bit quicker than normal then suddenly drop when you get traction. less so if your tyres are rooted
i think you just have a heavy foot!!! i feel that on my car too but when slow down its ok...its only happen first gear though.... i take corners at 5000 rpm on my itr and nothing happens, but if i take the same corner same rpm on fisrt gear it happens.....
sounds like a worn shocker or your left hand CV.
Let the mechanical check it
if the cv was worn,it would click or loose drive altogether
my cv was having some virbration before as the inner join was worn.
no click and looks fine. Had it replace with a new one and never had the problem again.
probably just the fact that its an FF, with the 70-30 power distribution. That would be a reason why its left turns and not right turns.
If by 70-30 you mean 50-50, and by "that would be the reason" you mean "i can't explain the reason" then I'll agree with you.Quote:
Originally Posted by integral90
How you figure that the stock diff on a non-lsd teg can give a non-50-50 power distribution escapes me completly.
... its not nessecary to be an assholes, you know that right? I just thought it was 70-30... jesus christ
Well you should have said that you "thought" it, instead of giving it in a matter of fact tone. That way, you won't be spreading miss-information around...Quote:
Originally Posted by integral90
ok, i thought what i was saying was true, why would i purposely try and spread wrong information?