Hey guys what would be the best upgraded injectors to get for my mates civic if he is going to turbo it, the engine is a D16Y4, and where would he get them from.
Thanx.
Printable View
Hey guys what would be the best upgraded injectors to get for my mates civic if he is going to turbo it, the engine is a D16Y4, and where would he get them from.
Thanx.
have a look at this
http://www.rceng.com/technical.htm
depend what setup his going how big a turbo ect
he will have to upgrade them
i'm running 500cc MSD in my B20 N/A
DR1600 - depends how much poower the guy wants to make...
SKREMN - those injectors are wayyyyy to big, are you runing less than 30psi fuel pressure or what?
why are those injectors "wayyyyy" to big? please elaborate.
i am running stock fuel pump and and 38 psi
the pump is holding up fine and holding a good air/fuel ratio
what are you tuning with? can it tell you the duty cycle?Quote:
Originally Posted by SKREMN
DR1600's mates turbo is a t3 with enlarged exhaust housing
they may not be "wwwayyyy" too big, but they're probably quite a bit larger than needed
Just using hondata s100Quote:
Originally Posted by tinkerbell
bloody datto drivers! lol
hey man i highly recomend the rc440 or550 depending on the rest of his set up.
as jimmeh said go to http://www.rceng.com/.
im pretty sure he can supply you with them too.
james
p.s datto's are made of sheet metal! lol
lol be careful what you say cause you won't be laughin when i'm looking at you in my rear vision mirror hehe honda boy :DQuote:
Originally Posted by superR
P.S. thanx for the info.
thats what my cousin said!
no worries man
good luck
I'm about to upgrade from 550s to 750s so my RC Eng 550s with be for sale.
I should have my 750s by the weekend so my 550s will be available next week. $450??
i'll see, don't know if he is too keen on spending that much but i'll let you know, let me know when your ready to sell
Cool. I have no idea what injectors cost here. These are $USD95 each plus about $USD32 for the connectors.
There are some stock S2000 injectors in the For Sale section. They are 360cc. You could use them with a rising rate regulator for mild boost but this is not the best solution.
Oh, and I have a Vortech FMU (rising rate regulator) for sale too.
450 is a good price on RC550's from what I can see..Quote:
Originally Posted by DR1600
They cost about 550 brand new from USA, and then you gotta pay freight, insurance, etc.
I'll let you know what my 750s cost landed when they get here. They are only $3 more than the 550s so it should be a good indication of the price.
Not looking ot make a profit, just help pay for my new ones.
OK. Cuz I'm in the market for injectors at some stage too.
First in, best dressed! ;)
I was hoping to have the 750s this week but it's not looking good so far. So next weekend will be the swap over.
Got my 750s so my 550s will be available on the weekend.
dude how much do you want for the rise rate fuel regulator
$100?
where are you located cause if my mate wants too we might come buy it tonight.
Hey that's cool. I'll be working in the garage so I can pull the injectors tonight.
I'm in Mosman on the North Shore. If you're coming I'll PM you my address.
guys the Vr4 or EVO 1-3 510cc injectors are perfect for the bseries turbo build... if anyone needs some i can get them no probs just pm me
Ahh, you ment the FPR. No problem. It's here on a shelf gathering dust. I could use some pocket money.Quote:
Originally Posted by DR1600
It's waiting for ya!
http://s2000.byteserve.com.au/images/fmu.jpg
And here's the injectors:
http://s2000.byteserve.com.au/images/550injectors.jpg
yeah man found out yeaterday that the guy doin the turbo conversion is supplying everything for him so the interest is lost, thanx anyway mate
No problem. Perhaps yourfather is interested. ;)
what the **** ****
The other user who posted interest is 'yourfather'.
And no, he's not asking you to come over to the dark side.
i was only playin