Printable View
Here's a one for the stickys i think. Its the regulations for certain modification and legals on motor vehicle mods.
http://www.rta.nsw.gov.au/registrati...i/vsi_dl1.html
P.S i've only done the NSW ones cos i knew they were there. I'm sure they are available in other states.
So people asking about legality of wheels, engine mods etc... have a look at this link! (again this one was for NSW people, i'm biased :D )
woot woot.. nice find 1+ rep for u
the NSW "Light Vehicle Modification Guidelines" (VSI06) here:
http://www.rta.nsw.gov.au/registrati.../vsi/vsi06.pdf
and the similar Victorian "Guide to Modifications of Motor Vehicles" (VSI08) here:
http://www.vicroads.vic.gov.au/vrpdf/rdsafe/VSI%208.pdf
are both old State based rules that about to be (or have already been) supersceded by the National Code of Practice...
http://www.dotars.gov.au/transport/s.../vsb_ncop.aspx
but still EVERYTHING must comply with the ADR's:Quote:
The National Code of Practice for Light Vehicle Construction and Modification (NCOP) has been prepared by members of the Australian Motor Vehicle Certification Board Working Party in consultation with industry, user groups, government agencies and individuals with an interest in light vehicle construction and modification.
It is important to note that the NCOP is a "live" document and will be updated by the Working Party as required.
Please be aware that the NCOP only represents the technical requirements that must be met - administrative requirements are dealt with separately by each state and territory's administrative guidelines or business rules.
http://www.dotars.gov.au/roads/motor/design/index.aspx
summarised nicely here:
http://www.vicroads.vic.gov.au/vrpdf...e/VSI%2022.pdf
now this REALLY might be one for the stickies...
useful only if they bother to search before posting :eek:
surprisingly, the one for victoria, it doesn't state any legal limit for the volume of exhaust systems..
ADR 28 covers noise, it has never been state based:
Quote:
The function of this ADR is to define limits on external noise generated by motor vehicles in order to limit the contribution of motor traffic to community noise
Nice work tink.
Anyone got a full copy of the ADR's they can link or post up specific parts of?
no, they are *kinda* only available via purchase from DOTARS...
i have the 2003 set on CD...
Nice work Tinks and Limbo. I've added a link in the sticky.
BTW... noise is regulated by EPA, I'll post the link to the PDF.
Generally it is 90 decibiles
http://www.environment.nsw.gov.au/re...icle_noise.pdf
http://www.environment.nsw.gov.au/air/mve.htm
Copy of the ADR short links, you can order a CD for the full ADRs for a cost of course (Govt ain't giving away freebies)
http://www.dotars.gov.au/roads/motor/design/index.aspx
P.S Tink - that first post that you stated only refers to the ADRs it does not supercede the State rules. It only adds the ADRs to them.
Quote:
Originally Posted by tinkerbell
not sure i follow :confused:Quote:
Originally Posted by Limbo
Ah well those rules that you said superceed the State rules are just pointing out the ADRs. They've always been around, and the state rules point out when there is an ADR present and overridding. So the rules are still current just need to check on ADRs where the state rules point out. i.e noise
ALL rules are based on ADR's
http://www.dotars.gov.au/transport/s.../vsb_ncop.aspx
this link shows you what now "superceeds the state rules"
it is called the National Code of Practice.
this is the contrents of the NCOP:
NCOP1 Preface 3 Feb 2006
NCOP2 Intro 3 Feb 2006
NCOP3 Section LA Engines 3 Feb 2006
NCOP4 Section LB Transmissions 3 Feb 2006
NCOP5 Section LG Brakes 3 Feb 2006
NCOP6 Section LH Body Modifications 3 Feb 2006
NCOP7 Section LK Seating and Occy Protection 3 Feb 2006
NCOP8 Section LL Motorcycles 3 Feb 2006
NCOP9 Section LM Fuel Systems 3 Feb 2006
NCOP10 Section LO ADRS ICVs 3 Feb 2006
NCOP10A LO1-3 ICV checklist 3 Feb 2006
NCOP10B LO1-4 ICV checklist 27 Jan 2006
NCOP10C LO7 ICV Motorcycle Checklist 27 Jan 2006
NCOP11 Section LS Suspension and steering 3 Feb 2006
NCOP12 Section LT Test Procedures 3 Feb 2006
NCOP13 Section LV Alternative Power 3 Feb 2006
NCOP14 Guidelines Electric Drive 3 Feb 2006
NCOP15 Trike Guidelines 3 Feb 2006
NCOP15A LEM Trike checklist 27 Jan 2006
NCOP15B LEP Trike checklist 27 Jan 2006
this is an example of the new "checklist" style of authorisation for modifications,
this one is taken from the "engine" section:
http://home.exetel.com.au/tinkerbell...ormexample.jpg
Seems pretty similar to the sate ones, but i guess Govt trying to get their act together. Now they just need to get the licensing tests/demerits standardised.
Have you seen anything on exhaust noise cos i only had that one from EPA. Is there anything new on that one?
limbo - have you been looking in the links i posted, or not?Quote:
Originally Posted by Limbo
you will find noise testing is in:
http://www.dotars.gov.au/transport/s...s_3Feb2006.pdf
see pages 23 and 24 in particular :thumbsup:
it references the publication "National Stationery Exhaust Noise Test Procedures for In-service Motor Vehicles"
which is a NTC document available here:
http://www.ntc.gov.au/filemedia/Repo...ustNoiseTe.doc
i trust that thsi is what you were looking for :cool:
Thanks for that i can't seem to find what the max noise level is though?
oh, sorry!
assuming you are a petrol passenger car, it is 90dB stationary and 77dB in motion...
http://home.exetel.com.au/tinkerbell...imitsADR28.jpg
Tink - where's that last info coming from can you please gime the link for the entire doc? thanks
I think she's sourcing it from her CD.
in which case, we all should buy one.
I think she is a he :)Quote:
Originally Posted by Bayani
Quote:
Originally Posted by Limbo
http://www.dotars.gov.au/roads/motor...criptions.aspxQuote:
The Australian Design Rules are available on CD-ROM. They can be obtained by emailing standards@dotars.gov.au or by following the steps outlined in the subscription/purchase information page.
pretty pricy, but i bought it as i needed it to put the B16A in my 83 Prelude and the engineer was very strict, so i wanted to know the details of every ADR he was going to be assessing...Quote:
The cost for the ADR CD-ROM (2nd & 3rd edition) is $70.60 ($6.42 GST included) for the initial purchase and includes postage and the first year's subscription to an amendment service.
maybe PM me if you want?
Oh, didn't know wth the name Tinkerbell..
tink, i may send you a pm about it in the future ^_^