JDM ITR 4-1 headers install issue

Printable View

09-07-2006, 12:21 PM
BlitZ

JDM ITR 4-1 headers install issue

I am having an issue wiht my JDM 4-1 ITR headers..

My std EK (im sure teg have the same issue) exhuast hanger before the cat doesnt bolt up what do use instead?

thanks ppl:thumbsup:
10-07-2006, 12:55 AM
BlitZ

asomeone must know
10-07-2006, 01:51 AM
[[d a n n y]]

what about the cat.
u using your stock cat?
10-07-2006, 09:37 AM
BlitZ

Quote:

Originally Posted by [[d a n n y]]

what about the cat.
u using your stock cat?

the cats fine.. i some custom work to get that fitted
10-07-2006, 09:44 AM
barefootbonzai

Just let it hang bro, it's not that important.
10-07-2006, 10:23 AM
BlitZ

Quote:

Originally Posted by barefootbonzai

Just let it hang bro, it's not that important.

dont want to crack the headers..
Ive already cracked 1 set..

are u running a flexi or the oem spring bs..

I reverted mine back to the spring bs and am afriad of cracking the headers.
10-07-2006, 10:23 AM
Limbo

I took that piece off. The exhaust is strong enough with the front bolting.
It hasn't affected my EK at all
10-07-2006, 10:24 AM
BlitZ

Quote:

Originally Posted by Limbo

I took that piece off. The exhaust is strong enough with the front bolting.
It hasn't affected my EK at all

hey limbo,
are u running flexi or the spring joins?
10-07-2006, 10:25 AM
barefootbonzai

I was running the full OEM setup with the spring bolts and JDM cat.
10-07-2006, 10:33 AM
vinnY

Quote:

Originally Posted by Limbo

I took that piece off. The exhaust is strong enough with the front bolting.
It hasn't affected my EK at all

speaking of the front bolt. anyone know what size it is or where to get one? lost mine while replacing the headers a while ago and now reverted back.
10-07-2006, 11:37 AM
Limbo

I ran a new flex, cos my headers had the back chopped to fit in.
10-07-2006, 11:47 AM
Riceboy

There is a special hanger to matchup with the exhaust manifold. Can let you know the part number if need be.

Dont really need it. I removed it as it was a PITA to put back on when the engine is in the car.
10-07-2006, 11:48 AM
bennjamin

+1 vote for "Not needed"...
10-07-2006, 11:54 AM
BlitZ

Quote:

Originally Posted by Riceboy

There is a special hanger to matchup with the exhaust manifold. Can let you know the part number if need be.

Dont really need it. I removed it as it was a PITA to put back on when the engine is in the car.

its the silver one on the left..
http://www.sandmracing.com/images/m/...brackets02.jpg