[Euro] Apexi Power Intake (was AaronNg's "Secret Weapon" *REVEALED*)

Muahahahahah...

TEASER SHOTS TIME!!!!!

His Euro's latest mod, as far as I know, he's the only one to have it :D


Ok... It's made in Japan....

http://img.photobucket.com/albums/v1...pexiSRI/A3.jpg


It's shiny... VERY SHINY!!!

http://img.photobucket.com/albums/v1...pexiSRI/A1.jpg

http://img.photobucket.com/albums/v1...pexiSRI/A2.jpg

http://img.photobucket.com/albums/v1...pexiSRI/A4.jpg


I'll let Aaron tell you about it when I send it over to him hahahahahaha!!!!

All I can say is... You're PAYING FOR THE QUALITY AND FINISH!!!!

Have fun....

Do I smell something Mandrel Bent? :p

Header??

Could be an exhaust judging by the two different flanges.

Drool..................... http://img241.imageshack.us/img241/7718/droolrh0.gif

and the guessing game is on...

only one to have it... exhaust by the looks... hmmmm

My guess... Spoon N1 catback?

Straight thro pipe (cat replacement ;) ) hahah *shrugs*?

^ wrong... coz there's a bend haha

idea bunk bed frame?

is it a vacumm cleaner from japan?

its an air intake

Apexi Short Ram Intake ;)

http://www.eastwood.mb.ca/catalog_images/AEM_22-425.jpg

looks like sth to do with the exhaust to me

is it a bong.

maxim headers ftw

Looks like an exhaust to me too...

Could it be a "Feels" N1 or even more special an Amuse exo?

fujitsubo exhaust?

def. an exhaust part... not maxim works header, not feels n1 or amuse, nor is it fujitsubo... apparently he's the only one that has this to public (forum) knowledge. and all those items - someone already has :/

my guess is still spoon N1 or something like that... something you've never seen on a CL9 on an aussy forum is my guess...

i wish cat-man would just come clean lol

hehe spoon is not drool worthy

i drool on my spoons all the time... Im still guessing to what it could be though... just know its none of those others (at least not by what's been said so far)

HKS silent hi power~!!!! ;) jokes

omg that looks like my antenna

Quote:

---

Originally Posted by tRipitaka

is it a bong.

---

Only Bong would know :)

t-wing?

hotdog cooker

actually... he said it was related to an STD... so maybe it's a penis enlargement device... makes sense it's from Japan (jk)

Guessing from your sig. EuroAccord13 its either a DC Sports Headers OR a Custom Magnaflow Single Outlet Race Series???

Quote:

---

Originally Posted by misteR_bilzz

Guessing from your sig. EuroAccord13 its either a DC Sports Headers OR a Custom Magnaflow Single Outlet Race Series???

---

Dude, that item might be with me but it's AaronNg's mod not mine LOL :wave: :D

OMG... It's Japanese bubble wrap with a metal pipe to stop it blowing away!

Its the 2-1 part of a 4-2-1 header

http://store.clubrsx.com/graphics/00...6016_thumb.jpg

No its not a header, it doesnt have the rubber hanger. Most likely an exhaust system. The diameter seems like about 2.5 inch by comparing it to the size of the bubblewrap, so it must be one. Since it is from japan, could it be doraemon?

NOS bottle??

it's a bazooka.... it's secret weapon, what else do you think it would be??? LOL

ifs its not part of a header, then its a catback exhaust pipe, or the part connecting to the header

http://www.boomplustoys.net/images/m..._exhaust_1.jpg

Keep Guessing Guys...

Some nice guesses there I read.... Mmmmmm......

Makes me wanna do another TEASER SHOT to reveal a little more clue!! :D :D

*Staring at it now*

any price for correctly guessing what it is? Maybe a first chance to taste it? LOL

lol give us another clue ... we know its part of an exhaust.

It cant be an SRI even though you sneaked the pics in a folder called "Apexi SRI" :p

give us some more hints or i will headbutt that cat in the chest

Quote:

---

Originally Posted by EuroDude

lol give us another clue ... we know its part of an exhaust.

It cant be an SRI even though you sneaked the pics in a folder called "Apexi SRI" :p

---

Mmmmm... Seems like someone caught my trick....


Teaser Shots?????

Quote:

---

Originally Posted by EuroAccord13

Mmmmm... Seems like someone caught my trick....
Teaser Shots?????

---

lol had me there for a second

Comptech trolley pole 2000

is it maybe something to do with a turbo application....maybe its a dump pipe for a euro turbo system.........just a guess

I've decided to stop posting teaser shots...

Too much and Aaron won't have anything left to say LOL!!

Gotta admit though, lots of GREAT ANSWERS!!!!!

*Goes to pack the stuff back into the box and seal it for delivery*

Everyones imagination is amazing. I am impressed. :thumbsup:

Some kind of air intake?

The flange on the first pic looks like its not exhaust related!

Quote:

---

Originally Posted by amato2

is it maybe something to do with a turbo application....maybe its a dump pipe for a euro turbo system.........just a guess

---

hms a turbo or supercharger part is possible.

but i still think its exhaust/header related :p

its a exhaust piping, if it was a header, it would be more blingly n more stylish and would have the "valueable" look

It's stainless steel, with a flange which fits the exhaust (no intake has metal flanges that I'm aware of), and nobody has one.

I'm going for Mugen header (possibly full exhaust) -- which comes with a test pipe that slots in place of the cat.

mugen header doesnt come with a test pipe, but a full cat. Toda header comes with a test pipe but isn't a buffed polished finish

My apologies for confusing my headers. :)

I'm still going Mugen...

(Interesting: after all this recent header discussion about flex joints, I just realised the Mugen header doesn't have one!)

I still think its Intake related. That flange looks more suitable for an APEXi filter, its the only filter I'm aware of that has that shape of connection.

Although my 2nd guess will be an expensive High-Flow Cat from Japan, although not sure where the bend really fits in. The ones with the spiral honeycombs inside it that cost $600+.

Hmmm.. what a teaser :)

Quote:

---

Originally Posted by Tobster

My apologies for confusing my headers. :)

I'm still going Mugen...

(Interesting: after all this recent header discussion about flex joints, I just realised the Mugen header doesn't have one!)

---

haha, easy mistake to make... I found it interesting that the mugen didn't have any either... IMO not a good thing considering the k24 does move around quite a bit. Though i think some joints are flex joints.

maybe its a roll cage yahooooOO!O!!!

Actually, it could be a stainless steel bucket seat for AARONNG's black cat, come to think of it!

Exotic pole dancing pole…

haha, well apparently this mod will make his car 'roar'... so unless the exotic pole dancing pole, steel bucket seat, or roll cage come with a lion or a sound effects module it's unlikely LOL.

and i HIGHLY doubt it's any sort of intake. IMO it's def. an exhaust... just one we've never seen before

yep its too hardcore for an intake, four bolts is overkill. Plus there isnt any section to bolt into the throttle body like that.

It's the Hondata exhaust finally back from overseas!!
:D

umm...did anyone look at its location ? lol

http://img.photobucket.com/albums/v139/EuroAccord13/ApexiSRI/A4.jpg

^ROFL!!
Awww shiet..
Ben let the cat out of the bag :p

Quote:

---

Originally Posted by Omotesando

Actually, it could be a stainless steel bucket seat for AARONNG's black cat, come to think of it!

---

http://img167.imageshack.us/img167/2...ivercatop6.jpg

Quote:

---

Originally Posted by bennjamin

umm...did anyone look at its location ? lol

http://img.photobucket.com/albums/v139/EuroAccord13/ApexiSRI/A4.jpg

---

Refer to EuroDude's post. :)

^lmao

he is no longer black since he has stuck the optional white racing strips on it

Yeah - actually who was it that kept calling his cat a black one in the first place? :D Did the cat pic change btw?

Anyway, still can't decide what the W.O.M.D. is... upon looking closer the 1st and 2nd pic looks like the same side of the pipe. There could be some secret that could be revealed from the other side :)

Quote:

---

Originally Posted by Unkie

It's the Hondata exhaust finally back from overseas!!
:D

---

That's a good one! :D

I think it's time Aaron show the crowd what the actual mod is LOL!!!!!

All I will say is.... There were some SPOT ON ANSWERS.....

Bring it on :thumbsup:

I still think its the 2-1 part of a 4-2-1 header ;)

It must be like a dinosaur's penis cause a whale's penis isn't as big

Hehe, okok. Actually......... Eurodude got it right at first (I bet it's a guess through the folder name rather than the pics).

http://img166.imageshack.us/img166/6886/apexirb2.jpg

How is it? 4000rpm @ full throttle has the well-loved vtec sound. Using 1/2 throttle, it sounds like stock up to 5000rpm, just slightly louder (but not noticeably louder). If I didn't tell you about it, you wouldn't realise it even if you were riding in the car.

Wah!!! Dinosaur's Penis, so bling bling!!!

Eurodude is da bomb for pickin' it up even if its by the folder name

lol well my first assumption was an intake, then I saw the ApexiSRI folder name ;)

Where does the other side bolt in? Any pics?

Stock tubing is used? Quite a nice idea! How much fur did you have to sacrifice to get this?

i saw it today.... damn loud if full gas + vtec.... jesss,, my comptech icebox feels weak now :(

euroaccord13: thanks for the lower arm brace ;) cheers~!!

LOL ! I had you all there didn't I Muahahaha...

Stupid me to put it in the Apexi SRI folder LOL!!!!

BusterSonic ---- You're Welcomed, hope the bar arrived intact LOL! Have fun with it too!!!

its a kebab..
oh w8 its already been revealed, my bad aarroonngg

hopefully if i get a few missing pieces by friday, i'll have something sort of similar when i turn up to the meet....;)

Im a bit of a noob with CAI as I havent found one I'd like to install yet and still waiting for Hondata ..ppffft

IS that is a good spot to get cold air?

It is a short ram - excellent for power gains in short spurts - eg on a dyno or a run on the 1/4. Even better than a CAI for peak power gains as the engine has to create less vacuum to suck in the same amount of air.

But in day to day driving it gets too damn hot in that Euro engine bay for this to be a good option. I don't think there is very good airflow in the engine bay to force the hot air out. Just my opinion.

But if I suspect correctly - Aarong knows that and has plans for some sort of shield and piping of cold air to the area.

nice aaronng! Had me fooled... and i thought EuroAccord13, was being honest when he said it was put under 'apexi SRI' to fool us... damnit! That flange really through me off though. Bet it sounds a treat :D