My Teg slammed 4.5 inches

hey people.. this is wat happen when i went into tempe tyres to get my car lowered 2.75 inches rear and 2.5 inches front...
drove away thinking damn this car is low !!!! after countless bottom outs and a broken back i decided to measure it a day or 2 later.. and the result !!! 4.6 inches on the back and 3.6 inches on the front !!
how can they get it sooooooo wrong...?!!?
ill be calling them tomorrow.. we shall see wat they have to say =)
(4 pics)
http://img36.photobucket.com/albums/...CK_BREAKER.jpg
http://img36.photobucket.com/albums/...3K/slammed.jpg
http://img36.photobucket.com/albums/v110/FR33K/s2.jpg
http://img36.photobucket.com/albums/v110/FR33K/t.jpg

ROFL..

looks phat though... ;)

take off the clear lights and thats a mad height hahaha.. Looks tough, get stiffer springs/better shocks and it'll be sweet hahaha :D

From what i have heard, the mere mentioning of the word tempe explains the screwup

looks mad yes !!
but i might as well ride with no shocks... theyre practically sittin on the bump stops.. and i got shorter shocks in there too !!
as for tempe... remind me not to go there again...

Nah I reckon it looks pretty average - way too low. I dunno, I just have a thing against cars being lowered so much so that you can't see the tyres.

ROFL - did they just that the springs out and forgot to put new ones in???

I was going to laugh harder at you but your a doggy fan..

GOOOO THE DOGGIES!!!

I am going on friday night and bash a few roosters :p :p

when he got the box out with the springs in it.. i was like.. "uhh theyre for my car...." haha
there is no space between the coils !! theyre were so close together...

hahahah u noticed the little sticker !!

hahah that is SLAMMED ! ouch, looks neat tho, but i bet its only good to look at.. n not drive haha.. dunno how the hell they messed up tho???!!

dude, i hear where you are coming from... mine was a bit lower than that

and the ride sucked ass.. only kept it at that hieght cause it looked phat azz :D

but then i got defected and lazy :(

nice, but way to low

lol u cant get much lower without rubbing.. mostly if u have 18's !!
theres no way im keepin it like this... unless i wanna park it in the garage and stare at it =P

lol i wonder what it'd look like that low with my 14" wheels and hubcaps :D

Quote:

---

Originally Posted by FR33K

as for tempe... remind me not to go there again...

---

you should have done a search

i wouldnt be surprised if they cut your old springs and put them in the box lol

lol thats slammed.
god damn.

thats pretty bad. i wouldnt be a happy camper if that happened too me.

lol how did u measure it??

screw ur camber, tyre wear, traction and cornering grip up real good.....tyre factory also no good (i fink)

Tempe Tyres strikes again....
I've seen that number plate around before....

maybe they thought 2.5 inches from the ground.... haha

FRR33K your just a 'wannabe' P-I-M-P :D

And like I have told you, they saw you were "one of them" and thought that since you said you wanted it lowered by 2.75 / 2.5" that you really meant you wanted it slammed "hard brah" :P :D

love it mate..

it's looks sweet..

All he needs now is hydralic sussy then he will be pimpin.. hahha and one of those bouncing sussy mods also..

ROFL

thats slammed, looks hot dude...

u got 18s?

That is slammed hard! hehehe, i reckon it looks awesome. But you will need a kidney belt if you want to keep it at that height.

aha well to answer yours questions...
how i measured it was from hub to guard... stock rear was 380mm.. my rear now is 265mm !! big diff

nobb: my wheels are 17's...

i called them up and they said it was my fault for using shorter shocks...
now im gonna have fun tomorrow changing everything around to figure out wat the problem is =(
i hope its not the case !! hehe
thanks for ur comments guys

wow. you managed to drive it like that? look at the camber! wow. I dropped my car as low as it would go on coilovers at a couple of shows last year and it still wasn't that low and there is no way i would dare to drive it (could only fit one finger under the bodykit anyway!)
what shocks are you using?

yeah i manage to drive it !! (with great difficulty).. i live 50 mins away from where i got it lowerd too haha.. and ive been driving it to work everyday..

not using any fancy short shocks =D just stock civic ones heheeh EF to be exact.. they are supposed to have more travel in them then teg ones..
i just hope its not te reason the car is so low

Get ready to replace tyres every 6 months. Oh, and also expect your bump stops to get damaged regularly and other bushes and control arm bushes to crack and also get damaged. ;)

if they farked it up, and it looks like they did. if they do refuse to fix it up and raise ur car to a normal lowered height, then threaten consumer affairs on them, usually gets companies moving real quick. but hopefully wont come to that

oh yeh, it looks phat! but a pain to drive i imagine

hehe theres no way im keeping it like this !! puttin the springs on my teg shocks tomorrow to check if the problem is the springs or the shocks..

and i rang them today and he said if he has to order new springs hes gonna charge me labour... i said yeh goodluck !!

nuh man. dont take shit from him! i mean he has stuffed u up, so he has no leg to stand on if u push the matter... and why should u pay twice for the job they stuffed up. bad position to be in. hope it all gets sorted

Yeah dont take that shit from them. Stupid dodgy place, also when they finally fix it or whatever tell them you and all of your friends will never ever step foot in the shop again. Should add some salt to the wound.

ahh they will know !!!
(dont forget it still could be my fault hehehe)
hope not...
even if i was using shorter shocks dunno if theyd lower the car and extra 2 inches...
maybe they will.. who knows.. we'll find out tomorrow

GO THE DOGGIES!!!!!!!!!!!!!!!!!!

and DAMN, that is hella low

Got Defect??

nah no defects.... yet hehe
only been like this for a couple of days and so far havent run into a coppa =)
dont wanna jinx myself now..

GO THE DOGGIES!! hahah

Who going to the game on friday??

damnnnnnnnnnn !!! just stuffed everything up even more !! =(
tried to change my rear shocks over to my old teg ones... couldnt get the bottom damper bolt off on one side and now its screwed damnit !! gotta drill it out !! farrrkennn
ur supposed to have some load on the car when u take it off coz it moves around.. but with the car on the floor i couldnt get underneath...

any1 got any ideas... other then bashing it.. swearing at it... :(

Quote:

---

Originally Posted by FR33K

any1 got any ideas... other then bashing it.. swearing at it... :(

---

if you've already tried that... then sorry i'm fresh out of ideas ;)

Sell the car and start again...

just kidding.... take it to a pro....

yeh, u shouldnt be fixing it anyways if all this is cos of the people who lowered it. make them, or perhaps someone better to fix it for u. at least if u go to another pro then u can also get a second opinion as to the fact that its not ur fault your car is too low as u were told

I still wanna know how you get that low! so using the stock EF civic shocks, is that on all four corners and did you have to swap over any other suspension parts? of course this is not to drive around on regularly but it would be nice to have a bit more travel and posibly get the suspension engineered and be able to go as low as i am now, but legally.

hey i dunno how i got this low either haha !! went to hannys today and he told me that the car was so low coz of the shocks =/ ... they are EF civic shocks.. stock.. theyre shorter and they bolt straight in.. no mods needed..
as for the extra travel.. the car is bottoming out on he slightest bump.. dunno if its from the shocks hittin bumps stops or springs so compressed...
heres some pics.. first 2 are front springs.. 3rd is rear..
http://img36.photobucket.com/albums/...ontsprings.jpg
http://img36.photobucket.com/albums/v110/FR33K/FS2.jpg
http://img36.photobucket.com/albums/v110/FR33K/rear.jpg

shifty stuff man, where did they get the springs from? ordered? or what?
they kings? i know when i did mine a while ago on my crx i told them how much i wanted it lowered, two days later they arrived at the shop i got it done at since they made them for me..

thought came to mind they had them lying around and thought theyd get rid of it to u possibly?! :roll:

my bro got a 91 LS, recently got it done at pedders, did a real good job handles like a go cart.... lowered 3.5 back 3 front (pretty sure) with koni adjustable shocks... no bottoming out or rubbing or anything its beautiful since the shocks are stiff and keeps it from bouncing and hitting whatever...

they supposedly ordered the springs from K-mac.... they said 1 day....took over a week since "the machine broke down" and then "they were out of material"...

pedders dont go lower then 1.5inches though ??

1.5"? well my bro got his done much lower, anyone can do it just depends if they want to... maybe they are 2 law-abiding and dont wanna do illegal/defectable work...
eg when i got tints done a while ago on my crx, i wanted over the legal limit darkness, they agreed by with no receipt...
my bro did get a receipt for his work though..

pedders granville on james ruse drive did his..

Holy shizen those springs are mega compressed! :O

thought id let yas know that the problem at the back was the springs... the problem at the front was the shocks... interesting.. all fixed now.. =)

Dude.... keep it slammed LOL :p

i hate people consistantly telling me to drop it again, after the height it was at

well.... u saw the pics :D

one day i will chuck the springs back in, after i customise my driveway ...ahahhahahhahha

ahaha got very annoying
still fairly low though.. bout 3.2 inches.. perfect !
and the ride is 10 times better

FR33K,

Did you ever go back to Tempe Tyres and have them fix the springs?
Were you quoted and extra?


Unfortunately I have suffered the same fate as yourself from Tempe Tyres.
I had 18" Rims thrown on and they offered to dump it at the same time for $400.
After telling them I wanted 1 inch. My car came back with what they informed was 2 inches.. I dont drive my car alot at the moment but the ride home was not fun.
Not wanting to put the blame straight on them, I went for a checkup at Pedders who confirmed that the dump was over 2.5 inches. My shocks were bottoming out and my poor bump stops were taking a flogging due to it.

I called Tempe Tyres today who informed that the blame was my own as I would of asked for that specification. They would refuse to admit fault. I am paying another visit to the store over the next week to force an agreement on the fix..

well.. i went backwards and forwards.. an NO !! he would not accept the blame !!! (but it would truly be KMACs fault coz they make the springs..)
anyway i was offered a new set of springs at no charge.. i agreed.. and when i said i wanted 2.75 inches he wouldnt do it for me coz he sit it will be just as low.. he wanted me to get 2 inches...
i got sick of arguing so i went straight to kmac showed them the car and said this is how high i want it blah blah.. he said ok and reset the springs at no charge (but i did take them out myself in their car park...they wouldnt do the labour part for me)
and i got a free camber kit in the process.. drove off without paying haha.. thats for f#@king me around..

http://forum.hot4s.com.au/messagevie...threadid=21487

read that.. its happen to so many people

Thanks for the quick reply man..
I will head back and show them the damage this week. I wish I saw all these comments a month ago :(

Noice ride by the way.

thanks buddy
let me know how it goes..