Printable View
hello thought id post my final result of my diy amber lights took me about 5 hours all up first time taking dash apart and heater control took me about 4 out of the 5 hours very hard to get screws undone. well hears a pic what do ya think
http://i102.photobucket.com/albums/m...al00/amber.jpg
tight :thumbsup:
props for effort man :)
looks nice big ups to me helpin u out with the cluster plastic and drivin u to shops to get bulbs, amber paint stuff :p
you didnt help at all i did it all myself:angel:
:eek: :eek:
very nice..exavtly wat i want with the climate controls but i can't seem to get that part off...would u be able to show me rougly how to do that?...
i've already d one the cluster one though.
thanks
looks awsome dude
good work
same hu as me :P
looks the goods top work
Quote:
Originally Posted by thaaznboi
i found this awesome thread on honda tech with all civic diy's
http://honda-tech.com/zerothread?id=642479
this is the heater control one or watever its a bitch to do but worth it
http://honda-tech.com/zerothread?id=661308V
thanx alot dude! much appreciated! will definitly give it a go
Q: whats the size of the light bulbs for the climate/heater control?
is it 5mm or 6.5mm?
thx.
just take one out and take it to the place where you get your bulbs from
the bulbs i believe are t5 wedge bulbs for the cluster but not sure about the climate control...
oh yeah, for my cluster there was 5x 6.5mm wedge bulbs and 1x 5mm wedge
i tried to do the climate control but it was to hard to unplug the cables :mad:
how did u unplug the 2 cables behind the climate control anyway?
(pls dont answer me with something like "just yank it out"/"just fcuk with it" :p )
thanks.
lol well i took it out abit as far as cable can go then put my hand behind the furthest one (easier one) and pulled so hard my finger was flat after lol. the other one on top i did same but got my friend to do it he had skinner fingers than me so he was a good help, or you can try pushing it out with like 2 screw drivers i tried that but didnt work for me. took me about 20 - 25 mins to get it out lol
Quote:
Originally Posted by mocchi
real bitch i think i spent one qhole hour getting those two cables out..i dont know how i did it..use a screwdrived and try unclipping it..from memory there are some kind of clip on the connector..buts its not easy
that looks awesome!
props!
a few of my leds are dead... so :(
looks good man.. i personally wouldnt be botherd goin thru 5 hrs for light bulbs n i would of done it a diff colour if i did
So far i pulled out the screws and the facia, recon you can swap the bulb covers from the front as opposed to going from behind (no homo) insted of taking the whole unit out?
Wow, i would not ever remove that unit again.
**** that
i'v done the whoe conversion
but mines a JDM auto climate control :D
ROFL ..me too never again!