Printable View
My friends DC5R has an ugly black number plate mount on the front bar.
How easy is this to remove? Do i just remove the number plate and un screw this mount off the front bar? Or would i need to remove the whole front bar off the car? Anyone had experience or know how to go about it before i attempt it.........thanks in advance. :D
omfg ian u bought a dc5r? i thought u always wanted the dc5s?
haha....answer the question please nick.
and "no", i didn't buy a dc5r.
there are screws.... just unscrew it.
once you do this tho... there is a screw hole RIGHT in the middle of the front bar.... so either live with it or get it covered and resprayed.
ahh cool, so the screws are accessible from the outside without taking off the front bar?
once removed, this hole you're talking about, won't it be covered by the number plate?
that is correct... just take the number plate off, and you should see one screw hole in the front bumper, once you take that one out you need to take the two in the main air intake out two.... these two are on a angel i beleive.
you'll also need to mount the plate somewhere else.
seems pretty straight forward.
but you say that i have to re-mount the number plate somewhere else?
can i just re-mount directly onto the front bar? shouldn't there be two screw holes to mount it back on?
i'll fiddle around with it and sus it out.....thanks dude.
or cut the plastic, so it's smaller than the plate.
so you can't see it no more?
just get a numberplate relocator.
I have mine down the the front left. but i got to live with the hole in the middle.
you can just mount it on an angle where the black plastic bracket is mounted, but you need the slim style plates.
here is a pic of how i have my numberplate at the moment.
http://i4.photobucket.com/albums/y12...a/P1020640.jpg
i have two L shaped bracets supporting the number plate. i also have the hole convered up. Tofu has his plate towards the passengerside airdrum.... you can buy these little kits off ebay and the like... or look at what they look like and make one yourself.
you can also see what tofu is talking about mounting it on an angel. if you look just above the plate you'll see 2 clips.... this is where the 2 bottom screws are for the original numberplate mounts.... YOU can mount the plate on this... but it'll be on a 45' angel.. and might be illegal.
great, thanks for the feed back and pic....helps heaps.
FYI, for those that want their licence plate relocated to the front left and don't want to mess around with any DIY jobs, you can always purchase a plate relocator off eBay like the one [Here].Quote:
Originally Posted by Tofu
Just to clarrify for all those that are considering puting their number plate off to the side, this is fine, however - if the plate isnt lined perpindicular to the length of the car, it will be deemed a defect.
Trust me on this one, first hand experience over here :wave:
Hey I got a type s, I was heart broken when i took apart the ugly massive chunk of black plastic(number plate holder) and found a screw hole. Ruined my plans. I simply bent the numberplate in half, used good double sided tape on each end of the plate and used that original screw that did that massive hole in the center hole on the plate. and it don't look bad at all.
cheers
Hey I have a Type S as well, white one too! :wave: :wave:Quote:
Originally Posted by EL_DC5
I also removed the big black POS plate holder, and bent the plate... looks good! :thumbsup:
any chance to get the pic of it, i want to see what is look like, thxQuote:
Originally Posted by suspicious1
I thought bending the number plate is an immediate defect.
the number plate cannot be damaged in any way shape or form, because the number plate technically is Government property.
Weird, my type r does not have a hole and I don't want to bend the plate so I use cable ties to secure my plate numbers.
It WORKS and it looks really nice.
when i bought the auto dc5 brand new, the black plastic number plate holder wasn't screwed down in the middle of the bumper.
Number plates cannot be on an angle to the centre line of the car.Quote:
Originally Posted by Tofu
If its bent, it could be defected, pending on the cop.
Like i said above, it has to be perpendicular (on right angles) to the length of the car.
Then technically its there problem not mine. LOLQuote:
Originally Posted by Tofu
if the the number plate is fitted within (recessed) the front grille, would that make it a defect? coz it would be slightly hidden, i would assume it would be?
My DC5R had the number plate fitted nicley in the front bumper when i bought it, didnt have the big black plastic.
Here is a pic of my DC5S with the chunky black number plate holder removed, and the number plate is slightly bent.
:honda:
http://farm1.static.flickr.com/124/4...eac2cacf_o.jpg
This is what i have done, and been running with for the past month. No issues so far :D Only pissed off to find that massive hole! :mad:Quote:
Originally Posted by Tofu
As for relocator kits, just go to a hardware store and purchase a L-bracket
Where did you get that small plate holder from :O
When I bought my Integra it had the big, ugly front number plate holder. I tried a few different ways to improve the situation, none of which mounted to much (they were either uglier or deemed the car unroadworthy).
In the end I just left well enough alone, and after a while pretty much forgot about it. That was until on 2 occasions when having the oversized mount saved my front bumper from damage, when a couple of careless drivers got too close when parking their cars and collided with the number plate mount.
Luckily all that happened on both occasions was a small dent on the number plate.
When I was at my local Honda dealer lately I noticed that many of the cars on the lot had smaller, less conspicuous number plate holders designed for slimline plates.
i cant seem to find a hole on my front bar :S
some dc5 come with the number plate mounting plastic screwed in the middle into the bumper, some don't...
hey kids
Finnally got around to get a few snaps of my nuber plate mount. All of you should thank jas_kidd32, for sending me friendly reminders ever few weeks :p
here are the pics
http://i4.photobucket.com/albums/y12...a/IMG_3120.jpg
http://i4.photobucket.com/albums/y12...a/IMG_3121.jpg
If anyone else wants some more "detailed" pics, just ask. I have a shot from under the bar, but its a bit hard to get a good shot, due to the ride hieght of the car.
Enjoy :)
cool brackets, very neat job. Anyone tried to steal the plates yet?
Thanks Robi. Would mounting the plate right in front of the radiator affect its cooling? Also, is it legal to mount the plates on the holes right in front of the radiator (eg. plate would be facing down on an angle).
no one has tried to steal my plates.... they arn't that cool :p
mounting the plate there isn't going to affect cooling what so ever. Is fully legal also.
It only becomes illigal if you:
- Bend the plate to mount it
- Mount the plate so it isn't visable from a 45' angle
Someone has mounted the plate on the two existing mounts... but then the plate is on a large angle. If you want to moun the plate there, i would try and put something behind the plate so its still flat.
That hole that remains once the plates are removed,
What options do we have of covering it up? Without respraying the whole bumper.
you wouldnt need to respray the whole bump, i'm sure you could fill it up and paint over it
put the plates on the side FTW!
mdidle seems ugly, having it on stock bends it down.
i got a hole too, i just removed the mount and screwed the screw back into the bumper. lol
that would look weird with just a screw in the bumper lol
i guess its easy to put the plate holder back onto the bumper when u want to sell the car.....
a more expensive way to get rid of the whole would be get a new front bar
how did u mount the plate?Quote:
Originally Posted by suspicious1
3M?? or screws?
All new OEM front bars come with a Hole now. :(
Quote:
Originally Posted by m0nk3y
Lol I bent my plate.. I reckon it looks kind of funny when the DC5's have their plate hanging on the bottom
dc5's look funny with stock plate mounts ;D side ftw!
wat do u do after bending it?Quote:
Originally Posted by Amusevtec
I think i saw someone screw it into the bumper.. But I didn't like the thought of that
I bought brackets from bunnings and got it to screw on to that.
any pics??
Yeah, i'll take one today..
there is a a relocator kit on ebay from US
number plate sides on the front/side of the front bumper
dont know if they will ship to AUS tho
i was thinking of putting 2 L bracket's attached under the right side of the front bar holding the plates, don't know how else to explain.. but would this be illegal. it wouldn't be perpendicular but close. it follows the point of the bar.
Hahaha thanks, took me all of 5 minutes to relocate the plate there, geez robi you could atleast not take credit for my handy work hahahaQuote:
Originally Posted by dreamshifter