dc2r with s/s tein coilovers,
i need to know what brand camber kits and camber bolts have people used with experience and recommendations please asap as i am ordering coiloovers next week
Printable View
dc2r with s/s tein coilovers,
i need to know what brand camber kits and camber bolts have people used with experience and recommendations please asap as i am ordering coiloovers next week
FRONT camber kit - try SKUNK 2.
REAR camber kit - try WHITELINE or SKUNK2.
Pm EG5 ( yonas) to deal with SKUNK2.
Pm Euro69 (hwoang) or pm Whiteline to deal with whiteline
^ or SPC, www.specprod.com I use them more than anyone else. Also Spoon Sports and a few others.
I have Skunk2 front and rear on my DC2R.
These are really good. Easy adjusting and they do the job perfectly.
Got them from JDM Yard. :thumbsup:
http://i13.photobucket.com/albums/a2...ofIMG_9023.jpg
http://i13.photobucket.com/albums/a2...ofIMG_9029.jpg
whats the price difference in the whiteline and skunk 2 and what is recommended
whiteline = about $30. Cheap. Simply replaces 2 bolts and adds washers to "give" more camber.Quote:
Originally Posted by IEVAQ8
Skunk 2 = replacement upper control arm and generally higher quality. About $180 i think ?
were can i get the skun 2 ones from?????????
I got mine from JDM yard, trader on these forums. :thumbsup:
Depends what you mean by "more". More positive camber or more negative camber. The whiteline kit only allows you to add more positive camber.Quote:
Originally Posted by bennjamin
i.e. make your wheel closer to or equal to 90 degrees to the road surface.
yup - the whitelien kit gives ONLY positive camber ( in small steps)Quote:
Originally Posted by revNhevN
Rarely would you need a kit that can give more negative camber tho.
would you need a front camber kit for a lowered 94 honda accord?
depends on how lowered it is...
any amount of lowering WILL pull your camber and thusly iuncrease your tyre wear.
So , if its alittle lower its OK to rotate tyres every 5000ks.
If its dumped then a front camber kit might be good to help with tyre wear
I was impressed wth the quality of skunk2 camber kits..got mine from USA front and rear kits shipped in 3 days- $490AUD..;)...Ebay
Out of all my friends and I, none of us have noticed any tangible increase in tyre wear from increased negative camber angles. Ranging from -.5deg to -3.5deg on an old datto. Bad TOE kills tyres really bad, not camber, so just get a good wheel alignment and call it a day (unless you are so low your camber is really bad, in which case your bump steer is probably so bad you might aswell give up anyway).