My ALLMOTOR Obsession - B18c built in process

I've alway been a ALLMOTOR fan and after so much reading and searching around all the honda forums. I've decide it was time to finish part one of the car.

After a long wait for this to happen, I finally manage to get the person I wanted to work on this setup.

The Car is basically a B18c bottom and B16a Head "poor man type R". Other work has been done to the motor previously.

I'll release more of the setup once its up and running. Will take approximately 1-2 week for the work to be completed.

Thanks to DynoDave for taking on the project, Barefootbonzai and JDMyard for their help with the items and Bennjamin for helping prep the car :).

Here some pictures of what its going into and whats going in.

http://i82.photobucket.com/albums/j2...666/redone.jpg


http://i82.photobucket.com/albums/j2...6/IMG_2694.jpg

The Final piece of the puzzle :)


http://i82.photobucket.com/albums/j2...IMG_2605_2.jpg

http://i82.photobucket.com/albums/j2...6/IMG_2604.jpg

Once the DynoDave has it tuned and running i'll post results. Stay tune.

daymmm looking good. it'll be sure to kick ass bro!

Goodluck with it. Wana hear this beast on the dyno.

nice man i wanna hear her open up ....wat u getting done to it beside the quads??

goodluck with the whole process!
hope it goes smoothly for ya :)

go david!

i've been in that civic and it goes quite good!

gl with it, should be awsome!!

coming up nicely Dave. :thumbsup:

Nice one Dave , ITB FTW

Hey guys

Thanks for the kind words. Atm its just a waiting game for everything to be put together. I've always wanted ITB (USDM influence) and i finally got the chance to snap one up.

Now just the process of headwork, ITB and tuning. Once all that in place we're looking good :).

Cheers
Dave

Very nice Dave! I was very impressed when I got a ride in your car and that was so long ago (and mistakenly thought it was a B20VTEC because of how hard she pulled). I can't wait to see what a beast she will turn out to be once you get her tuned.

Wow so jelous. ITB's!!!!

looking forward to actually seeing this thing do some track work, where it belongs :)

been on his car.. that beast rock man!
looking forward your other setup work..

Quote:

---

Originally Posted by Phamburger

..............Now just the process of headwork, .........

---

as i remember it, your head was already ported wasn't it?

Quote:

---

as i remember it, your head was already ported wasn't it?

---

Porting was done......

But when it was inspected it wasn't to standard to run the equipment i have in place. I.E Quads etc.

Thus a overall of the headwork will be looked at in more depth :).

Cheers
Dave

It's going to be an animal with the quads mate. Looking forward to seeing her in action soon...

dave i NEED to see the finished product

ps. my bro always sees the car next to the temple. i aint seen it since u bought it! LOL

i hear u get +10kw for every TB.
Add stickers and ur done.

Quote:

---

Originally Posted by Weq

i hear u get +10kw for every TB.
Add stickers and ur done.

---

If you've got a suggestion outside of whats already on the agenda, then i'm sure we're all ears...

Quote:

---

Originally Posted by Phamburger

Porting was done......

But when it was inspected it wasn't to standard to run the equipment i have in place. I.E Quads etc.

Thus a overall of the headwork will be looked at in more depth :).

Cheers
Dave

---

what do you mean by "wasn't to standard"?
do you mean you just have to do some match porting to the ITB's? or that the port job was no good.
And whos opinion might this be?

Quote:

---

superR
what do you mean by "wasn't to standard"?
do you mean you just have to do some match porting to the ITB's? or that the port job was no good.
And whos opinion might this be?

---

As i mention it will be looked at in more depth in the coming days/week. All i can comment on James, like i said earlier its not suitable for my current application and setup.

Cheers
Dave

Quote:

---

Originally Posted by superR

what do you mean by "wasn't to standard"?
do you mean you just have to do some match porting to the ITB's? or that the port job was no good.
And whos opinion might this be?

---

Gee's i wonder who's using this account...

Quote:

---

Originally Posted by fishman

Gee's i wonder who's using this account...

---

only a few of us really know.
So lets just leave that assumption for the rest of you - alone.

Lets get this car on the dyno again and running at wakie :)

Quote:

---

Originally Posted by fishman

Gee's i wonder who's using this account...

---

whats that supposed to mean
im interested because i took part in his last engine build.

*takes the popcorn out*

ITB FTW.....will be an animal.

What other mods?

Quote:

---

Originally Posted by bennjamin

only a few of us really know.
So lets just leave that assumption for the rest of you - alone.

Lets get this car on the dyno again and running at wakie :)

---

yeh dave better see u there on the july wakie i want a ride in that lawmower...

Quote:

---

MoyaWhat other mods?

---

I'll be more than happy to share what i've got running, just gotta be patient with me for this part of the car to be finish :)

Quote:

---

bennjaminQuote:
only a few of us really know.

So lets just leave that assumption for the rest of you - alone.

Lets get this car on the dyno again and running at wakie

---

I totally agree. Some good Dyno time and some fun in the sun with the car is what i've got plan. See you at Wakie Ben :)

just a reminder Phamburger, spots for wakie running out soon. drop me a pm if your coming :)

Quote:

---

.::F[L]Y::.just a reminder Phamburger, spots for wakie running out soon. drop me a pm if your coming :)

---

Thanks fly.

I'll send u a Pm in abt 1 week time. I gotta forcast whats gonna be up. But it shouldnt be an issue. Just need to double check some arrangement i might have in place :).

There is no pressure phamburger :P

shotgun first ride
:D

Quote:

---

Originally Posted by Phamburger

Thanks fly.

I'll send u a Pm in abt 1 week time. I gotta forcast whats gonna be up. But it shouldnt be an issue. Just need to double check some arrangement i might have in place :).

---

Better not drop out of it heehhe

Quote:

---

Originally Posted by Perry

Better not drop out of it heehhe

---

you too Perry LOL

phamburge is coming for sure ill make sure of that :)

whens this track day u speak of

one coming up very soon...http://www.ozhonda.com/forum/showthr...32#post1156632

Quote:

---

Originally Posted by Perry

Better not drop out of it heehhe

---

Shouldn't be a problem perry :). I wanna see that machine of urs run as well. From the parts you use it should be a beast :).

Be an awesome day once we're all down there.

Pham you need to run both WSID and wakie aye...LOL ...

I was lucky enough to have a look at the head for this build very nice,the head for the Online car was on the bench and both had some sort of different finish to anything I have seen Dave do in the past :confused:
ALLMTR996

just one more sleep david :D

nearly there!

"one more sleep til christmas!"

Quote:

---

gReY-oNe

just one more sleep david :D

---

Quote:

---

kyobibi

nearly there!

"one more sleep til christmas!"

---

Thanks :). Hope everything goes to plan... I believe it will be delivered on time as confirmed. If it doesn't then I'm just gonna have to wait till i can experience XTC for a few more days :) .

OOO The excitement :p

Does that mean it's drags tonite??!!???!

We all gonig to have a quiet one this week...

Still trying to prep the cars ready for compak attack next week.

Quote:

---

Originally Posted by Phamburger

Thanks :). Hope everything goes to plan... I believe it will be delivered on time as confirmed. If it doesn't then I'm just gonna have to wait till i can experience XTC for a few more days :) .

OOO The excitement :p

---

Excitment time.
Regards Dyno Dave

Well what a trip back home. I thought i was high on Drugs :p .

The feels awesome, sounds awesome and runs awesome. No more problems with the motor unlike the original first stage.

What so great abt it atm is that its UNTUNED (no dyno tune just street tune) yet it feel ten time better than what i left it at. Geebuzz can't wait till its on the dyno and fully running hot :). I can finally feel midrange pull with the headwork and ITB

DynoDave you did an awesome job with the car :thumbsup: :thumbsup: :thumbsup: . She runs like a beauty as is. I dunno what she's gonna be like when its TUNED. Still can't wipe the smile off my face.

Regards
Dave

Dam ITBs sound sexy

glad it worked out fine. Now go an ENJOY YOUR CAR!

just went for a ride its fficken nuts, vtec sounds crazy......dave u need better brakes man lucky i told u to stop early....very impressed, now i cant wait to get my motor back...

Quote:

---

Originally Posted by Phamburger

Well what a trip back home. I thought i was high on Drugs :p .

The feels awesome, sounds awesome and runs awesome. No more problems with the motor unlike the original first stage.

What so great abt it atm is that its UNTUNED (no dyno tune just street tune) yet it feel ten time better than what i left it at. Geebuzz can't wait till its on the dyno and fully running hot :). I can finally feel midrange pull with the headwork and ITB

DynoDave you did an awesome job with the car :thumbsup: :thumbsup: :thumbsup: . She runs like a beauty as is. I dunno what she's gonna be like when its TUNED. Still can't wipe the smile off my face.

Regards
Dave

Dam ITBs sound sexy

---

AWWW wow so i guess the trip was worth it
LOL
i shoudl of got the first ride
FAR OUT!!!! lmao stuff the coffee :P


well glad your finally happy man :D

Thanks for driving me up bao.
The taxi service was great :).

Can i have a spin in it Dave????

good to hear it has all paid off.

so are you coming to compak attack or wsid or wakefield? i wanna hear this thing yO!

Pass by JDMyard dave , show me this ITB orchestra

congrats mate its finally out... now we will be with u wen u run your car down the 1/4mile...

slow down on the roads and take it to the track hahahahahhahaha

told you won't be dissapointed, D-Dave works magic!

you definitely owe me a strap in your car.

i want video footage sounds awesome!

Nice one... I need a ride in this car now. Been a while since I had a scare hehe

Car tuned yet?

Quote:

---

Originally Posted by ginganggooly

Nice one... I need a ride in this car now. Been a while since I had a scare hehe

---

Hey Ginganggooly. You'll see the car at DynoDave new workshop sooner or later. More excitement being planned for this motor shortly to make this setup run smooth and deliver massive BANG

Quote:

---

Originally Posted by barefootbonzai

Car tuned yet?

---

:) Hey dang. The car still street tune atm, waiting on the all clear from the DynoDave. I'll keep u posted in regards to tune and i'll do my best to take video footage.

Regards
Dave :)

wooohoo another crazy honda unleashed :thumbsup: now go make some more noise :p

Good to hear that the car is now running the way it should have from day dot... So what else have you got planned for it? :D

Quote:

---

Originally Posted by ginganggooly

Good to hear that the car is now running the way it should have from day dot... So what else have you got planned for it? :D

---

Slim you'll see it sooner or later. You already know whats happening :p . With Dave helping with this project you get first notice of what his intentions are.

But if you wanna know i wanna get her tuned right first :) with the proper supporting parts in place.

Regards
David

Man took this car for a spin the other day, and geez it has balls for an untuned motor.

Absolutely love it. Cant wait for the dyno tune, should make heaps of different.

:thumbsup:

Quote:

---

Originally Posted by Phamburger

Slim you'll see it sooner or later. You already know whats happening :p . With Dave helping with this project you get first notice of what his intentions are.

But if you wanna know i wanna get her tuned right first :) with the proper supporting parts in place.

Regards
David

---

Nah... i've got no idea on what the future has in store for this car. All i know is that it's got some mean cams and a set of sexy quads :cool:

so what u mean by b18 bottom and b16 head? is that possible?

guys, for a b18c swap for EF7 would i need gear box and/or other bits change as well?

Yes you'll need to find cable gearbox, cable flywheel, Aftermarket mount, wiring, and etc. the list goes on. Your best option is to get a CRX or EF halfcut with a b16a in it from japan

had the pleasure of driving this thing the other day as well, very responsive.... Im loving it!

Cant wait for it to be tuned!

Quote:

---

Originally Posted by ThEbLaCk

so what u mean by b18 bottom and b16 head? is that possible?

guys, for a b18c swap for EF7 would i need gear box and/or other bits change as well?

---

Pm me, got all the stuff and info here.

hahahah ya the bast*ard that was racing me :P

NICE FU*ING ride!

all these people got a go dave - and you promised me the first run in hte new setup :(

*cries*

Anyway , sounds ballsy ! LETS get it to the TRACK ASAP !

Quote:

---

Originally Posted by bennjamin

all these people got a go dave - and you promised me the first run in hte new setup :(

*cries*

Anyway , sounds ballsy ! LETS get it to the TRACK ASAP !

---

yeah thats wat he said to me too
-_____-''
his like bao u can drive it
*shakes head*

Quote:

---

Originally Posted by gReY-oNe

yeah thats wat he said to me too
-_____-''
his like bao u can drive it
*shakes head*

---

*holds baos hand*

We dont need him. Pfft.

*walks off and drives baos turboed prelude*

Rofl :D

Dam ben I'm sorry dude. This car running abit rich atm. With ITB i never new how much petrol its drinking without a proper tune. Driving the car all the way to ur place would cause me to have an empty tank.

"Once fully tuned you'll get to hop in for sure" cause i'll have enough petrol to get to ur place. LOL

Bao you just lift early so no ride for u :p

Regards,
David

Quote:

---

Originally Posted by bennjamin

*holds baos hand*

We dont need him. Pfft.

*walks off and drives baos turboed prelude*

---

:eek: i dont get a ride either :(

davey pham.. i gotta hear this ITB..

dw ben bao and i will play the trumpet while you drive and it'll b similar to ITB's :cool:

i dont think im ever going to see this car..
im back down gong now =(

oh ross.. so i wont be seeing your car at yennora no mores?

hms.. just drove it.
goes hard.
chopppppppppppppppped my crx.
hahahahaha
nice one david.
=)
the ITB's are awesome.
lol.

Quote:

---

Originally Posted by destrukshn

hms.. just drove it.
goes hard.
chopppppppppppppppped my crx.
hahahahaha
nice one david.
=)
the ITB's are awesome.
lol.

---

Really good to see everyone is enjoying the car shame about the fuel usage I think I had better tune it.
Regards Dyno Dave

Quote:

---

Originally Posted by DynoDave

Really good to see everyone is enjoying the car shame about the fuel usage I think I had better tune it.
Regards Dyno Dave

---

:thumbsup: *thumbs up* for some awesome work Dave!

I agree with you tuning it :p. There's alot more you can pull out of this motor. Since we finish the work its basically plug and play, nothing been touch in term of dyno tuning and dialling in cams etc(apart from street tune).

Therefore i can't wait till she's on the dyno!!!!! ;)

Regards,
David