Printable View
omg guys.. my accord broke down...
the bottom pulling came loose.. and came off the block..
the teeth in the puller and on the block are chewed..
i dont noe wat to do now but stare at the car and soobing..
can i actually get a new bottom pulley??
like an actual lightened one or better one??
wat can i do??
so lost..
so depressed :(
"I'll Be Back"
Ken
You mean the crank pulley?
I just did mine two days ago!
If you are lucky, the thread won't be damaged and you should be able to just put a new pulley in and bolt it up. If you are unlucky, the damage could be worse.
BTW: A new pulley from Honda Australia is going to be EXPENSIVE! Call up Robert at Hanny's (but something tells me you're not in Sydney!
Ken, find out what parts you need and if i can help with getting new Honda parts for you i will. Just drop me a PM.
the thread??
in the pulley is like.. rounded off..
so i think its no good..
the thread for the bolt is perfect..
i need a new pulley..
a race one or something
cause i noe honda is expensive!!
You should be able to find a second hand one.
What exactly happened? I'm thinking the bolt has snapped, with some of the bolt still left in the thread.
Calm down a bit and explain!
i am calm..
the bolt is still normal.. no scratches. no thing..
like a new bolt
the pulley however is ruined in the middle.. the little cut in it is rounded off.. and those ziggy zaggy teeth are rounded too..
i think the bolt became undone.. and was spinning freely sometimes..
and suddenly today the bolt got abit more loose.. and the pulley started to tap the chassis..
after like 200 metres down road.. it went pak pak pak pak pak
then.. eveything was disabled
no power steering.. no nothing.. just for brakes...
my car i cursing it..
i also need a new steerinf colum..
cause when i turn it into ignition. no lights light up
so i made my own switch to manually turn it on..
my car is a junk yard.. someone help me@@
Ken
http://www.secureleadercom.com/exsto...ics/560402.JPG
i think i need one of these kits...
anyone help??
Ken
lol dude, i think u need to fix it up a bit!! dont give up on the accord! have faith...:DQuote:
Originally Posted by Spoon-Accord
Quote:
Originally Posted by Spoon-Accord
**Extends hand into monitor and replaces Spoon-Accord's pulley**
Geez man, just take it to a mechanic. Mine just snapped and luckily for me I wasn't moving at the time.
stuff that.. i dont trust any mechanics.. i dont even trust honda now!!
arrghhh
ohh wellz shit happens..
guess i have to look for someone who noes where to get these pulley kits from
Ken
HondWreck in Westall..speak to Keith i think his name was. Check www.yellowpages.com.au for number...i cant remember.
sorry to hear bro!! :(
good luck. :(
thankz jimmy..
i just hope to get this thing up and running
You don't trust Honda now...?
:evil: :evil: :evil:
Shame on you son.
Seriously though, this can happen to anyone. Just take a chill pill and work out what went wrong and take it from there.
no no vic u got me wrong.. imma chilling already..
imma cool..
its alright..
atm.. i dont trust any mechanics..
everyone makes mistakes..
but not on someones car cause it get very frustrating..
Vic.. try and get some info on the pulleys for me..
cheers
Ken :lol:
guys
also wondering
my pulley is stuffed up atm..
if i bought a pulley from like a H22a which is a larger pulley..
would it increase my performance?
i just read a thread in some other forums
just need some input from peoplez!!
Ken
A lighter pulley generally gives you better throttle response. An underdrive pulley 'may' give you a bit more power.
But it all depends on the weight of the pulley, where the weight is distributed.