The Jazz has an integrated head unit. But has anyone changed theirs? and what does it look like? Pics if possible please.
Thanks
Chris
Printable View
The Jazz has an integrated head unit. But has anyone changed theirs? and what does it look like? Pics if possible please.
Thanks
Chris
you have to mount yr HU else where. I am going to do that soon. It is not hard but I have to build a custom box for HU to store.
i seen ones in japan which go in the factory location, but they mount it on a different panel or something
yes but in japan jazz only
=(
The is a different panel that you can buy from Japan. You also need a different bracket. This will give you a standard double-DIN opening in the dash.
I have been struggling to find the part numbers, but there is one Jazz in Sydney that has done the switch-over. The parts cost about $250 and it took almost a whole day to change it over....
A job not for the faint of heart apparently.
oh... bugga. although i haven't tried it yet, i think the stock HU is not the best right? cos i wanna change it
To be honest I don't find it too bad at all and I have always had big systems in my cars...
I would like a different headunit simply because I have far more MDs than I do CDs, but there is an "AUX" button so I am guessing you can connect an ipod or whatever you want in to the back of it if you want to....
justin: do you know if the guy who did it is on these forums?
i would love to get those part no.s if anyone has them and if i ever do find them (one day . . . . ) ill post them up!!!
Pete :)
Nah he's not on the forums.....don't even think he speaks English!
I still can't believe I have lost the link to the part numbers...I can find anything and everything except for that!
justin: thats cool np :)
i just emailed bel about it (i think again) so hopefully they can help out
Pete :)
maybe fhrx could make something up? :D
I may as well get u that plastic =)
wouldnt be this by any chance?
http://babelfish.altavista.com/babel...to%2funit.html
i guess this site would be of some help but i dont understand the language and babelfish doesnt seem to want to translate it
http://www.mobile.sony.co.jp/
re that sony site...i got this much out of it:
http://www.mobile.sony.co.jp/sony/pdf/fit_02.pdf
tut's u how to rem door trims too with speaker/pod measurements too!
krazy!
anyone installed any aftermarket speakers in their car?
WOOOOOOOOHOOOOOOOOOOO!!!!!!!! :D :D :D :D :D
thanks muli :D
i wonder if thats the price on the side too?
77250-SAA-000ZA (dash part) 2900yen?
77255-SAA-901 (right bracket) 500 yen?
77256-SAA-901 (left bracket) 500 yen?
does anyone know about the 20 pin plug? is that a necessity? or can i use the plug on whatever aftermarket headunit i get?
Pete :D
I probably will be going to.. can tell you all about it when I do :)
weve got enough ppl for a group buy dont we?
i only want a single din tho....beggars cant be choosers i guess
yeah im goin to do it too!!
i want a tv/dvd to go in (and eventually a playstation- i figure you can fit one in the bottom half of the glovebox) but it is all in the gunna motorsport stage :roll: :oops:
have to speak to marty.
as for a single din jus-10 said there is a plastic cover you can get to cover up the 2nd din hole but dont have the part no. :(
btw has anyone had 100000 ppl tell them that in the jazz they have to put aftermarket headunits in the glove box?
Pete :)
That link is the parts....seems pretty cheap though.
The other thing you need to remember is the the stickers for the air conditioning controls as I believe they are very hard to remove, so you may need to buy new ones. If you want, wait until the update comes out and get silver ones instead of the grey ones....
A group buy would be good. I'd be in that for sure!
As for the single din thing, you can just get a pocket thing for the other space. It is probably a pretty standard issue part for a lot of Hondas (don't quote me though) There is a specific one for the Fit on the Honda Japan site though....
The guy in Sydney who has done the conversion has said the wiring is a bitch....he didn't elaborate but it is part of the reason it took so long to do apparently.
Speakers in the doors are 6inch. Pretty easy swap if you get the right speaker (that is not too deep).
GROUP BUY!
No group buys on Ozhonda thanks.
http://www.ozhonda.com/viewtopic.php?t=6263
SHUT DOWN! by wyn hahaha
just do it over PM guys ;)
Sorry, didn't mean that we should organise it as a OzHonda Group Buy....more of a group of Jazz owners who may want to buy the same part.
Can I ask why the no group buy rule applies? Your thread/link doesn't offer a great deal of explanation/justification...
I will be in if got any group buy.
Anyone lead us? PM us pls....
im in as well pm me if this thing works out, ta
would this work, of course if the price ends up being reasonable
http://www.ozhonda.com/viewtopic.php?t=8106
Yes it would work. I ordered my Fit badge through JDMyard
maybe we can ask jdmyard if we can get cheaper for order in numberS
hypothetically, if one were able to source the panel and the 2 mounting plates ;) .....the issue of the plug still remains. Does the 20pin plug look like any other existing plug? Does it look familiar to any honda driver out there? this is a honda forum after all.....
otherwise, it shouldnt be too hard to just diy wiring. almost half the pins are redundant.
ok, i have no experience with the Jazz 20pin plug, but what you can normally do is get a harness from places like Dick Smith or AutoBarn.
these harnesses are usually suited to your car..... you just plug your factory honda plug into the harness, and then wire the harness into the plug for the head unit. that way there is no need to snip your factory wires.
however, if you guys are raising issues abotu the jazz 20pin plug, then maybe the harness is not available
look what i just found:
http://www.nexxia.co.uk/Headunitfittingkits/honda.htm
it looks like the wiring harness for the jazz is the same as some accords and civics
autobarn sell them for about $30
good stuff.
twas hopin it was the same harness as something else.
looks like were all set :D
if anyone sees or speaks to jus-10 and wylo3 could you tell them to check their pm's.
thanks
Pete :)
count me in as well...:D
does the stock head until play mp3 cds? all my musac is on mp3 discs cause my pioneer unit was in my EK4.. bugggger!!
I don't believe it does
are you guys talking about swapping H/U for JAZZ ?
I've done a view already, but to explain it in this forum
its quite hard, but as soon as you've got the dash kit and
the bracket, I reckon you can just follow from there........
how much did the parts cost you?
looks pretty nice tho
so anyone have any contacts in getting the JDM FIT center console to suit a single din HU??
i have contacts and part numbers...will have to call up tomorrow
anyone want any?
It's the same thing but you just add a pocket to make it single DIN...there is no big secret to it.
they dont have for a single H/U, but as "Jus-10" mention what u need is just an original honda pocket, same as i did on the jazz with TV screen one, but the pocket its on top of the screen so when its open u cant see the pocket, because i dont want the air from the A/C blow direct to the back of the screen if i put it the H/U on the top part, and its not really good for the LCD screenQuote:
Originally Posted by Tofu
oops...my bad
i mean for double din
aka_nsx
do you have the part no. for the pocket?
Pete :)
if u r in syd, I reckon just call honbit / hontoys for a pocket, basicallyQuote:
Originally Posted by petrovski
you can use any pocket as long as honda one,
thanks
If anyone wants the aftermarket dash parts for their jazz pm me for details by this Friday 3rd september!
Pm's ONLY!
Pete :)
aka nsx, where abouts did u run the wires through the firewall? near the battery where two pipes run thru the gromment? or nearer the driver side where the relayed power goes thru? i tried the latter but i couldnt make the grommet budge! any tips?
honestly i can't remember which side but usually i run the cable the one that close to the battery, and the grommet its a little bit hard to push you need something very pointy, remember if you make the grommet bigger DON'T FORGET to put silicone otherwise water might go in . . . . .
i just ran it thru the hole on the driver side where the fused power goes in. Im not too worried abt water goin in...cos if there were *that* much water in the engine bay id be in trouble anyway...but the grommet does keep out a lot of engine noise. moral of the story: ghetto way of hearing more engine/ pretend-induction noise is to remove the grommet.
hi guys
just joined the club few days ago and would like to find out more about the aftermarket headunit conversion.
how much does the panel cost to be delivered to brisbane?
is it going to be an easy conversion?