Printable View
ey guys ..
im just wondering, if you guys/girls can give me suggestions on how low you think my car would look good without scraping humps alot.
at the moment there on ek4 with 195/50/15 (not normal size of 195/55/15)
pictures are below of what my car looks like..
thanks guys/girls
:cool:
:honda:
about 20 inches front and back mate
yeh but
what? superlows
i just want to know what type of springs i should get?
most likely il find one on ozhonda used parts from someone :D
my friends got ek4 and he lowered it 2inch all around looks nice,
plus if they are brand new spings u are putting in when driving in time it settles in and sags down a bit so it will sit a bit lower as well 2inch and a bit keep that it mind ..
2inch all around, nuff said. it will sag to 2 and quarter afterwards when it's all settled.
some people lower 2 and a quarter. then all regrets due to it sagging to 2.5, ive got mates that have did this to most their cars. well as me and jamezy recommend, 2inch all around and wait till it settles nuff said!
:thumbsup:
so u reckn i shuld get 1.5 inch used springs
so wen i put it on my car it wuld be 2inch (cos its been used and sag down)
thanks for the reply tho :D
YEH BUT i would most likely be buying used springs and shocks
yeh i thank you for the replys and recommendation :D
if u get 1.5 inch it wont sag down to 2inch no wayyy it will say onli bout quarter inch
but it depends on the spring if its brand new or has been used
so you reckn 2 inch used springs and shocks?
do you have a picture of what it looks like?
does it scrap everywhere, cos i normally go to random places that has ****EN humps everywhere and it piss me off.
bloody city
:d
ahahah well like a say u gota scrafice for looks when it cums to lowering ur car ill try grab pics for uQuote:
Originally Posted by adu
bahhahah true that jamezy
yeh thanks man :D
I RECKN it wuld look hot lowered tho ..
HMMMM beautifull
http://i185.photobucket.com/albums/x...1111111111.jpg
there you go my mates EK4 sits very nice
thanks jamezy
is that xtc-romeo?
np man yerpp dats him alright lol
And if there good springs or not. High quality springs wont sag at all, there free length, loaded length and spring rate will remain constant for its life, unless it is structually dammaged in its use somehow.Quote:
Originally Posted by Jamezy
Good quality springs like this are much harder to find than springs that sag, hense why pretty much everyone assumes that it is a normal and acceptable thing for a spring to do.
Springs that sag are bad for performance, which im not going to get into unless somone really wants to know why. Its nothing to serious at all for a street car, more if your after the best possible performance.
Ive been testing my eibach springs, and my cars still at the exact same height is was the very first time i lowered my car off the jack, with the new springs:thumbsup:
go for coilover if u can afford.. bet ya u want to go more lower once u get your one done.. :p plus u can adjust the height anytime.. :thumbsup:
i know i want to lower mine more :p
cant afford coilovers lmao
:D
:honda: POWER !!
kingsprings superlows with your stock shocks du..
end of story
love ya terry :D
AH HEM ..
u know what to do buddy, pm
lmao
bored much?
the ones on xtc_romeo's are the pedders ones. forget the part number.
but yeah
not too shabby.. aslong as ur exhaust dont hang to low you'll clear the humps with abit of snake action
lol
on the stock ek4 rims u wont find ANY scrubbing at all.. esp with 195/50/15 i got same tyres.
my car is on its ass atm.. and it gets into most car parks ok.. lol just abit of scrapage on the ehxaust thats about it. but i have the luxury of changing the height
hahaha
lmao, my exhaust should be fine :D
lmao 'luxury' LUCKY YOU
dupac you got a pic of ur car? with the ek4 rims n the lowered springs on em?
thanks to the reply
not at its height atm..
but will do when its daylight
just for you
LOL
if i cbb