Printable View
Pretty easy modification, took a few hours (you can tell from the shadow on my car lol) from my xmas arvo to complete.
But well worth it :thumbsup:
Before
http://widget.slide.com/rdr/1/1/3/W/...3nCDMUPOuF.jpg
After
http://widget.slide.com/rdr/1/1/3/W/...BcszO2u8gR.jpg
patiently waiting for more parts to come ;)
nice work! where did you get the lights from? any other additional parts required apart from the tail lights?
tail light gaskets.
I used gaskets, 2 blubs and ap2 tail light wiring loom plugs. I re-did the plugs instead of sanding / modifying the ap1 to make them fit.
excuse my ignorance but when you "re-did the plugs" do you mean you just cut the wire to get the original plugs off and put ap2 ones on the same wire ?
??? HE just said what he did in the post about yours...
"I re-did the plugs instead of sanding / modifying the ap1 to make them fit."
Maybe don't post on ozhonda when your high mate?
Didn't need to cut the wires, just pulled the wires out making sure not to damage the metal soldered bit and inserted the metal part into the new AP2 plug. No cutting or soldering required. :thumbsup:Quote:
Originally Posted by zerospel
cool thanks mate, just considering to do the ap2 tail lights as well, looks very nice!
whats going on it next?
A bunch of carbon fiber Chargespeed bits, wheels, exhaust and stereo. Should be good when it's finished. ;)
Hi Parkes,
can you post a link where you get the AP2 tail lights and gaskets please? Was it much for postage as well?
Looks really great.
Hey mate,
I can't really remember how much the tail lights were. For some reason I keep thinking $550 from the US delivered with all gaskets and brackets.
:thumbsup:
sounds about right.
Can someone tell me if the AP2 lights are fitted, can the AP1 lights go back on later or is this a one way trip? That is, does the metal work have to be trimmed as well?
The modification to the bodywork is a definate trim job. Involves hacking out about 2 of the Ap1 bolt locations.
I just bought a pair of rear lights today..... i got all the wires do i need to drill and thing or cut anything on the car ?
If It weren't for the fact I have a headache, I'd bash my head against the wall.
lol ludecrs
djbinh .. it involves a lot of cutting
lolz after the cutting
how much screws can you use to bolt the ap2 lights on
does anyone have a diagram
from memory all 4
man i dont noe how to do it im selling my ap2 rear lights now sigh
where are you located its so easy man all you need is a dremel and cut away lol dont give up for no reason what for? seriously search man its so simple.
one thing to start off you will need this comes with everything you need gaskets, a template to use as a GUIDE! this will help you start off cutting and for your wiring aswell.
http://www.hardtopguy.com/store/prod...&cat=11&page=1
now use this as a guide go to this website and then go too the tailight conversion and this is the guy i used to go by ;)
http://www.s2ki.com/forums/index.php?showtopic=200157
if i get the parts do you want to help me
do u have the gaskets?
i dont noe i got it off a ap2 even the wires
not sure if u need the gaskets or not but yeh i would get some tail light gasket :)
gasket are all over seas
So order them....
$50, and a 2wk wait from Honda Japan.
what does the gaskets do ?
just sell me your tailights and save your self from the headaches youve got. i will make betetr use for this if you want, offers there.
cheers.
PM sent