hey guys havnt seen much ej8/ or em1 times wouldnt mind knowing what the coupes can do :) post some times up i dont have any on mine..
Printable View
hey guys havnt seen much ej8/ or em1 times wouldnt mind knowing what the coupes can do :) post some times up i dont have any on mine..
go for a run and see mate :D
I believe justins old White K20 Coupe ran 13.1 or somewhere around that. Im pretty sure it ran a 61 around QR aswell.
mine does WSID - 14.3
Stock with IHE should be good for a flat 15 or thereabouts
ive seen afew forumers em1 get around 15.8's to 16's i dunoo how well the drivers are.. but yeh.
lol.
b16a in urs blitz? nice time
i ran a 14.9 in my ek4. but still room for abit more improvement lol
First time out in my EM1
14.98 with I/H/E
I doubt a b16a can hit 14.3 in a 1200kg car
i think hes got a b18c7 in it
Considering EM1's are the same weight as ek4's you'd be looking at high 14s to high 15s depending on the driver ( with just basic I/H/E and possibly stripped)
i m guessing EK sedans are about the same weight as EM1??
i ran mine 15.60
shit time i know... but im a noob
i think sedans might be a little heavier than the em1 cause of the extra doors and trims. =/ just a thought.
i dont think the em1 is the same weight as the ek4. on paper its 14kg heavier.. i find that hard to believe..
Quote:
Originally Posted by rawr
I think barefoot got around that time with B16a.. even std from memory
...
lol.. my car was semi stripped but with a heavy driver :(
driver weight reduction is needed..
depends if ur talkin circuit or drag. got a 1:52:436 around winton race track in my EM1, but not drag cos car is now ride off
Winton - 1:50.5 around winton long course.
Was my first time there, on street tyres and with a broken rear sub-frame(found that out after the day :() My fastest lap was in my last session.
My second time at Winton i got a 1:44.2 on the long course in 37 degrees...
Changes from the last time I was there were: Advan AO48 semi's, ITR b18c conversion, a fixed rear sub frame, stripped rear section, hasport mounts, ITR brake master cylinder, Motul high temp brake fluid, toda headers(replaced the 5zigen)
Barefoot ran high 13 i think? But im pretty sure that was with a B18.
I got a 63.1 QR and a 14.3 1/4
barefoot done 13.4 or something.