Printable View
hi guys..is it possible to have a full HID setup with the projector angel eye headlights? using h1 globes and ballast i presume? have you guys done it? also my projector lights arnt working? halos and high beam work but not projectors?
thanks in advance..cheers
yeah it's pretty easy to replace the stock bulb with HIDs, the bulbs came with the aftermarket projectors are usually crap just replace em to either HID or halogen to make your projector work again...
u have to check and c if your angel eyes are compatible with HID's but, coz sum cant handle em..
any got a pair of one peice angel eyes running HID on the projectors?
friend of mine does one piece did u order yours from america? or where?
there's a seller from NZ,
alot of peole run HID's with their angel eyes, but as a i said before it depends on the type of eyes you have, theres a new zealand seller on ebay, and really with the xchange rate as it is, you could buy em from america with a much wider range and it'll still come out cheap, u just gotta remember to have em angeled correctly then.
so basically people buy the stuff from US and try aim the cutoff so that the cutoff is in a straight line so that it doesnt glare into oncoming traffic??Quote:
Originally Posted by kazam
yeh coz obviousl americas left hand drive is aimed at shining the opposite way to our right hand drive. so once brought here instead of lighting up in front of them it lights up the oncoming traffic.
i thought people just sourced projectors that were already rhdQuote:
Originally Posted by kazam
yeh but theres a much wider and cheaper range in the u.s. u can get american angel eyes at this xhange rate for around $200 aussie dollars, the closest thing on ebay (australia) is $300 and in the shops i've never seen it for cheaper than 300 either, and the shop ones are usually all the same, (chrome background with white halos)
where do you get it for around $200??? cause you said on ebay its around $300Quote:
Originally Posted by kazam
i meant ebay australia sorry.
http://cgi.ebay.com/ebaymotors/92-95...em350032698141
thats the first thing i came up with searching honda civic angeleyes and it comes up to just under 200 bux...
hey guys DO NOT BUY OF THE GUY IN NZ. He is not a good seller he sells dodgy stuff i bought the project lights for 360 but they arrived damaged he did not want to replace them. lucky i fabricated a the top bracket as it was snapped clean off. Not worth giving ur money to look elsewhere.
Need help working my the projectors! why don't the projectors work? should it work on high and low beam? coz one low beam my angel eyes light up, and on high beam only the inside globes work + angel eyes..projector light doesnt do sh!t..
need help asap..
the halo turns off and so does the projector when u turn on high beam.
on mine the both sets of halos work when i turn of parkies and low beam.
projectors at cyber century are going for 300, try bargin it down. btw don't let them rip you off.
i dont think those headlights comply with australian standards but damn americans! i want some of those!Quote:
Originally Posted by kazam
not sure about ur case but i bought 2 sets from him and so far were good packed and quick shipping.Quote:
Originally Posted by blabla
you are right, they dont thats y i said u need to angle them correctly so that they do.Quote:
Originally Posted by Stcmon
how should the projectors be set up?
parkies on = angel eyes
low beam on = angel eyes + projector?
high beam = high beam globe only?
my current setup is
parkies on = angel eyes
low beam on = angel eyes
high beam = high beam globe and angel eyes?
can anyone see a potential problem? why my setup downt work...wiring etc??
need help!!
whereabouts do u live? i can help but i'm gonna be carless for a week...if u don't mind coming around my place;)
pm me:)
parkies on = angel eyesQuote:
Originally Posted by kairi_k
low beam on = angel eyes + projector?
high beam = high beam globe only?
man the box had holes and shit in it there was two small pieces of foam protecting it. thats crazy!Quote:
Originally Posted by bankids
Hi All,
Are these all illegal?
My EG is worse for wear, and at night i have basically zero visibility. It's stock and the left headlight is aiming towards the far left and the right one aims at the floor.
So I was hoping for a decent HID setup. Nothing ricey.
Which kit do I want? I don't care too much about Angel eyes but if it comes in the kit (like the US Ebay Link) then why not.
Decent visibility and no police attention is big ones, then looks!
your better off just paying 170 bux and buying watever hid's u want from here, no point replacing your headlights if they dont need it, and another thing that us ebay link, is only for the angel eyes, you'll have to buy hid's or globes for that seperatly, so 200 for housing, then another 200 for lights plus like 50 for fitting, as oppose to maybe 200 all up for hid's... but yes they are both defective...
i've been using the angel eyes projectors for close to 3 years now and also combined with HID for the past 1.5 years, not a single problem with cops, the worst they did was looking at the lights, nothing else......
i done it with da black angels eye as well...but the projector is not working..bec it is not support..
i was gonna get the angel eyes from cyber century next time i come in i'll try bargain for 260 - 280 lol. they've got the plastic front. black back. wonder if the HID would burn out the plastic. Only thing i'm scared of if i plan to do a angel hid setup. Any ideas?
Thanks broQuote:
Originally Posted by kazam
So just any HID kit, and stay lower (4000?) so it doesn't attract cops. Then align it properly and I should be good?
Will it melt the stock housing?
whats with ppl hijacking my thread...there is another thread for general angel eye discussion...can someone try answer my question..
i have the one piece angel eyes (same as NZ seller on EBAY) and i want to know if they are capable of HID? des anyone have this set up? how many k's u running..4750k ideal
cheers
if you bought them from that nz seller then yes they are. otherwise no1 else can really tell u coz they are not ALL compatible with hid's u will have to ask the manufacturer
Well i bought the ones from the nz seller from ebay and on the lights it states not use the hid set up.Quote:
Originally Posted by kairi_k
wen i wanted to buy some i called the store up first to ask them and he said yes they are compatible with HID's and i messaged the people who had also purchased the same product from them and a majority of them where using HID's.... so maybe u should check with them again...
Just for the Melb. ppl here, Cyber Century actually has one piece projectors for $270. Better buy these instead of the hassle of converting the US ones. Better to pay a bit extra so you can return them if something's f'd instead of paying shipping to the US again (costs an arm and a leg).
can someone give me an advise whether i should get the Angel headlights or not. I'm planning to buy from this nz seller on ebay for $400. is it worth it? or where else i can get it cheaper. I'm from Brisbane by the way. Would you get angellights as well as HID installed? and would HID ruin the headlight covers to fade like my current ones? anyone have answers?
dude if uve got an eg civic i found this for you
http://cgi.ebay.com.au/92-93-95-HOND...QQcmdZViewItem
270$ all up
i think the one piece angel eyes can take h1 HID setup for the projector globe (ie. low beam) just not the halos. correct? should be seperate wiring though..
cheers
angel eyes cannot use HID..but ur low beam projector and high beam can be HID..
My civic is an EK1 (2000) not an EG. Does that means if i get the angel lights i cant install HID i with it? i gotta choose one or the other? which one do you guys prefer?
bro dont confuse evry1, wen people say angeleyes i THINK they are refferring to the whole setup, the rings or HALOS as they are more commonly reffered 2 as obviously could not run HID's because thats like running HID's through your parker lights, u cant do it lol. of course the bulbs blablabla yeh most angeleye setups can run HID's just have a look wen u buy em off ebay or watever if it says wether they can or they cant!Quote:
Originally Posted by kairi_k
s2_eternity_s2:
dude, just check ebay for EK eyes and c if they are HID compatible, it duznt mean coz u dont have n EG u cant run both hid and angeleyes. just check to see wether EK angeleyes are compatible
autojoy is sydney/parramatta has some.
lol. that would be funny... HID Halos!
you can have HID in any headlight you want. you just need the ballast to go with it, they usually sell them as a kit these days for about $100AUD you can get a kit.
can someone tell me when they hook up HID's to their Halos!? I want to see that!!! LOL!
i think sum casings may not allow them because of heat..
pls let me know when there's an HID kit for the angel eyes halos...i'll ditch my clear headlights and use angel eyes again;)
ey Syd..how's ur crystal headlights and ambers going? got pics?
cheers
they're good...using HIDs now, i still need to lower the passenger side light beam, a bit too high by 1cm...often shines to the inside of the car in front lol...
here's a pic took last week:)
http://i101.photobucket.com/albums/m...1192edited.jpg
pic with them ON please
haven't taken them with lights on, as i said, have to lower the passenger side light beam a bit more...will try to take quick pic soon:)