coilovers for a dc2

hey guys.... as some of u know i just got my car.... so i've been driving around for about a week or so now... just the left rear passenger side coilover seems to be bottoming out alot and scraping alot more then when i 1st got it....

was wondering worst case senario that it needs to be rebuilt.. would it be worth fixing it or look at other coilovers for the car???

and wat brands are there for dc2 tegs ... i want it to be low... as my car is low now.. dont want to get new coilovers and be sitting 4wd... :P

Will

Do they have to be coilovers? Is there a particular reason? How about a properly matched damper/spring package?
Wat application are you needing this suspension for?
There are plenty of coilover/packages out there, just do a little reading. What have you got atm? Getting a imported brand rebuilt might prove to be a costly venture.

On a side note, I have a Tein adjustable height/damper package that might be coming off my Integra if there is sufficient interest.

fair enough.... the car is going to get checked out to see if the coilover is screwed... only reason i want coilovers is i like the ride and hard damper settings.... and i can just wind the things up when i get defected... as i would have it low as possible...

i'll see wat happens after it gets checked out...

Will

Check if the coilover have leakage, and check the height setting of both Front shock, if they are in the same height setting but one of the side have +-10mm difference than the other one, you may need to get a new coilover, don't think of rebuilt if you have JDM coilovers, it costs you alot and if you don't go on track much, coilover is a waste and it's hurting the car chassis

Anyway, what's the spring rate of your car and what's the height settings? I could give you some factory ref data if you need it

and when u say ur getting it checked please dont go to pedders

wat's wrong with pedders? they're NO BULL! :p

LOL.......... nuh it's ok i aint going to pedders..... i'm going to take the car to get checked out this w/end to have a look to see if the coilover is gone or if it's fixable... but will keep updated....

Will

Best thing to do is but ITR Rear Control Arms.. and then get a Jap set of Coilovers like TEIN or similar.. for DC2R

Quote:

---

Originally Posted by JSL

Best thing to do is but ITR Rear Control Arms.. and then get a Jap set of Coilovers like TEIN or similar.. for DC2R

---

Like mine... :p
Quality...you won't be disappointed.

You don't need to change the rear control arm for DC2R right? I though it's the "bushes" style instead of the vti-r "Fork" style anyway

and i personally don't like Tein that much, unless you have RA or RE, but please change the spring as well cos Tein springs are heavy as hell, I like Swift Springs but a bit pricey

You may also consider D2 RR-pro(forgot the name), and Zeal B6

Quote:

---

Originally Posted by spoondc2

You don't need to change the rear control arm for DC2R right? I though it's the "bushes" style instead of the vti-r "Fork" style anyway

and i personally don't like Tein that much, unless you have RA or RE, but please change the spring as well cos Tein springs are heavy as hell, I like Swift Springs but a bit pricey

You may also consider D2 RR-pro(forgot the name), and Zeal B6

---

lol...ok...

hipermax hks.,.. or splurge on a set of ohlins.... if you have the $$$ the possiblilities are endless

like everyone said..it depends on personal taste...i had teins on my car before..sweet as ride...some other people say bilstein or koni os better...depwnds on taste and budget...i think a reason the coilovers are stuffed up is because of harsh australian roads...ideally coilovers are made for track which is smooth.

i had a look 2nite to see wat kinda coilovers are in there... they are "fulcrum" coilovers... i've heard of them b4.. but anyone know if they are any good??

Will

Quote:

---

Originally Posted by CL455

i had a look 2nite to see wat kinda coilovers are in there... they are "fulcrum" coilovers... i've heard of them b4.. but anyone know if they are any good??

Will

---

local manufacturer..
IMO OEM sussy is better than this

kinda gotta agree with tangie, fulcrum arent very good

fair enough... heard of them... but didn't know of many ppl having them... i guess now i know why!! :P hehe

well i had a look and didn't see any leaks or anything.. i think it could just be that the car is to low.. :P

Try Tein RA coilover,really good ,got 1 set on my car,amazing in corner