Printable View
My front passenger door rattles when you open/close it and generally all the time when driving. Add in the fact that the central locking on that door doesn't work and friends recently slamming the door way hard, I'm pretty sure it's all connected :thumbdwn:
Anyway, I'm not sure on how to take the door apart so if you guys can tell me how or link me to a guide, I'd much appreciate it :)
remove screw in the arm rest pocket
remove screw behind the door lever bracket
remove both them slowly pry the trim until the trim clips snap out
be careful around the top outer edge as sometimes where the bottom piece and top piece of the door trim will crack, you'll understand when you take a look at it
ok, thanks for that :thumbsup:
http://www.ozhonda.com/forum/showthread.php?t=89589
first part of that
sweet, thanks for that as well
any insight on the central locking funworld? mine doesnt work for the passenger side also
mine doesnt work on either. it just makes the noise. i also have vti
the rods for the lock may be loose
was the case with mine back a while ago, you can adjust it a bit
mine doesnt even make a noise lolQuote:
Originally Posted by hisoka
Hmm, I could only find one screw - http://i233.photobucket.com/albums/e...Photo-0078.jpg
This is what my door looks like [ http://i233.photobucket.com/albums/e...Photo-0077.jpg ] where would the other screws be?
oh sedan *forehead slap*
someone whose taken off a door trim off a sedan's going to have to chime in here
theres probably a few behind the speaker grille too
haha true np!
how would the speaker grill come off? i tried fiddling around with it before but failed
Use small flat head screw driver to pry the speaker grille off (there are small gap like this [ ) there are 3 screws for the speaker and another 3 crews for the panel behind the speaker. There are another 2 screws at 2 ends of door grip behind the door grip cover, use big flat head screw driver to push the clip on the door grip cover (in front of door grip, near the power window switch) and pry it off. Remove all the screws, then just pull the panel off
^^ pretty much its not hard at all once you find hte screws just dont get the sticky shit all over you thats inside the door :P. I need to do this one day my driver door does not unlock all the time and it rattles too
spot on... worked like a treat :)Quote:
Originally Posted by vinnY
^ my method's for hatch only though, appears sedan's are different :)
Both of my doors rattle as well, (after I put on my suspension)...
actually my friend's one does that too....
any idea which part is loose?
Not too sure, tbh. I'm pretty busy so haven't gotten round to getting it off. I'll let you know once I find out.
take the door trim off, and go for a drive, or listen to the stereo, whatever one you think is making the noise
it my be the dorr handle rods rattiling on the frame, if so, put some foam between them etc
its usually the rods that are rattling. i fixed mine up once before and atm its not noticeable but my drive side doesnt even unlock properly! just cant seem to get it right.
when you say it rattles? do you mean like grunting sound or something? its happening to my car too.
It's like a something-hitting-metal sound; as if something loose inside the door is hitting against the sides
a grunt isnt a rattle
a rattle is like the noise a rattle can makes, from the metal ball hitting the metal can