Honda Integra Wont Start, just keeps cranking

Hey Everyone!

The problem:
i was driving the other morning to work and the car stalled on me on the freeway. now the car just cranks and doesn't 'turn over to drive'.
I was driving a Honda Integra GSI 1997 model.

i searched all over Google and OzHonda did what I've found and still nothing. was wondering how i could diagnose more to find the problem.

what i have done so far:
-put key in ignition, i hear the fuel pump priming. that (whining sound) that goes for 3 seconds.
-checked the main relay, all the joints seem okay, i've just soldered afew today and still nothing, will solder all when i get more light lol
-checked the fuses under the dash, all fuses seem okay, but will check again to make sure.

Hoping to check:
-Hopefully i will check to see if the engine is getting fuel from the fuel filter and
-check the spark plugs (but not quite sure how to go about it)
and looking into the distributor and ignition switch.

Anything else i could do?

Regards,
OJ

You didnt search hard enough.

Common problem is the coil inside the dizzy has gone - simple and easy fix. How many KM on your GSI?

Also please remove the advertising in your signature. It is not allowed.

Quote:

---

Originally Posted by infurNOS

You didnt search hard enough.

Common problem is the coil inside the dizzy has gone - simple and easy fix. How many KM on your GSI?

Also please remove the advertising in your signature. It is not allowed.

---

On the GSI has about 240k km's.
Dizzy as in distributor yeh?

90% sure it is the coil inside the dizzy.
I have a spare working one, PM me if you want it.

Quote:

---

Originally Posted by Skyline_034

On the GSI has about 240k km's.
Dizzy as in distributor yeh?

---

That is correct, mine went at approx the same KM! Would crank and crank and crank, just no spark. A lot of people replace the entire distributor ($$$$$) but it is not needed, mechanic job for the coil is not very expensive. There is a DIY available if you want to tackle it yourself.

Hope it gets resolved asap for ya

Quote:

---

Originally Posted by MassiEk4

90% sure it is the coil inside the dizzy.
I have a spare working one, PM me if you want it.

---

thanks! ill let you know

Quote:

---

Originally Posted by infurNOS

That is correct, mine went at approx the same KM! Would crank and crank and crank, just no spark. A lot of people replace the entire distributor ($$$$$) but it is not needed, mechanic job for the coil is not very expensive. There is a DIY available if you want to tackle it yourself.

Hope it gets resolved asap for ya

---

errr.. annoying. thats pretty much what's happening haha, crank crank crank and nothing.
ill test it out tomorrow hopefully.
this the DIY http://www.ozhonda.com/forum/showthr...-Lots-of-Pics!

Quote:

---

Originally Posted by Skyline_034

thanks! ill let you know



errr.. annoying. thats pretty much what's happening haha, crank crank crank and nothing.
ill test it out tomorrow hopefully.
this the DIY http://www.ozhonda.com/forum/showthr...-Lots-of-Pics!

---

Yeap - that's the one. You will not have any spark when you test tomorrow.

Happened to me as well. It was the Coil in the Dizzy like mentioned.

I bought my replacement from Repco for $38, it was a generic brand, Plenty in stock because it was compatible with a lot of other Honda's (CRV, Civics, Integra DC4/2/R etc etc). It was a piece of cake to Install.

thanks everyone for your help!

it was the coil inside the distributor!
while trying to take off the rotor, it for some reason fell off (didn't knock it or anything...strange) so had to get a rotor + coil from repco.
very simple fix :D

thanks again everyone!

cheers OJ!

your problem was the rotor, if it was loose and you did not break it.

it sheered off, usually due to high temps in the dizzy from the bearing getting hot, possibly failing

Glad to see it was resolved. Thread closed.