Quote:
I run p/s with my QSD h2b. I use a toyota MR2 electric pump. The pump is mounted using an installation kit from Karcepts. The kit bolts where the transmission side torque mount was. The system, alough noisy, functions just as good if not better than the oem belt driven system. I use the oem p/s rack, the supplied high pressure hose from karcepts, and the oem resevoir.
To use a prelude pump, you would have to cut out a large portion of the framerail and headlight housing. The electric setup is cut-free
__________________
Quote:
Yes you can run a/c. You are going to have to make custom a/c lines to fit. Because of the change in angle of the motor. You can go down to your local a/c shop to have them make them for you. Now your p/s is a different story. You are going to have to hack up your headlight and frame rail. just to get to fit and I don't mean alittle bit of hacking either.The f20b has the bolt holes to hook up p/s. It's the same cast as the h22.
The innovative a/c bracket works like a champ too. I had a/c in mine for a couple of months. I took it back out for winter and because I needed a new dryer and compressor. p/s is to much of a hack job for me to do. Just put in a manual rack.