Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Aim: To Tuck the Winderscreen washer bottle in the gen 3 integra and make it looks more neat.
Required:
10mm socket and wrench
washer bottle from 98 spec jdm ITR
gromet ( which i got from the firewall of my other integra)
Step 1
First that off your front bumper,
refer to this if you dont know how to take it off
front bumper removal
Step 2
Locate the washer bottle on the passenger side of the car
and remove the old washer bottle out. And install the new washer bottle.
http://s10.postimg.org/9k290aiq1/image.jpg
Step 3
98 spec vs 96 spec
Notice how the 98 spec hose is bendable, it can also be detached.
So once u fill it with water detach the hose.
http://img510.imageshack.us/img510/7874/dsc01239cfa.jpg
Step 4
Plug the hole on top of the washer bottle with the grommet from the fire
wall. Surprisingly it fits pretty well :p . It can also be used for the rear wiper
delete if you want to get rid of yours
http://s18.postimg.org/71efwvyc9/image.jpg
And the finish product should look like this
http://s8.postimg.org/7512voqx1/image.jpg
C&C welcome :thumbsup:
I know the rest of my engine bay looks messy.. ill get to that next time ;)
