I only knew of Hondata and they apparently don't work on Australian ECUs.
What other ECU tuners do work? (including piggybacks)
What benefits have you received or know of?
How much for the tuner + tuning?
Printable View
I only knew of Hondata and they apparently don't work on Australian ECUs.
What other ECU tuners do work? (including piggybacks)
What benefits have you received or know of?
How much for the tuner + tuning?
Unless you have alot of disposable income, i wouldn't really bother.
The R18 engine is an economical engine so it doesn't output much power and you wont get much out of a hondata remap
If you do have disposable income you could get the R18 to output 220HP and 230lb.ft of torque @ 8PSI of turbo boost.
Only real way to get power out of these engines is to turbo it.
Now say hello to the Tangerine Terror
www.youtube.com/watch?v=B6YKCMr_pEg
The car in the video is NOT a FN2(Type R) but a FN1.
The FN1 is a 3 door hatch with the R18 engine.
This cost above £1000 or $1700
More info here
http://www.civinfo.com/forum/tdi-nor...-post-1-a.html
Yeah. Not worth it.
You would have to spend atleast $3,500 before seeing anything noticeable.
Intake
Exhaust
Headers
Computer+Tune
Even with all that you will probably only get 20-30kw
greyfox is right. the engine's quite well designed for midrange torque i find. Nice enough drive to as it is.
wheres stevil when you need him
he'll hook you up at byp
What about piggyback ECUs? (e.g., HKS FCon)
piggybacks are relatively inexpensive but are limited in what they can do - i.e. AFR only.
what does the chipboard and harness look like?
I might be able to do something depending on the type of ecu used.
picture of the whole board would be a start.
and the pin out.
Save ya cash, the R18A is tuned very well from the factory so you ll get bugga all gains
When the Aus $ was higher then you could land a complete TSI kit including hondata flashpro and larger RDX injectors for less than $3K. An USDM ecu is also need, pins need to be pulled for the ecu to work with our Audm cars and I know only 1 tuner with the skills B-)
Been testing rims in the last 24 hrs and I'm thinking of going upto 17x9.5 all round with 255s upfront and 235s in the rear, 265s are also on the short list for the front. B-)