Originally Posted by
Richard B
Creaking clutch in a CU2 is so common that it has its own thread on this forum. But seeing you didn't say you changed your master cylinder, the pressure at the end of your push rod (between pedal and master cyl) has changed and needs lubrication. Buy a can of spray lithium grease, or perhaps a PTFE / teflon spray, and use the long nozzle to spray into the rubber cap that the push rod disappears into, as deep as you can manage.
The push rod basically feeds sound vibration back into the clutch pedal mount, which acts as a mechanical resonator, producing the characteristic squeal.
The collective terminology in this post reads like a badly written porno..