Service Accord Euro CL9 [Part #1] oil filter and oil change

Printable View

06-04-2013, 07:44 PM
Snoop_gee

Service Accord Euro CL9 [Part #1] oil filter and oil change
Changing the oil filter, engine oil on a Honda Accord Euro
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!

Aim: To be able to service your own Honda Accord Euro reducing the costs instead of spending it on mechanics and or dealerships.

Required:
- Floor Jack
- 4x Car stands
- Oil Filter wrench not cheaper ones
- Oil Pan
- 17mm socket - engine sump bolt
- Oil filter
- Honda OEM oil
- Funnel
Steps:
Drive it to flat surface ..
http://i1049.photobucket.com/albums/...e/DSC02903.jpg

lets have a look what are some of items we are planning on using for the servicing remembering safety is the ABSOULTE IMPORTANT thing more than anything. I have heard some people say put the wheel flat on its side etc. under the car But car standards is must i believe.
Grey items - car stand
Red item - car floor jack
http://i1049.photobucket.com/albums/...e/DSC02907.jpg

http://i1049.photobucket.com/albums/...e/DSC02905.jpg

The oil filter is garbage i ended up having to use my friends oil filter wrench instead. The only positive using this would be the oil pan and funnel.

http://i1049.photobucket.com/albums/...e/DSC02906.jpg

using the floor jack get the back up on this metal part.

http://i1049.photobucket.com/albums/...e/DSC02908.jpg

http://i1049.photobucket.com/albums/...e/DSC02910.jpg

http://i1049.photobucket.com/albums/...e/DSC02909.jpg

Below the front side fog light looking underneath the car is a metal part i used to jack it up from
http://i1049.photobucket.com/albums/...e/DSC02913.jpg

Because my car is lowered to a point where the floor jack doesnt fit under the front i had to use the Honda OEM jack that you find in the boot.
To lift the front high enough to get the floor jack under it.

http://i1049.photobucket.com/albums/...e/DSC02914.jpg

http://i1049.photobucket.com/albums/...e/DSC02916.jpg

Now that the Cl9 is completely off the ground and secured on the jack stands its time to take the plastic cover undearneath the car.

http://i1049.photobucket.com/albums/...e/DSC02919.jpg

http://i1049.photobucket.com/albums/...e/DSC02917.jpg

http://i1049.photobucket.com/albums/...e/DSC02918.jpg

http://i1049.photobucket.com/albums/...e/DSC02912.jpg

http://i1049.photobucket.com/albums/...e/DSC02911.jpg

Honda is so smart.. love how they have this small plastic panel on the plastic undertray. Take this off with a 10mm socket.
http://i1049.photobucket.com/albums/...e/DSC02922.jpg

You can then see the oil drain bolt the size of this is 17mm.
http://i1049.photobucket.com/albums/...e/DSC02923.jpg

http://i1049.photobucket.com/albums/...e/DSC02924.jpg

After loosing the oil sump drain bolt get that oil pan ready last thing you need is oil all over the garage floor.
http://i1049.photobucket.com/albums/...e/DSC02929.jpg

http://i1049.photobucket.com/albums/...e/DSC02930.jpg

http://i1049.photobucket.com/albums/...e/DSC02931.jpg

http://i1049.photobucket.com/albums/...e/DSC02932.jpg

http://i1049.photobucket.com/albums/...e/DSC02934.jpg
06-04-2013, 07:46 PM
Snoop_gee

http://i1049.photobucket.com/albums/...e/DSC02936.jpg

Oil going into the oil pan

http://i1049.photobucket.com/albums/...e/DSC02935.jpg

Engine oil appears to be completely drained out only a few drips left.

http://i1049.photobucket.com/albums/...e/DSC02937.jpg

lets have a look at the oils that will be used
http://i1049.photobucket.com/albums/...e/DSC03074.jpg

http://i1049.photobucket.com/albums/...e/DSC03076.jpg

http://i1049.photobucket.com/albums/...e/DSC03075.jpg

This is what i meant between a decent oil filter wrench for some reason the one i had doesnt grip on the oil filter and would slip and spin around it instead of latching on solid.

http://i1049.photobucket.com/albums/...e/DSC03106.jpg

http://i1049.photobucket.com/albums/.../DSC03106a.jpg

http://i1049.photobucket.com/albums/...e/DSC03107.jpg

With the oil filter now off. Old vs New.

http://i1049.photobucket.com/albums/...e/DSC03079.jpg

Oil Filter
http://i1049.photobucket.com/albums/...e/DSC03080.jpg
New filter
http://i1049.photobucket.com/albums/...e/DSC03081.jpg

Before putting the oil filter back on put the engine.
put a bit of oil on the rubber ring seal
http://i1049.photobucket.com/albums/...DSC03082-1.jpg

With the New! oil filter back on. Time to add fresh new oil .
http://i1049.photobucket.com/albums/...e/DSC03084.jpg

http://i1049.photobucket.com/albums/...e/DSC03085.jpg
06-04-2013, 07:46 PM
EKVTIR-T

nice work and detail
06-04-2013, 07:48 PM
curtis265

nice detail and work
06-04-2013, 07:53 PM
mocchi

how to change oil & filter? amazing revelations

http://i.imgur.com/UmpOi.gif

keep up the good work pointy elbow
06-04-2013, 08:05 PM
Vvvtec

Where do i put the used oil?

Nice diy mate is that a K20 crx i see in the background?
06-04-2013, 09:42 PM
Snoop_gee

Quote:

Originally Posted by EKVTIR-T

nice work and detail

Quote:

Originally Posted by curtis265

nice detail and work

Quote:

Originally Posted by mocchi

how to change oil & filter? amazing revelations

http://i.imgur.com/UmpOi.gif

keep up the good work pointy elbow

Thnx guys
:cool::D

Quote:

Originally Posted by Vvvtec

Where do i put the used oil?

Nice diy mate is that a K20 crx i see in the background?

As for used oil i disposed it at my local used oil facility.
I found the following website very useful http://recyclingnearyou.com.au/motor-oil/

Nah there is no k20 CRX in this garage. Atm its out of my sight and out of my mind. :(
06-04-2013, 10:09 PM
mrgu

Nice work!! Love the pics. Very detailed
07-04-2013, 11:28 AM
Jiblet

I would also add in a couple of things:
- once old oil is fully drained out of sump plug, add some fresh oil to engine until the oil coming out of the sump is totally fresh (flushing all of the old oil out).
- oil to be put on new filter is fresh oil, not used.
07-04-2013, 01:35 PM
Fredoops

You must spread some Reputation around before giving it to Snoop_gee again.

also>

Honda FEO engine oil
ewwwww
07-04-2013, 01:40 PM
integraR

can you do one for a crx
07-04-2013, 02:20 PM
power_of_dreams

How much oil to put in?

Nice write-up
07-04-2013, 02:37 PM
Jiblet

Quote:

Originally Posted by power_of_dreams

How much oil to put in?

Nice write-up

About 4.5L (that is with the oil filter change). Less oil if you don't change the filter (about 4L i think).
13-06-2013, 05:45 PM
ouch

dont know about you guys, but when i take the dipstick out it doesnt give me a solid reading of engine oil level. its all rubbed all over the place, instead of a clean marking on the dipstick. does anyone else get this? is it the way i take the dipstick out? ive only ever encountered this on K series too...
18-07-2013, 07:42 PM
brokenback

Just let the engine oil drain back to the sump for a few minutes....~10 mins. Then take out the dip stick, wipe it re-insert it and read check level on it.
22-03-2016, 04:39 PM
CL9_euro

Great write up! Will definitely be referring back to this post when i service my CL9.
By the way, is the oil filter code Z547(ryco)?