DIY RETRIM professionally. ^^,
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Hi all, well this isnt the first time ive retrimed my car so here it is,
just to help you guys out
firstly i trimed my interior white back then because i was very into show cars,
then it became to dirty looks awsome tho.
neways heres how it looked before;
http://img184.imageshack.us/img184/1691/img2010hc2.jpg
http://img262.imageshack.us/img262/589/dsc00001gg6.jpg
then it started dirty & i could never be bothered to clean it -__-"
http://img412.imageshack.us/img412/2303/dsc00002rb5.jpg
Firstly, cut a big piece of material out, to suit your trim, some people trace there old trim etc, to be honest thats just a waste of time,
just cut a hole in the middle and anywhere else that has an opening.
slowly apply the contact bond adhesive glue and spread it around the insides of the door first, then slowly flow it outwards.
http://img412.imageshack.us/img412/96/dsc00003gr3.jpg
flow the material into the crease's, if you find that you get a bubble use the hair dryers / heat gun to heat it up then slowly strech it out until the shape forms.
http://img262.imageshack.us/img262/4022/dsc00004ux7.jpg
By now you should be up to the corners, use the hair dryer / heat gun to heat it up and slowly stretch around corners and cut slits where needed.
http://img510.imageshack.us/img510/2530/dsc00007ss2.jpg
use your superglue or contact bont to stick down the rest of the trim from the back. remember to pull and strech the material or it will lift after a amount of time.
http://img249.imageshack.us/img249/8154/dsc00005nh5.jpg
With the repeated steps, ive done the Arm rest, my two pillars and my glove box.
http://img510.imageshack.us/img510/3296/dsc00006fn6.jpg
Final result;
http://img257.imageshack.us/img257/4619/dsc00002vt0.jpg
Sorry for the undetailed trimming lesson, im serzly very lazy to type more then this atm..
Wynode Edit: Added disclaimer