not 100% sure on the centre bore size but the mini cooper rotors centre bore is the same.
Printable View
great information so grifty
would be great dies to size rda or dba disc rotor to double check it and screen shot each disc rotor
look forward to more update
I'll do some research myself too interest in this option too
fuark nice grify. +1 bbc penetration
btw FS: BNIB mini rotors $120
http://www.ozhonda.com/forum/customa...ar15495_15.gif
Good stuff mate :thumbsup:
Used this setup on my daily/track car for two years without issues, Mini Rotors work really well; like OEM.
Also using this setup on my current build, got my mini rotors from the States for $80 delievered. :D
Gonna head down this road in the next few days, I have to ask though, did you have to modify your lines in any way? Or it did it fit right up?
Yep as long as the have the same caliper code that I posted in the original post. Would most likely be a BB4 or BB6.
Repped. Good thread.
Thanks grofto
How do they go clearing rims? Do they clear most 15" setups. IE Fat Fives, EM1's? Aftermarkets?
No Idea, but this setup would be the same as any other 282mm.
From my research they fit under Fat fives, don't know about the EM1's though.
One thing I have found, that should probably be noted, is the difference in models. I have to get mine ordered in, and they asked if it was R50 or R56. R50 is fine (2004-2007 iirc, 4x100, 280mm, 56.1mm cb, although be careful, this varies wildly), but some of the R56, even the non-S models, showed a 292mm rotor and different centre bore. Just a heads up, not sure if it's valid, but this is what I was told when ordering the rotors, so yeah be careful, some people don't know what a model number is...