Diy - spoon duckbill lifter (spacer)
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Aim: Lift the Duckbill up to get an agressive look
Difficulty: Not very
Required:
-Socket set
-Rubber Door stoppers x2 $0.80cents each or something
-45mm Bolt with M6 Thread $2.50
All can be bought from bunnings for under $5
Depending on how much you want to lift the spoiler, there are different sizes in door stoppers, i went with a 35mm one which will lift it 35mm.
Bolt size depends on the spacer size, it should be at-lease half a cm longer to get it into the thread of the spoiler.
http://t0.gstatic.com/images?q=tbn:A...blGmLlqB255NeA doorstop (spacer) they come with a hole already no drilling needed.
http://www.scooterwest.com/file/000/...jpg?1303943497
Only space the 2 rear bolts, you can also get the door stoppers in different colors.
It should come out something like this:
https://fbcdn-sphotos-a.akamaihd.net...34691323_n.jpg
Thanks for having a read.