My ED/EF Cable to Hydro Clutch Conversion

Quote:

---

Originally Posted by grifty

You can get a line made by Hel locally for $69 + postage, built to your specs.

http://www.helperformance.com.au/build-your-own/

you'd probably have to email them about the inverted flare tho as I dont see any listings online for it.

---

Nice find mate, that is pretty damn good

Quote:

---

Originally Posted by markismaximus

Cheers, yeah there is obviously only so many RHD EFs still in existence.
LHD version would be cool, but near impossible to design without an actual car for the R&D. I also think it would be a lot harder to fit, because the CMC would be squashed between the firewall and the strut tower on LHD car

---

put it out there

im sure there would definitely be interested people in the states, maybe they'll sponsor you, never know!

Anyone have pics of the kit installed? How it looks in the engine bay and under the dash?

Quote:

---

Originally Posted by markismaximus

6 kits allocated to following users:

1. blags (shipped)
2. dannymlad (shipped)
3. henrygiang (picked up)
4. Hialeahzbg (shipped)
5. Hialeahzbg (shipped)
6. B18CR-X Mike
7. nighthawkblack

---

Update to list.

Can't wait! Thanks again! Do you have any photos installed?

Hey mark I have a question.. Do we have to use the s2k cmc or blox? Would a wilwood cmc work? Reason I ask if because I already have a wilwood brake master cylinder and the s2k/blox one would look completely different style..

Quote:

---

Originally Posted by Hialeahzbg

Hey mark I have a question.. Do we have to use the s2k cmc or blox? Would a wilwood cmc work? Reason I ask if because I already have a wilwood brake master cylinder and the s2k/blox one would look completely different style..

---

The Blox CMC is a just an aftermarket replacement for the OEM part, so yes it will also work.

A Wilwood CMC won't work, if you have a look at them the bolt pattern is completely different and won't interface with the machined spacers.

Cheers

Quote:

---

Originally Posted by markismaximus

6 kits allocated to following users:

1. blags (shipped)
2. dannymlad (shipped)
3. henrygiang (picked up)
4. Hialeahzbg (shipped)
5. Hialeahzbg (shipped)
6. B18CR-X Mike
7. nighthawkblack
8. Vi

---

Update to list.

Hey mark quick question.. Do I have the cut the bracket on the inside to install the pedal? I see a piece getting in the way of the golden bracket you sent me.. I don't see instructions

Quote:

---

Originally Posted by Hialeahzbg

Hey mark quick question.. Do I have the cut the bracket on the inside to install the pedal? I see a piece getting in the way of the golden bracket you sent me.. I don't see instructions

---

Hey Hialeahzbg, I emailed the instructions to Andre a few weeks ago. If he hasn't provided them to you PM me your email and I'll send through a PDF.

Are you referring to the small hanger that the heater box bolts to? If you are, then yes, you need to trim a very small portion off the bottom (probably around 10mm). This is included in the instructions at Step 8.

Cheers,
Mark

Update to list, all gone!

1. blags (shipped)
2. dannymlad (shipped)
3. henrygiang (picked up)
4. Hialeahzbg (shipped)
5. Hialeahzbg (shipped)
6. B18CR-X Mike (shipped)
7. nighthawkblack (shipped)
8. Vi (picked up)
9. Nonterraquous (shipped)
10. RVD (shipped)

Hey man,
Are these going to become available again in the future? Or is it a special order only type thing?