As the title says,
Apart from cutting the bonnet frame support,
has anyone done this and does the PS Pulley/Body clear the OEM bonnet?
Engine: K24
Chassis: EM1/EK
what has people done to rectify the clearance issues? smaller pulley? cutting frame? etc etc?
any ideas or someone has this working in their car?
thanks.
if its only a few mm, lift the bonnet up with a few washers
Hammer?
Lol.. Def do the trickQuote:
Originally Posted by Oxer
U sure this is wit the k24?? Mayb k20 but i think 24 has a higher block...Quote:
Originally Posted by Riced_Civic
just cutabit of the webbing* out if you have to.
*dunno what its called
Its called bonnet support frame i believe.. And not spider web.. Lol hehe :pQuote:
Originally Posted by u mad?
Yeh some cutting is required even with a k20 ... (my mate has told me)
But what i wanna knw if k24 will clear it or how much fabrication is required or what retro parts, fittings can be done.
not sure, it was just a suggestion. if it was a few mm, using the washers is just an easier way than doing any cutting to the bonnet.
if a 24 block does sit higher than a few mm and you want to keep ur OEM bonnet u may be forced to cut the bonnet webbing.
Yeh.. Looks like from the net that most ppl are cutting the frame.. Which is fine to me,Quote:
Originally Posted by Riced_Civic
But others are saying that even cuttng it will hit the actual bonnet surface alredy..
I need a better clarfication frm someone who has done this etc etc
http://www.k20a.org/forum/showthread.php?t=28179
seems to work
Thanks dudeQuote:
Originally Posted by tripleuse
Ive read this, but this is for a k20 engine and not the k24.
I need examples of k24 engine wth the PS in an ek.
oh sorry i thought they were both the same height. good luck man.