XFORCE Exhaust for Civic – EG/EK

Cat-Back System (EG) Model: EG Hatch Back and Sedan

Designs:

1) Cannon Rear Muffler: 60mm pipe diameter; Maximum Power; Racing Sound

http://i762.photobucket.com/albums/x...ket/civic1.png

2) Twin Loop Rear Muffler: 60mm pipe diameter; Maximum Power; Lower Sound output than Cannon muffler; No obvious exhaust noise from cabin on low and mid rpm; Quicker throttle response

http://i762.photobucket.com/albums/x...ket/civic2.png


Cat-Back System (EK) Model: EG Hatch Back and Sedan

Designs:

1) Cannon Rear Muffler: 60mm pipe diameter; Maximum Power; Racing Sound

http://i762.photobucket.com/albums/x...ket/civic3.png

2) Twin Loop Rear Muffler: 60mm pipe diameter; Maximum Power; Lower Sound output than Cannon muffler; No obvious exhaust noise from cabin on low and mid rpm; Quicker throttle response

http://i762.photobucket.com/albums/x...ket/civic4.png

Header (EG/EK B16) Model: EG-EK B16 engine

Designs:

1) 4-2-1: 38mm-42mm-60mm; increase median power, improved drivability

http://i762.photobucket.com/albums/x...ket/civic5.png

http://i762.photobucket.com/albums/x...ket/civic6.png


2) 4-1: 42mm-63mm; Maximize top end power output


Header (EG/EK D15/D16) Model: EG-EK B16 engine

Designs:

1) 4-2-1: 38mm-42mm-60mm; increase median power, improved drivability

http://i762.photobucket.com/albums/x...ket/civic7.png

http://i762.photobucket.com/albums/x...ket/civic8.png

2) 4-1: 42mm-63mm; Maximize top end power output.


Hi-Flow Cat Options:

1) Hi-flow honey comb ceramic substrate, 550cfm+ (600hps+);

2) Hi-flow metallic substrate: 700cfm+ (800hps+), long durability


For pricing or other inquiries please send us a PM or contact us directly at the following:


Tel: 02 9793 7338

Fax: 02 9793 3238

Email: inquiry@xforce.com.au

Website: www.xforce.com.au

(Please specify your location for quicker responses re pricing and dealers)

Price on EK Twin Loop System?

Price for twin loop 3inch inlet muffler only. Thanks

price for 4-1 header for d16 please, located in sydney

Quote:

---

Originally Posted by BIGTYM

Price on EK Twin Loop System?

---

The RRP for the Twin Loop Cat Back System (Stainless Steel) is $750.00

For the actual price and supply please contact your local dealers. You can locate your nearest dealer here: http://xforce.com.au/where-to-buy

Quote:

---

Originally Posted by 2MPRS

price for 4-1 header for d16 please, located in sydney

---

Hi 2MPRS,

RRP is as follows:

Headers (Stainless Steel) $ 480.00
Headers (Mild Steel) $300.00

For the actual price and supply please contact your local dealers. You can locate your nearest dealer here: http://xforce.com.au/where-to-buy