Printable View
Hey guys,
I been looking for a clutch kit and flywheel for D16A8 (D-Series DOHC non-vtec).
Most of the ones I find are D-series SOHC that varies for both D15-D16's
Are they any SOHC Clutch Kits and flywheels Interchangeable with DOHC D-Series?
Thanks guys :D
Pretty sure no.
For D16A8 DOHC non-VTEC
- HCK-6461 - Exedy OEM replacement
- HCK-6461HD - Exedy Heavy Duty
How bout Exhaust Header? Its hard to find a DOHC one aswell for d16a8.. will SOHC fits the D16a8? or a lil fabrication or just wont fit at all?
I am using sohc Header N*power 4-2-1
That is the same clutch and flywheel ED civics use. which is SOHCQuote:
Originally Posted by dougie_504
Really? What is your SOHC D-Series Engine? Carby or Efi?Quote:
Originally Posted by markismaximus
SOHC header ey.. Direct Fit..swap and bolt to stock exhaust?? or a bit of mod/fabrication to be done? direct fit swap and bolt to stock exhaust?Quote:
Originally Posted by hmetro24
WIth D16a8 clutch replace they are the same a SOHC D15/16
before you buy clutch kit try remove the gear box to work out if you have
-200mm or 212mm clutch disc
-20 or 21 spline gearbox input shaft
By cause a bit of down time wait for clutch to copming in but save money and time if you get the wrong one
pat
Quote:
Originally Posted by hectic_filo
Yeh D16 SOHC do fit with minor mod reqd to the stud pattern reqd to allow correct alignment of ports and match ports on headers to head ports
Can do this with D16a8 exhaust gasket line up on the D16 SOHC headers
I have EFI D16Y1 in my ED (swapped of course), but still the original ED gearbox, flywheel and HD clutch.Quote:
Originally Posted by hectic_filo
Go onto the exedy clutch website. They have part numbers etc for different cars