DIY : CHECK ECU for j00 !

the connector with black/brown wire? isnt that ground wire or something?

does it have a blue connector, is it located on the LHF kick pannel ?

yea, behind the carpet is the ecu then theres a green double plug unit.
in it has two little blue plug units
first blue unit has 2 wires brown/black
second blue unit has 3 wires which u told me not to touch

yep then the two pin connector is the one you want

Hey guy was wondering just did the test and there were two lights flashing, the abs light and the engine light. do you know what is wrong when the asb light flashes? and also which is the oxegen sensor #1? because thats the only problem it indicates with the engine light. thanks

audm Hondas only have 1 o2 sensor, unless you got a 88-91 prelude, or a V6.
ABS could be anything, how many flashes did you get for tyhe ABS

I got a few codes for the abs they were like 18, and a few other numbers in the 60s and 70s
and also which 02 sensor are you talking about? the exhaust or the air intake sensor?

i got the codes 6,12,20,22

:D

i dunno wats wrong.. but hey!
Keny

Quote:

---

Originally Posted by Spoon-Accord

i got the codes 6,12,20,22

:D

i dunno wats wrong.. but hey!
Keny

---

with ur current ECU....wait for ECU MAN to reply or get onto HT or similar , and see what those apply for accord ECU :)

ahh okay.. ECU-MAN.. i know ur lerking around somewhere

Kenny

6 ECT - water temperature sensor
12 EGR - exhaust gas recirculation lift valve
20 Electrical load detector
22 VTEC pressure valve


code 6, coz your sensor could be faulty

code 12, coz you put a H22 in your Accord, but did you also install the EGR solenoid ??

code 20, coz Accords CD5 doesnt have ELD unit in the under dash fues box

code 22, I dont thing your engine has a Vtec pressure switch, if it does then make sure its wired up.

just remember that the ecu you are using is looking for these sensors that are not connected or do not exist in your car. best way around this would be to can the P13 and go for a P30 and a nice tune on a dyno :)

Quote:

---

Originally Posted by Blk-Em1

I got a few codes for the abs they were like 18, and a few other numbers in the 60s and 70s
and also which 02 sensor are you talking about? the exhaust or the air intake sensor?

---

dude there is only 1 type of O2 sensor, always found on the exhaust side of the car. the intake as a few other sensors, like MAP, IAT, TPS.

also with your code 18 read post 18 in this thread
you need to be more spacific with your 60's and 70's codes if you want to know more about them