Mine has 420K on the odometer from wht i can tell its had its usual logbook services at the decremented time. ive replaced an engine mount, but i know theres a couple of bushes that need replacing oh...
hi guys trying to work out the rotors "EG Esi" are these a 262mm or just a 240mm?
i have a 2003 Jazz 1.5. i have the EK4 Calipers but trying to work out what rotors.
Advice would be great..
I am running an S300 and im pretty sure they can support E85 now?
main reason ive been looking down this path is that my local honda dealers are trying to tell me that they can't get P73-00 aus spec...
I'm in the middle of a rebuild on my B18c7
Now ive been told that a P30 piston is going to give me a slightly higher CR than the P73-00 that come standard.
Has anyone done this? if so, is it worth...
cheers for that..
the daily driving would be like once like every 2 months or so..
but in saying what you just said im going to try and get the comp around 11.6, i however allready purchaced the...
well ive had too many ppl say that running over 12.5 is not good for a track car running at long periods. drags ok but not track as it will prolong the engine..
i do know if im going to be running...
ive already got the valves and the 3 layer gasket. its the pistons im really trying to work out. ive been told NOT to run ctr piston as i will have clearance...
so!!!!! the gearbox is out. new 4:9 fd all new Mfactory synchros. im now starting to look at close gear ratio set and upgrading the LSD.
ive also dsided to rebuild the motor.
this was 2 weeks after i had done the conversion.. the drag strip is at benaraby raceway up in central queensland.
Still running full trim and im pretty sure even the spare ws in the first run. low...
SO!!!! back in 2007 i was on here asking questions about doing a conversion B18C into my Ek1 hatch.
So i ended up buying a B18C7 half cut. done some reaserch and got all the bits i need and over a...
Cheers E240
as much as id like to put a plate clutch in.. the car is still street/Track, Not Track/street. when it comes off the road and im racing every month then the plate clutch will go in..
this is just for you tima attack civic isnt it josh?? only lakeside youd be worried about hitting something and if you are its going to hurt no matter what.. take em out and see how you go.. there...
Paul i wouldnt worry about the spin dude.. im pretty sure you had shitty tires on at that stage, the track was very silty. even my lap times were down for the first session.. but yea next time i...
big congratulations to time ware and his toda powerd DC5R
with winning the 2011 Queensland race driver championship..
and managed to obtain a new pb at lakeside during the race with a 58:59.
...
I've had my conversion since 2005 ek1 with b18c7 and I'm still running the d16y4 radiator. I also track my car at lakeside and QR I've had 1 issue with it overheating but that was due to following...