Search:

Has anyone purchased these radiators i bought one for my eg civic for use on a d16 but the inlet and outlet on the asi rad is bigger than stock i cant use my stock hoses if anyone has got one or...

yes but they are 4-1 headers and the d16 is 4-2-1 i want to take advantage of that i not to sure if it will do much in the way of performance anyone ?

Its not dangerous to take off just make sure you jack up the car and have it sitting on jack stands i had to take my whole assembly off once so that i could get a new lower ball joint installed saves...

Thank you DCLXVI i used a round file and dremel this was the final out come
http://i565.photobucket.com/albums/ss97/xmod/photo.jpg

it bolted up nice and everything lined up

i thought that i...

New issue raised tonight the d15b7 power steering bracket will not fit on to the d16y8 block. I guess i have to use the d16y8 pump and bracket but the Hi pressure power steering line will not fit...

yea they were just gotta make sure everything lines up first but all the ac and ps brackets fit from my d15b7 to my d16y8

i found the easiest way to engage reverse gear it to engage the clutch shift into first then move back to reverse you might need to do this a couple of times but since getting into that habit i very...

ah so now i have to source a vtec pressure switch hmm
i have heard that you can just use a jumper from d6 to a4 then connect a4 to the vtec spool solenoid has anyone done this ?

Hey everyone im having a few problems wiring vtec in my eg civic i know there are 2 wires that i have to run from the ecu A4 D6

From my understanding A4 connects to the the vtec spool solenoid but...

thanks guys i was able to fit the old brackets to the new motor only one thing i had to cut a little bit out of the timing cover to make it fit right hope it doesnt rub so finally i got the motor...

Im currently underway in swapping out my blown d15b7 motor to a d16y8 into a 93 eg civic hatchback. Has anyone done this swap before as im not sure with the engine mounts in regards to the left top...

Depends but usually it just comes with the engine loom / harness what ever you want to call it

no they dont i called them up today they said it was between 2 clutch kits but they wernt sure

Does anyone know the specs on the D16Y8 in regards to the clutch because i wish to get a xtreme one but the part numbers arnt lining up and if i purchase it i cannot refund :(

so if anyone has...

the car will be used as a daily
i was suggested by a friend to put a ek4 brake setup if i was to do the b16 swap

Hi everyone i recently purchased a 93 Eg Gli my first honda l:D
im planning to swap the d15 in the future to a b16 but for the time being i want to upgrade everything else such as brakes &...