Search:

Speak with your tuner, this has many variables, fuel type, ignition power available, use ( street or track, lower or upper rev range end ) and mostly, state of tune and inspecting them at intervals...

He would have thought what have i got to lose ; )

Given how useful this shop sounds, your comp issue might be as simple as valve clearances on that cylinder or the head shop havnt done the seats well, and I bet the cam timing is no where, as nearly...

Yep, looks good on std shootout mode so no overinflating there, solid.

Got the pic of the full sheet with rates and figures below it??

Do you have the dyno run sheet available??

Be good to see what dyno and ramp rates were used, but my stock B16 in a daily I have pumped out 94 kw atw on a conservative dyno, so with the sheet, it...

There are tons of options, type r's to smaller items from most manufacturers.

Being only a 300hp target, you wouldnt need anything to big. Whats the set-up exactly?

Wont affect shops at all, they will set a ramp/inertia rate and when in shootout mode, revert to those figures, those without the new software can just set the dyno to that figure and run it, so from...

Finally, the ramp rate lovers out there will be no longer, shortly Dyno Dynamics will be having a locked ramp rate shootout mode for power figures on dyno runs, whilst there will be other small...

Im sure viewing the invoice and prices of the S300's bought would quickly sort out if someone knew they were buying legit or dodge items and then passing them on, just like the kpro's that were going...

An M400 will work, so you would be up for selling the M48,

Motec also have better software for the 400/800 models where they have also incorperated Alpha N tuning, so if itbs come into the mix,...

As Adrian said, why a 86mm, its a 1 life block then, go 85mm, at 1 mm, the power difference would be not that much in capacity lost and then you have 3 builds from the block sleeving you have just...

Least Simmy's got it half right in a track wont tell you much about a cars power, nor will the drags really given weights and gearing, same dyno, same day, SAME RAMP RATES, then start comparing. Good...

I like this comment, one friend sells another a copy.

Now everyone can see why there are some people offering silly cheap kpro's, as they are fake and always come installed most of the time, look...

No worries, let us know when you drop 20k on a set of rods seeing you need the worlds best rods for your build. Go the forums!

Trick Titanium, Pankyl & Arrow to name a few, what motor, application & budget?

The heavier the rod the stronger the rod, but does weight concern you? If its a race motor and getting stripped...

He had to pay as he didnt let customs know that the engine was going for repair, if he did, there would have been no charges.

Do a search on this as it has been covered many times.

Dont know who told you that hondatas are not done by many in Sydney compared to a power fc.

I recommend you contact Toda on the forums...

Yes tegs i agree with you that there are plenty out there and they work, BUT, they also have a higher failure rate then the other ways of sleeving, and yes, Darton did produce mids for the RB26, they...

450 Still isnt a heap of power in a B series, the engine of question where a workshop was looking to sue the installer/machinist was Mid sleeves installed into a RB26 block. When they are pushing...

This is still about the Dart story, as you mentioned issues come fitment be that mids or whatever into an OEM block or Dart putting metal liners into their blocks, the OP had cooling issues and you...

Thats good to hear, but how many other mid sleeve builds do you know of and their issues, I know of about 10-15 and alot have had issues with sinking sleeves, it also depends on how much power your...

No worries, who and where are team customs? What is there normal line of work and will they be tuning it?

No prob, so can you let us know what you intend on doing to make this power and who is building it?

Crap, mid sleeves are the worst but Dart blocks are known for issues and seems your unlucky enough to have got one. Question is, if it goes again, what is Larry going to do for you?