Search:

For what is costs bout $30-$50 its piece of mind you are installing a nice smooth surface to a new clutch,will help to avoid any issues like clutch shudder,personally i think you be silly to not do...

Theres a guy near me that can regas them, prob around $50 ea,if u want to send them down to me,i can get them fixed up and posted back to you for a fee of course! will work out cheaper for u then...

bc br series are around $1500 and are well worth it

lmfaoooo

any other ideas? im stumped on what to do, sorta embarassing when this happens in a carpark full of people....:S

problem solved, had to adjust the pedal free play in the cmc rod!

Hey guys, i just changed my clutch master cylinder with a genuine OEM one as the old one was leaking fluid in the car, and now i have a clicking noise like in the video below...

does any1 have any...

aww :(

im not fussed if there 2nd hand as long as there not leaking etc prob $500

Something height and stiffness adjustable

Not the starter as ive replaced it with a good working one and it still does it, ive even bench tested it and the starter is fine

Ive inspected the teeth on the flywheel from the starter side and...

cheers ill give that a go

I can hear my fuel pump prime and my dizzy seems to be in good condition, ive even changed the rotor and cap not too long ago.... i think its my aftermarket flywheel ring gear.

Are the ring gears...

No before and after pics?

Yea I've got the whistle too haha, very common problem but nothing to worry about

ok ill try pressing in the clutch when i start it, what do u think is causing this?

Guys got a problem with my car since i bought it,on occasion when i go to start my car whether its cold or hot, i get a grinding noise as if the starter isnt engaging with the flywheel correctly... i...

i know he said it is an lsd,and he bought it to replace his ****ed gearbox in his ITR, his car has only done 100k kms, and i think he was using stock wheels.... speedo couldnt be out that much

anyway to identify a b16a box from the outside? any stampings or marks?

Mate that looks right and makes the most sense, i think it may be a b16a gearbox

anyway to confirm this, you could be right, as it would be a direct bolt up

Im running 205/50/15 and im not sure what my mates using but the tyre size wouldnt effect rpm by 400?

Could it really be out by 400rpm?

it must me the jdm itr 4.7 final drive gearbox?

Guys im having some issues figuring out final drives...my 2000 model audm ITR at 100kms revs at 3500rpm in 5th gear where as a friend of mine who has a 2000 model audm ITR as well says his car revs...

Hey guys, found a set of coilovers that i really like but it says it suits honda accord 1990-1997 would they also fit dc2r?